Hello Jeong,
On 12.12.2012 08:54, Jeong Hyeon Kim wrote:
From: Jeong-Hyeon Kim
This patch adds pinmux support for I2C channels
Signed-off-by: Jeong-Hyeon Kim
---
arch/arm/cpu/armv7/exynos/pinmux.c | 51
1 file changed, 51 insertions(+)
similiar patch
Hi Scott,
> On 12/11/2012 01:56:25 AM, Lukasz Majewski wrote:
> > Hi Scott,
> >
> > > On 12/10/2012 09:24:32 AM, Pantelis Antoniou wrote:
> > > > + sprintf(cmd_buf, "nand %s %p %llx %llx",
> > > > + op == DFU_OP_READ ? "read" : "write",
> > > > +buf, start, cou
Hello, I have the following question. It is about the adresses
where the U-boot and Linux Kernel are copyed in the SDRAM from NAND.
In my board config file I have:
#define CONFIG_SYS_LOAD_ADDR0x2200/* load address */
Is that the load address of the U-boot?
A
This patch adds clock support for SATA
Signed-off-by: Vasanth Ananthan
---
arch/arm/cpu/armv7/exynos/clock.c | 64
arch/arm/include/asm/arch-exynos/clk.h |3 +-
2 files changed, 66 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/exynos/cl
This patch adds the macro definition of SATA controller and PHY controller
base addresses.
Signed-off-by: Vasanth Ananthan
---
arch/arm/include/asm/arch-exynos/cpu.h|3 +++
arch/arm/include/asm/arch-exynos/periph.h |1 +
2 files changed, 4 insertions(+)
diff --git a/arch/arm/include
This patch provides support for SATA in Exynos5250
Signed-off-by: Vasanth Ananthan
---
drivers/block/dwc_ahsata.c | 397 ++--
1 file changed, 387 insertions(+), 10 deletions(-)
diff --git a/drivers/block/dwc_ahsata.c b/drivers/block/dwc_ahsata.c
index c9
This patch adds required macros for enabling SATA.
Signed-off-by: Vasanth Ananthan
---
include/configs/smdk5250.h | 15 ---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index e412da8..67cdbe2 100644
--- a/inc
imls does not list the images in NAND devices. This patch implements this
support for legacy type images.
Signed-off-by: Vipin Kumar
---
Hello Scott,
There has been sometime since you reviewed the first version of this patch.
http://lists.denx.de/pipermail/u-boot/2012-November/139631.html
I am
+ ulong start = get_timer(0);
+
+ do {
+ ret = usb_get_port_status(dev, i + 1, portsts);
+ if (ret< 0) {
+ USB_HUB_PRINTF("get_port_status failed\n");
+ break;
+
Stefan, Wolfgang,
Can you please add relevant people if not present already in this mail
Regards
Vipin
On 12/6/2012 12:14 PM, Vipin KUMAR wrote:
Signed-off-by: Vipin Kumar
---
drivers/mmc/Makefile | 1 +
drivers/mmc/spear_sdhci.c | 44
2 f
Ping. Can I get a few Reviewed-by's :)
On 12/6/2012 1:35 PM, Stefan Roese wrote:
(Added Mike to Cc)
On 12/06/2012 07:56 AM, Vipin Kumar wrote:
From: Armando Visconti
This patch adds the support for the ARM PL022 SPI controller for the standard
variant (0x00041022), which has a 16bit wide and
ping
On 12/6/2012 12:40 PM, Vipin KUMAR wrote:
Do not select MIIPORT for RGMII interface
Signed-off-by: Vipin Kumar
---
drivers/net/designware.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index bf21a08..46f6601 1
ping
On 12/6/2012 2:52 PM, Vipin KUMAR wrote:
Certain ARMV7 cpus eg. CortexA9 contains a local and a global timer within the
CPU core itself. This patch adds generic support for local timer.
Signed-off-by: Vipin Kumar
---
arch/arm/cpu/armv7/Makefile | 11 ++-
arch/arm/cpu/armv7/ca9_l
On 12/06/2012 07:44 AM, Vipin Kumar wrote:
> Signed-off-by: Vipin Kumar
Looks good, so:
Acked-by: Stefan Roese
Thanks,
Stefan
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 12/06/2012 08:10 AM, Vipin Kumar wrote:
> Do not select MIIPORT for RGMII interface
>
> Signed-off-by: Vipin Kumar
Acked-by: Stefan Roese
Thanks,
Stefan
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
I didn't test..but it looks fine.
