We need to do any PMIC setup in the SPL if we are to bypass U-Boot for
falcon mode.
Signed-off-by: Tim Harvey <thar...@gateworks.com>
---
board/gateworks/gw_ventana/gw_ventana_spl.c | 3 +++
include/configs/gw_ventana.h | 1 +
2 files changed, 4 insertions(+)
diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c
b/board/gateworks/gw_ventana/gw_ventana_spl.c
index cde04cf..1873d99 100644
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -551,6 +551,9 @@ void spl_board_init(void)
default:
puts("Unknown boot device\n");
}
+
+ /* PMIC init */
+ setup_pmic();
}
void reset_cpu(ulong addr)
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index c61fbb9..ccf01e2 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -13,6 +13,7 @@
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
/* Location on MMC to read U-Boot from */
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* 69KB */
/* Location in NAND to read U-Boot from */
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
