mxc_serial supports DM so lets use it.

Signed-off-by: Tim Harvey <thar...@gateworks.com>
---
 board/gateworks/gw_ventana/gw_ventana.c | 9 +++++++++
 include/configs/gw_ventana.h            | 1 +
 2 files changed, 10 insertions(+)

diff --git a/board/gateworks/gw_ventana/gw_ventana.c 
b/board/gateworks/gw_ventana/gw_ventana.c
index 8818be4..554cd84 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -22,6 +22,7 @@
 #include <asm/imx-common/sata.h>
 #include <asm/imx-common/spi.h>
 #include <asm/imx-common/video.h>
+#include <dm/platform_data/serial_mxc.h>
 #include <jffs2/load_kernel.h>
 #include <hwconfig.h>
 #include <i2c.h>
@@ -1820,3 +1821,11 @@ int ft_board_setup(void *blob, bd_t *bd)
 }
 #endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
 
+static struct mxc_serial_platdata ventana_mxc_serial_plat = {
+       .reg = (struct mxc_uart *)UART2_BASE,
+};
+
+U_BOOT_DEVICE(ventana_serial) = {
+       .name   = "serial_mxc",
+       .platdata = &ventana_mxc_serial_plat,
+};
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 20bc4dc..ea1848a 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -49,6 +49,7 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_DM
 #define CONFIG_DM_GPIO
+#define CONFIG_DM_SERIAL
 #define CONFIG_CMD_DM
 #endif
 
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to