Acked-by: Jaehoon Chung
On 12/06/2012 03:44 PM, Vipin Kumar wrote:
> Signed-off-by: Vipin Kumar
> ---
> drivers/mmc/Makefile | 1 +
> drivers/mmc/spear_sdhci.c | 44
> 2 files changed, 45 insertions(+)
> crea
On 12/06/2012 07:56 AM, Vipin Kumar wrote:
> From: Armando Visconti
>
> This patch adds the support for the ARM PL022 SPI controller for the standard
> variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
>
> Signed-off-by: Armando Visconti
> Signed-off-by: Vipin Kumar
On 12/12/2012 3:48 PM, Stefan Roese wrote:
On 12/06/2012 07:56 AM, Vipin Kumar wrote:
From: Armando Visconti
This patch adds the support for the ARM PL022 SPI controller for the standard
variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
Signed-off-by: Armando Viscon
ping. one more :)
On 12/6/2012 12:40 PM, Vipin KUMAR wrote:
From: Shiraz Hashim
SPEAr310 and SPEAr320 Ethernet interfaces share same MDIO lines to control their
respective phys. Currently their is a fixed configuration in which only a
particular MAC can use the MDIO lines.
Call an arch specifi
On 12/06/2012 08:10 AM, Vipin Kumar wrote:
> From: Shiraz Hashim
>
> SPEAr310 and SPEAr320 Ethernet interfaces share same MDIO lines to control
> their
> respective phys. Currently their is a fixed configuration in which only a
> particular MAC can use the MDIO lines.
"there is" instead of "the
+
+/* SSP registers mapping */
+#define SSP_CR00x000
+#define SSP_CR10x004
+#define SSP_DR 0x008
+#define SSP_SR 0x00C
+#define SSP_CPSR 0x010
+#define SSP_IMSC 0x014
+#define SSP_RIS0x018
+#define SSP_MIS0
On 12/12/2012 4:37 PM, Stefan Roese wrote:
On 12/06/2012 08:10 AM, Vipin Kumar wrote:
From: Shiraz Hashim
SPEAr310 and SPEAr320 Ethernet interfaces share same MDIO lines to control their
respective phys. Currently their is a fixed configuration in which only a
particular MAC can use the MDIO li
On 12/12/2012 4:40 PM, Armando VISCONTI wrote:
+
+/* SSP registers mapping */
+#define SSP_CR0 0x000
+#define SSP_CR1 0x004
+#define SSP_DR 0x008
+#define SSP_SR 0x00C
+#define SSP_CPSR 0x010
+#define SSP_IMSC 0x014
+#define SSP_RIS 0x018
+#define SSP_MIS 0x01C
+#define SSP_ICR 0x020
+#define SSP
This patchset adds GPIO numbering feature where pinmux setting
can be done just by seding the pin munber and we do not have to
remember which bank it belongs to.
Rajeshwari Shinde (2):
S5P: GPIO: Add generic pin mumbering API's
EXYNOS5: Add gpio pin numbering feature
arch/arm/cpu/armv7/exyno
This patch adds API's to set config,drive and pull factor in
gpio pin mumbering feature.
Signed-off-by: Rajeshawari Shinde
---
drivers/gpio/s5p_gpio.c | 18 ++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
inde
On 12/12/2012 12:10 PM, Armando Visconti wrote:
+
+/* SSP registers mapping */
+#define SSP_CR0 0x000
+#define SSP_CR1 0x004
+#define SSP_DR0x008
+#define SSP_SR0x00C
+#define SSP_CPSR 0x010
+#define SSP_IMSC 0x01
This patch adds support for gpio pin numbering support on EXYNOS5
pinmux.
Signed-off-by: Leela Krishna Amudala
Signed-off-by: Rajeshwari Shinde
---
arch/arm/cpu/armv7/exynos/pinmux.c | 148 +
arch/arm/include/asm/arch-exynos/gpio.h | 360 ++-
2 fil
On 12/12/12 11:54, Vipin Kumar wrote:
>
>>> +ulong start = get_timer(0);
>>> +
>>> +do {
>>> +ret = usb_get_port_status(dev, i + 1, portsts);
>>> +if (ret< 0) {
>>> +USB_HUB_PRINTF("get_port_status failed\n");
>>> +break;
>>>
Dear Heiko,
Thanks for your concern.
