On Mon, May 11, 2015 at 12:59 AM, Stefano Babic <sba...@denx.de> wrote: > Hi Tim, > > On 09/05/2015 03:28, Tim Harvey wrote: >> The re-assignment of pcie_rst gpio for GW522x needs to occur earlier, before >> the PCI subsystem calls the toggle funciton. >> >> Signed-off-by: Tim Harvey <thar...@gateworks.com> >> --- >> board/gateworks/gw_ventana/gw_ventana.c | 8 ++++---- >> 1 file changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/board/gateworks/gw_ventana/gw_ventana.c >> b/board/gateworks/gw_ventana/gw_ventana.c >> index 554cd84..8cfc1f2 100644 >> --- a/board/gateworks/gw_ventana/gw_ventana.c >> +++ b/board/gateworks/gw_ventana/gw_ventana.c >> @@ -1184,10 +1184,6 @@ static void setup_board_gpio(int board) >> } >> >> #if !defined(CONFIG_CMD_PCI) >> - /* GW522x Uses GPIO3_IO23 for PCIE_RST# */ >> - if (board_type == GW52xx && info->model[4] == '2') >> - gpio_cfg[board].pcie_rst = IMX_GPIO_NR(3, 23); >> - > > This code runs now without #ifdef protection. Is it desired ?
Stefano, Yes - I did intend to remove the #ifdef protection. Regards, Tim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
