The re-assignment of pcie_rst gpio for GW522x needs to occur earlier, before
the PCI subsystem calls the toggle funciton.
Signed-off-by: Tim Harvey <thar...@gateworks.com>
---
board/gateworks/gw_ventana/gw_ventana.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/board/gateworks/gw_ventana/gw_ventana.c
b/board/gateworks/gw_ventana/gw_ventana.c
index 554cd84..8cfc1f2 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -1184,10 +1184,6 @@ static void setup_board_gpio(int board)
}
#if !defined(CONFIG_CMD_PCI)
- /* GW522x Uses GPIO3_IO23 for PCIE_RST# */
- if (board_type == GW52xx && info->model[4] == '2')
- gpio_cfg[board].pcie_rst = IMX_GPIO_NR(3, 23);
-
/* assert PCI_RST# (released by OS when clock is valid) */
gpio_request(gpio_cfg[board].pcie_rst, "pci_rst#");
gpio_direction_output(gpio_cfg[board].pcie_rst, 0);
@@ -1435,6 +1431,10 @@ int board_init(void)
int count = gpio_cfg[board_type].num_pads;
imx_iomux_v3_setup_multiple_pads(p, count);
+
+ /* GW522x Uses GPIO3_IO23 for PCIE_RST# */
+ if (board_type == GW52xx && ventana_info.model[4] == '2')
+ gpio_cfg[board_type].pcie_rst = IMX_GPIO_NR(3, 23);
}
return 0;
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