I didn't know the patch.
It can be replaced my patch.
Thank you,
JHKIM
2012년 12월 12일 17:16, Heiko Schocher 쓴 글:
> Hello Jeong,
>
> On 12.12.2012 08:54, Jeong Hyeon Kim wrote:
>> From: Jeong-Hyeon Kim
>>
>> This patch adds pinmux support for I2C channels
>>
On 12/12/2012 5:10 PM, Igor Grinberg wrote:
On 12/12/12 11:54, Vipin Kumar wrote:
+ulong start = get_timer(0);
+
+do {
+ret = usb_get_port_status(dev, i + 1, portsts);
+if (ret< 0) {
+USB_HUB_PRINTF("get_port_status failed\n");
+
From: Armando Visconti
This patch adds the support for the ARM PL022 SPI controller for the standard
variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
Signed-off-by: Armando Visconti
Signed-off-by: Vipin Kumar
---
drivers/spi/Makefile| 1 +
drivers/spi/pl022_
On 12/12/2012 01:04 PM, Vipin Kumar wrote:
> From: Armando Visconti
>
> This patch adds the support for the ARM PL022 SPI controller for the standard
> variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
>
> Signed-off-by: Armando Visconti
> Signed-off-by: Vipin Kumar
Hi Joe,
2012/12/12 Joe Hershberger :
> serial_initialize() must be called after relocation to adjust the
> pointers to putc(), getc(), etc. This is busted ever since the
> serial driver-model-ification series.
>
> Signed-off-by: Joe Hershberger
> ---
> arch/mips/lib/board.c | 2 ++
> 1 file cha
mips_io_port_base is exported as 'extern const unsigned long mips_io_port_base;'
in arch/mips/include/asm/io.h. Thus make the variable const too.
Signed-off-by: Daniel Schwierzeck
---
arch/mips/lib/board.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/lib/board.c
From: Joe Hershberger
serial_initialize() must be called after relocation to adjust the
pointers to putc(), getc(), etc. This is busted ever since the
serial driver-model-ification series.
Signed-off-by: Joe Hershberger
Signed-off-by: Daniel Schwierzeck
---
Changes for v2:
- include to fix g
Hi Tom,
please pull two bugfixes for MIPS.
The following changes since commit ea40a05422bdc87a7af5dc349e8adce59f982e72:
MIPS: constify address pointer in test_bit() (2012-12-08 21:48:19 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-mips.git master
for you to fet
On Sat, Dec 08, 2012 at 11:54:13AM -0800, Simon Glass wrote:
> Hi Fabio,
>
> On Wed, Dec 5, 2012 at 5:30 PM, Fabio Estevam wrote:
> > On Wed, Dec 5, 2012 at 11:25 PM, Vadim Bendebury
> > wrote:
> >
> >> No - md/mw access memory, the new commands access the IO space (which
> >> is an x86 archite
On Wed, Dec 05, 2012 at 04:46:27PM -0800, Simon Glass wrote:
> This collection of patches to common/ adds the following:
>
> - EDID support for LCD displays
> - TPM stress test
> - gettime command to find out the time since boot
> - Adds coreboot information to the 'version' command
> - Fixes LMB
On Thu, Dec 06, 2012 at 04:33:33PM +0100, Stefano Babic wrote:
> On 06/12/2012 16:23, Lukasz Majewski wrote:
> > Do not compile in FDT related code, when it is not supported.
> >
> > Signed-off-by: Lukasz Majewski
> > Signed-off-by: Kyungmin Park
> > ---
> > common/cmd_spl.c |2 ++
> > 1 fi
On Tue, Dec 11, 2012 at 07:42:19AM +0100, Heiko Schocher wrote:
> Hello Tom,
>
> The following changes since commit fd4d564b3c80b111f18c93adb14233a6a7ddb0e9:
>
> Merge branch 'master' of git://git.denx.de/u-boot-x86 (2012-12-07 08:47:59
> -0700)
>
> are available in the git repository at:
>
On Tue, Dec 11, 2012 at 09:42:21PM -0600, Joe Hershberger wrote:
> Hi Thomas,
>
> On Tue, Dec 11, 2012 at 5:47 PM, Langer Thomas (LQDE RD ST PON SW)
> wrote:
> > Hello Joe,
> >
> > These patches for static initialization of the struct eth_ops will break
> > the drivers on any architecture which
Hi,
On Wed, Dec 12, 2012 at 8:33 PM, Rajeshwari Shinde
wrote:
> This patch adds support for gpio pin numbering support on EXYNOS5
> pinmux.
