Hi Lachlan, My slurm.conf is as follows:
# slurm.conf file generated by configurator easy.html. # Put this file on all nodes of your cluster. # See the slurm.conf man page for more information. # ClusterName=peixin-Inspiron-660s ControlMachine=peixin-Inspiron-660s #ControlAddr= # AuthType=auth/none CacheGroups=0 CryptoType=crypto/openssl #MailProg=/bin/mail MpiDefault=none #MpiParams=ports=#-# ProctrackType=proctrack/pgid ReturnToService=0 SlurmctldPidFile=/var/run/slurmctld.pid SlurmctldPort=6817 SlurmdPidFile=/var/run/slurmd.pid SlurmdPort=6818 SlurmdSpoolDir=/var/spool/slurmd SlurmUser=slurm #SlurmdUser=root StateSaveLocation=/var/spool SwitchType=switch/none TaskPlugin=task/none # # # TIMERS InactiveLimit=0 KillWait=30 MinJobAge=300 SlurmctldTimeout=300 SlurmdTimeout=300 Waittime=0 # # SCHEDULING FastSchedule=1 SchedulerType=sched/backfill SchedulerPort=7321 SelectType=select/linear # # # LOGGING AND ACCOUNTING AccountingStorageType=accounting_storage/none ClusterName=cluster JobCompType=jobcomp/none JobCredentialPrivateKey = /usr/local/etc/slurm.key JobCredentialPublicCertificate = /usr/local/etc/slurm.cert #JobAcctGatherFrequency=30 JobAcctGatherType=jobacct_gather/peixin-Inspiron-660s SlurmctldDebug=3 #SlurmctldLogFile= SlurmdDebug=3 #SlurmdLogFile= # # # COMPUTE NODES NodeName=peixin-Inspiron-660s CPUs=4 RealMemory=5837 Sockets=4 PartitionName=debug Nodes=peixin-Inspiron-660s Default=YES The result for command systemctl status slurmctld: slurmctld.service Loaded: not-found (Reason: No such file or directory) Active: inactive (dead) The result for command systemctl status slurmd: slurmd.service Loaded: not-found (Reason: No such file or directory) Active: inactive (dead) Best Regards, Peixin On Sun, Oct 30, 2016 at 6:51 PM, Lachlan Musicman <[email protected]> wrote: > I think it should. Can you send through your slurm.conf? > > Also, the logs usually explicitly say why slurmctld/slurmd don't start, > and the best way to judge if slurm is running is with systemd: > > systemctl status slurmctl > systemctl status slurmd > > > > cheers > L. > > ------ > The most dangerous phrase in the language is, "We've always done it this > way." > > - Grace Hopper > > On 31 October 2016 at 10:34, Peixin Qiao <[email protected]> wrote: > >> I installed slurm-16.05.6 on ubuntu 16.04 on one node. >> >> When I started slurmdctld and slurmd, it does not start. >> >> I input sinfo, the output is: slurm_load_partitions: Unable to contact >> slurm controller (connect failure) >> I input: ps -ef | grep slurm, there is no output. >> >> Best Regards, >> Peixin >> > >
