did you install munge?
On Mon, Oct 31, 2016 at 7:11 AM, Peixin Qiao <[email protected]> wrote: > Hi Lachlan, > > My slurm.conf is as follows: > > # slurm.conf file generated by configurator easy.html. > # Put this file on all nodes of your cluster. > # See the slurm.conf man page for more information. > # > ClusterName=peixin-Inspiron-660s > ControlMachine=peixin-Inspiron-660s > #ControlAddr= > # > AuthType=auth/none > CacheGroups=0 > CryptoType=crypto/openssl > #MailProg=/bin/mail > MpiDefault=none > #MpiParams=ports=#-# > ProctrackType=proctrack/pgid > ReturnToService=0 > SlurmctldPidFile=/var/run/slurmctld.pid > SlurmctldPort=6817 > SlurmdPidFile=/var/run/slurmd.pid > SlurmdPort=6818 > SlurmdSpoolDir=/var/spool/slurmd > SlurmUser=slurm > #SlurmdUser=root > StateSaveLocation=/var/spool > SwitchType=switch/none > TaskPlugin=task/none > # > # > # TIMERS > InactiveLimit=0 > KillWait=30 > MinJobAge=300 > SlurmctldTimeout=300 > SlurmdTimeout=300 > Waittime=0 > # > # SCHEDULING > FastSchedule=1 > SchedulerType=sched/backfill > SchedulerPort=7321 > SelectType=select/linear > # > # > # LOGGING AND ACCOUNTING > AccountingStorageType=accounting_storage/none > ClusterName=cluster > JobCompType=jobcomp/none > JobCredentialPrivateKey = /usr/local/etc/slurm.key > JobCredentialPublicCertificate = /usr/local/etc/slurm.cert > #JobAcctGatherFrequency=30 > JobAcctGatherType=jobacct_gather/peixin-Inspiron-660s > SlurmctldDebug=3 > #SlurmctldLogFile= > SlurmdDebug=3 > #SlurmdLogFile= > # > # > # COMPUTE NODES > NodeName=peixin-Inspiron-660s CPUs=4 RealMemory=5837 Sockets=4 > PartitionName=debug Nodes=peixin-Inspiron-660s Default=YES > > The result for command systemctl status slurmctld: > slurmctld.service > Loaded: not-found (Reason: No such file or directory) > Active: inactive (dead) > The result for command systemctl status slurmd: > slurmd.service > Loaded: not-found (Reason: No such file or directory) > Active: inactive (dead) > > > Best Regards, > Peixin > > On Sun, Oct 30, 2016 at 6:51 PM, Lachlan Musicman <[email protected]> wrote: >> >> I think it should. Can you send through your slurm.conf? >> >> Also, the logs usually explicitly say why slurmctld/slurmd don't start, >> and the best way to judge if slurm is running is with systemd: >> >> systemctl status slurmctl >> systemctl status slurmd >> >> >> >> cheers >> L. >> >> ------ >> The most dangerous phrase in the language is, "We've always done it this >> way." >> >> - Grace Hopper >> >> On 31 October 2016 at 10:34, Peixin Qiao <[email protected]> wrote: >>> >>> I installed slurm-16.05.6 on ubuntu 16.04 on one node. >>> >>> When I started slurmdctld and slurmd, it does not start. >>> >>> I input sinfo, the output is: slurm_load_partitions: Unable to contact >>> slurm controller (connect failure) >>> I input: ps -ef | grep slurm, there is no output. >>> >>> Best Regards, >>> Peixin >> >> >