We already know that each exynos5 SoCs has different GPIO name and offsets.
So it's good time to use proper soc prefix. e.g., EXYNOS5250_*.
Since only exyno
Hi Tom,
On Wed, Dec 12, 2012 at 5:13 AM, Tom Rini wrote:
> On Wed, Dec 05, 2012 at 04:46:27PM -0800, Simon Glass wrote:
>
>> This collection of patches to common/ adds the following:
>>
>> - EDID support for LCD displays
>> - TPM stress test
>> - gettime command to find out the time since boot
>>
On Wed, Dec 12, 2012 at 02:00:33PM +0100, Daniel Schwierzeck wrote:
> Hi Tom,
>
> please pull two bugfixes for MIPS.
>
>
> The following changes since commit ea40a05422bdc87a7af5dc349e8adce59f982e72:
>
> MIPS: constify address pointer in test_bit() (2012-12-08 21:48:19 +0100)
>
> are availa
Hi,
On Tue, Dec 11, 2012 at 4:30 AM, Wolfgang Denk wrote:
> Dear Hatim Ali,
>
> In message <1355223289-15685-8-git-send-email-hatim...@samsung.com> you wrote:
>> From: Alim Akhtar
>>
>> Adds a new u-boot command to read current temprature from tmu driver.
>>
>> Signed-off-by: Alim Akhtar
>> Ack
Hi Hatim,
On Tue, Dec 11, 2012 at 4:43 AM, Wolfgang Denk wrote:
> Dear Hatim Ali,
>
> In message <1355223289-15685-4-git-send-email-hatim...@samsung.com> you wrote:
>> From: Akshay Saraswat
>>
>> Adding API in power for system shutdown when tripping value is reached
>> in Exynos Thermal Manageme
Hi,
On Tue, Dec 11, 2012 at 8:01 PM, Ajay Kumar wrote:
> This patch adds pinmux configuration for backlight, LCD reset
> and HPD for DP panel on Exynos5 SMDK.
>
> Signed-off-by: Ajay Kumar
> ---
> arch/arm/cpu/armv7/exynos/pinmux.c| 20
> arch/arm/include/asm/arch
Ciao Vipin,
On 12/12/2012 01:04 PM, Vipin KUMAR wrote:
From: Armando Visconti
This patch adds the support for the ARM PL022 SPI controller for the standard
variant (0x00041022), which has a 16bit wide and 8 locations deep TX/RX FIFO.
Have you tested this patch on the new variant as well?
You
Hi Wolfgang,
On Tue, Dec 11, 2012 at 4:39 AM, Wolfgang Denk wrote:
> Dear Hatim Ali,
>
> In message <1355223289-15685-5-git-send-email-hatim...@samsung.com> you wrote:
>> From: Akshay Saraswat
>>
>> Adding a generic polling function to continuously monitor events and
>> trigger actions correspon
Hi Hatim,
On Tue, Dec 11, 2012 at 2:52 AM, Hatim Ali wrote:
> Create a common configuration file for all exynos5250 based boards.
> Going forward we will be using DT based driver discovery for all the boards
> based on Exynos5. The different boards added will have there own config.h
> files
> wh
On Tue, Dec 11, 2012 at 2:52 AM, Hatim Ali wrote:
> Add the configuration file for exynos5250 based SMDK5250 board.
>
> Signed-off-by: Hatim Ali
Acked-by: Simon Glass
> ---
> Changes since v2:
> - No Change
>
> include/configs/smdk5250.h | 33 +
> 1 f
Hi Rajeshwari,
On Mon, Dec 10, 2012 at 3:55 AM, Rajeshwari Shinde
wrote:
> Moved the pmic_max77686.c max77686_pmic.h to drivers/power
> and made required changes accordingly
>
> Signed-off-by: Rajeshwari Shinde
Acked-by: Simon Glass
See nit below if you end up resending.
You might consider u
Hi Rajeshwari,
On Mon, Dec 10, 2012 at 3:55 AM, Rajeshwari Shinde
wrote:
> Enabled pmic MAX77686 for SMDK5250.
>
> Signed-off-by: Rajeshwari Shinde
With nit below fixed:
Acked-by: Simon Glass
> ---
> board/samsung/smdk5250/smdk5250.c | 15 +++
> include/configs/smdk5250.h
Hi Ajay,
On Tue, Dec 11, 2012 at 3:01 AM, Ajay Kumar wrote:
> With VPLL as source clock to FIMD,
> Exynos DP Initializaton was failing sometimes with unstable clock.
> Changing FIMD source to resolves this issue.
>
> Signed-off-by: Ajay Kumar
Acked-by: Simon Glass
At some point it would be ni
On Tue, Dec 11, 2012 at 3:01 AM, Ajay Kumar wrote:
> When only DP is used, we need not enable CONFIG_EXYNOS_MIPI_DSIM.
> Similarly, when only MIPI is used, we need not enable CONFIG_EXYNOS_DP.
> But the current structuring of code forces us to enable both
> CONFIG_EXYNOS_MIPI_DSIM and CONFIG_EXYNO
Hi Rajeshwari,
On Mon, Dec 3, 2012 at 5:30 AM, Rajeshwari Shinde
wrote:
> This patch adds the device node required for USB
>
> Signed-off-by: Vivek Gautam
> ---
> arch/arm/dts/exynos5250.dtsi |6 ++
> 1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/dts/exynos5
Hi Ajay,
On Tue, Dec 11, 2012 at 3:01 AM, Ajay Kumar wrote:
> Add panel_info structure required by LCD driver
> and DP panel platdata for SMDK5250.
> Enable FIMD and DP support on SMDK5250.
> DP Panel size: 2560x1600.
> We use 16BPP resolution to get LCD console.
>
> Signed-off-by: Ajay Kumar
A
Hi Simon,
On Wed, Dec 12, 2012 at 12:01 PM, Simon Glass wrote:
> Hi Jagan,
>
> On Mon, Dec 10, 2012 at 10:37 PM, Jagan Teki wrote:
>> Hi Simon,
>>
>> I understand your concern.
>>
>> But currently there is no prints a/f reading/writing/erasing the SPI flash.
>> User's are unable to confirm wheth
Hi Simon,
On Wed, Dec 12, 2012 at 12:03 PM, Simon Glass wrote:
> Hi,
>
> On Mon, Dec 10, 2012 at 6:41 AM, Jagannadha Sutradharudu Teki
> wrote:
>> This patch adds a print message on spi_flash_cmd_read_fast()
>> to make sure that how many bytes read from flash device.
>>
>> Signed-off-by: Jaganna
On Tue, Dec 11, 2012 at 3:01 AM, Ajay Kumar wrote:
> Currently, exynos FIMD driver is being used to support only TIZEN LOGOs.
> In order to get LCD console, we need to enable half word swap feature
> of FIMD and use 16 BPP.
>
> Signed-off-by: Ajay Kumar
Eventual FDT support should help to remove
Add support for Numonyx N25Q064 SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki
---
drivers/mtd/spi/stmicro.c |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c
index 30b626a..9ec938a 100644
--- a/drivers/mtd
Hi Hatim,
On Tue, Dec 11, 2012 at 2:54 AM, Hatim Ali wrote:
> From: Akshay Saraswat
>
> Fdt entry for Exynos TMU driver specific pre-defined values used for
> calibration of current temperature and defining threshold values.
>
> Signed-off-by: Akshay Saraswat
> Acked-by: Simon Glass
>
> diff -
On Tue, Dec 11, 2012 at 3:34 PM, Tom Warren wrote:
> Common Tegra files are in arch-tegra, shared between T20 and T30.
> Tegra30-specific headers are in arch-tegra30. Note that some of
> these will be filled in as more T30 support is added (drivers,
> WB/LP0 support, etc.). A couple of Tegra20 fil
On Tue, Dec 11, 2012 at 3:34 PM, Tom Warren wrote:
> This provides SPL support for T30 boards - AVP early init, plus
> CPU (A9) init/jump to main U-Boot.
>
> Some changes were made to Tegra20 cpu.c to move common routines
> into tegra-common/cpu.c and reduce code duplication.
>
> Signed-off-by: To
Hi Jagan,
On Wed, Dec 12, 2012 at 6:43 AM, Jagan Teki wrote:
> Hi Simon,
>
> On Wed, Dec 12, 2012 at 12:01 PM, Simon Glass wrote:
>> Hi Jagan,
>>
>> On Mon, Dec 10, 2012 at 10:37 PM, Jagan Teki
>> wrote:
>>> Hi Simon,
>>>
>>> I understand your concern.
>>>
>>> But currently there is no prints
Hi,
On Wed, Dec 12, 2012 at 5:17 AM, Kyungmin Park wrote:
> Hi,
>
> On Wed, Dec 12, 2012 at 8:33 PM, Rajeshwari Shinde
> wrote:
>> This patch adds support for gpio pin numbering support on EXYNOS5
>> pinmux.
>
> We already know that each exynos5 SoCs has different GPIO name and offsets.
> So it'
Hi Simon,
On Wed, Dec 12, 2012 at 8:31 PM, Simon Glass wrote:
> Hi Jagan,
>
> On Wed, Dec 12, 2012 at 6:43 AM, Jagan Teki wrote:
>> Hi Simon,
>>
>> On Wed, Dec 12, 2012 at 12:01 PM, Simon Glass wrote:
>>> Hi Jagan,
>>>
>>> On Mon, Dec 10, 2012 at 10:37 PM, Jagan Teki
>>> wrote:
Hi Simon,
Hi Simon,
On Wed, Dec 12, 2012 at 12:05 PM, Simon Glass wrote:
> Hi,
>
> On Mon, Dec 10, 2012 at 6:42 AM, Jagannadha Sutradharudu Teki
> wrote:
>> This patch provides support to program a flash config register.
>>
>> Configuration register contains the control bits used to configure
>> the diffe
+Mike who is the maintainer
On Wed, Dec 12, 2012 at 7:16 AM, Jagan Teki wrote:
> Hi Simon,
>
> On Wed, Dec 12, 2012 at 8:31 PM, Simon Glass wrote:
>> Hi Jagan,
>>
>> On Wed, Dec 12, 2012 at 6:43 AM, Jagan Teki wrote:
>>> Hi Simon,
>>>
>>> On Wed, Dec 12, 2012 at 12:01 PM, Simon Glass wrote:
>>
Hi Jagan,
On Wed, Dec 12, 2012 at 7:20 AM, Jagan Teki wrote:
> Hi Simon,
>
> On Wed, Dec 12, 2012 at 12:05 PM, Simon Glass wrote:
>> Hi,
>>
>> On Mon, Dec 10, 2012 at 6:42 AM, Jagannadha Sutradharudu Teki
>> wrote:
>>> This patch provides support to program a flash config register.
>>>
>>> Conf
Allen,
On Tue, Dec 11, 2012 at 5:45 PM, Allen Martin wrote:
> On Tue, Dec 11, 2012 at 03:34:15PM -0800, Tom Warren wrote:
>> These files are used by both SPL and main U-Boot.
>> Also made minor changes to shared Tegra code to support
>> T30 differences.
>>
>> Signed-off-by: Tom Warren
>> ---
>>
Hi Simon,
On Wed, Dec 12, 2012 at 8:53 PM, Simon Glass wrote:
> Hi Jagan,
>
> On Wed, Dec 12, 2012 at 7:20 AM, Jagan Teki wrote:
>> Hi Simon,
>>
>> On Wed, Dec 12, 2012 at 12:05 PM, Simon Glass wrote:
>>> Hi,
>>>
>>> On Mon, Dec 10, 2012 at 6:42 AM, Jagannadha Sutradharudu Teki
>>> wrote:
Stephen,
On Tue, Dec 11, 2012 at 5:36 PM, Stephen Warren wrote:
> On 12/11/2012 04:34 PM, Tom Warren wrote:
>> Common Tegra files are in arch-tegra, shared between T20 and T30.
>> Tegra30-specific headers are in arch-tegra30. Note that some of
>> these will be filled in as more T30 support is add
Stephen,
On Tue, Dec 11, 2012 at 5:40 PM, Stephen Warren wrote:
> On 12/11/2012 04:34 PM, Tom Warren wrote:
>> This provides SPL support for T30 boards - AVP early init, plus
>> CPU (A9) init/jump to main U-Boot.
>>
>> Some changes were made to Tegra20 cpu.c to move common routines
>> into tegra-
Dear Vipin Kumar,
> >> + ulong start = get_timer(0);
> >> +
> >> + do {
> >> + ret = usb_get_port_status(dev, i + 1, portsts);
> >> + if (ret< 0) {
> >> + USB_HUB_PRINTF("get_port_status failed\n");
> >> +
Hi Simon,
On Wed, Dec 12, 2012 at 12:11 PM, Simon Glass wrote:
> Hi,
>
> On Mon, Dec 10, 2012 at 6:42 AM, Jagannadha Sutradharudu Teki
> wrote:
>> This patch provides support to program a flash using
>> Quad-input Page Program(32h) instruction.
>>
>> This will effectively increases the data tran
Dear Tom Rini,
> On 12/10/12 19:47, Marek Vasut wrote:
> > Dear Lukasz Majewski,
> >
> >> Pantelis,
> >
> > [...]
> >
> > Hm hm ... I suspect it'd be nice to have a separate DFU custodian.
> > That'd leverage some burden from me. I like that idea. I wonder if
> > it'd be nice to start building
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 12/12/12 12:55, Marek Vasut wrote:
> Dear Tom Rini,
>
>> On 12/10/12 19:47, Marek Vasut wrote:
>>> Dear Lukasz Majewski,
>>>
Pantelis,
>>>
>>> [...]
>>>
>>> Hm hm ... I suspect it'd be nice to have a separate DFU
>>> custodian. That'd lever
Dear Vipin Kumar,
In message
you wrote:
> imls does not list the images in NAND devices. This patch implements this
> support for legacy type images.
...
> -static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +static void do_imls_flash(void)
Why is this void? Shoul
Dear Simon Glass,
In message
you wrote:
>
> > Do we really need a new command here?
> >
> > We already have dtt, which basicly does the same.
> >
> > It makes no sense to add new commands for each new device, all doing
> > basicly trhe same, just in an incompatible way.
>
> This patch feature
Dear Simon Glass,
In message
you wrote:
>
> > If we add something like this, it should be general enough to be used
> > by other systems as well, i. e. please chose a generic API like plain
> > poweroff() or similar.
>
> Maybe rename the function and move to a new include/power.h header,
> wit
Dear Simon Glass,
In message
you wrote:
>
> >If anything like this gets implemented, it has to be done in a way
> >that will be general enough to be useful to others as well.
>
> Yes. It isn't really clear how this sort of thing should be done, but
> creating a board polling function s
Static variables should be defined in C files, not header files, because
otherwise every C file that #includes the header file will generate a
duplicate of the variables. Since the vsc3316_xxx[] arrays are only
used by t4qds.c anyway, just put the variables there.
Signed-off-by: Timur Tabi
---
Hi Wolfgang,
On Wed, Dec 12, 2012 at 12:44 PM, Wolfgang Denk wrote:
> Dear Simon Glass,
>
> In message
> you
> wrote:
>>
>> >If anything like this gets implemented, it has to be done in a way
>> >that will be general enough to be useful to others as well.
>>
>> Yes. It isn't really cle
On 12/12/2012 02:11:46 AM, Martin Peevski wrote:
Hello, I have the following question. It is about the adresses
where the U-boot and Linux Kernel are copyed in the SDRAM from NAND.
In my board config file I have:
#define CONFIG_SYS_LOAD_ADDR0x2200/* load address
Dear Lukasz Majewski,
> Hi Pantelis,
>
> > Tomorrow I will prepare output of USB Ellisys analizer on my side, so
> > we could get clue what is going on.
>
> Please find attached output from USB ellisys analizer.
>
> (It is possible to download WinXP based program to view logs without
> USB anal
Dear Robert P. J. Day,
> On Tue, 11 Dec 2012, Lukasz Majewski wrote:
> > Hi Pantelis,
> >
> > > Tomorrow I will prepare output of USB Ellisys analizer on my side, so
> > > we could get clue what is going on.
> >
> > Please find attached output from USB ellisys analizer.
>
> is it really appro
On 12/12/2012 09:23 AM, Tom Warren wrote:
> Stephen,
>
> On Tue, Dec 11, 2012 at 5:36 PM, Stephen Warren wrote:
>> On 12/11/2012 04:34 PM, Tom Warren wrote:
>>> Common Tegra files are in arch-tegra, shared between T20 and T30.
>>> Tegra30-specific headers are in arch-tegra30. Note that some of
>>
On 12/12/2012 09:14 AM, Tom Warren wrote:
> Allen,
>
> On Tue, Dec 11, 2012 at 5:45 PM, Allen Martin wrote:
>> On Tue, Dec 11, 2012 at 03:34:15PM -0800, Tom Warren wrote:
>>> These files are used by both SPL and main U-Boot.
>>> Also made minor changes to shared Tegra code to support
>>> T30 diff
On 12/11/2012 04:34 PM, Tom Warren wrote:
> These files are used by both SPL and main U-Boot.
> Also made minor changes to shared Tegra code to support
> T30 differences.
Reviewed-by: Stephen Warren
(briefly!)
___
U-Boot mailing list
U-Boot@lists.denx
On 12/11/2012 04:34 PM, Tom Warren wrote:
> These are stripped down for bringup, They'll be filled out later
> to match-up with the kernel DT contents, and/or as devices are
> brought up (mmc, usb, spi, etc.).
> diff --git a/board/nvidia/dts/tegra30-cardhu.dts
> b/board/nvidia/dts/tegra30-cardhu.
Dear Simon Glass,
In message
you wrote:
>
> > Also, this should not be considered as somethin board specific as the
> > name "board polling function" might suggest. What is being discussed
> > here is not more and not less than support for periodic, asynchronous
> > services. So let's call it
On 12/11/2012 04:34 PM, Tom Warren wrote:
> This patch adds basic Tegra30 (T30) build support - no specific
> board is targeted.
Reviewed-by: Stephen Warren
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On 12/11/2012 04:34 PM, Tom Warren wrote:
> This build is stripped down. It boots to the command prompt.
> GPIO is the only peripheral supported. Others TBD.
>
> include/configs/tegra-common.h now holds common config options
> for Tegra SoCs.
Reviewed-by: Stephen Warren
On Wed, Dec 12, 2012 at 6:46 AM, Jagan Teki wrote:
> Hi Simon,
>
> On Wed, Dec 12, 2012 at 12:03 PM, Simon Glass wrote:
>> Hi,
>>
>> On Mon, Dec 10, 2012 at 6:41 AM, Jagannadha Sutradharudu Teki
>> wrote:
>>> This patch adds a print message on spi_flash_cmd_read_fast()
>>> to make sure that how
Hi Jagan,
On Wed, Dec 12, 2012 at 8:21 AM, Jagan Teki wrote:
> Hi Simon,
>
> On Wed, Dec 12, 2012 at 8:53 PM, Simon Glass wrote:
>> Hi Jagan,
>>
>> On Wed, Dec 12, 2012 at 7:20 AM, Jagan Teki wrote:
>>> Hi Simon,
>>>
>>> On Wed, Dec 12, 2012 at 12:05 PM, Simon Glass wrote:
Hi,
O
Hi Jagan,
On Wed, Dec 12, 2012 at 8:52 AM, Jagan Teki wrote:
> Hi Simon,
>
> On Wed, Dec 12, 2012 at 12:11 PM, Simon Glass wrote:
>> Hi,
>>
>> On Mon, Dec 10, 2012 at 6:42 AM, Jagannadha Sutradharudu Teki
>> wrote:
>>> This patch provides support to program a flash using
>>> Quad-input Page Pro
Hi Tom,
On Tue, Dec 11, 2012 at 7:05 PM, Allen Martin wrote:
> On Tue, Dec 11, 2012 at 03:34:11PM -0800, Tom Warren wrote:
>> This patch series adds basic (boot to cmd prompt) support for Tegra30.
>> This is based on the Tegra20 SPL, which initializes the AVP (ARM7TDMI)
>> boot proc) first, then
On 12/12/2012 03:20:24 AM, Vipin Kumar wrote:
imls does not list the images in NAND devices. This patch implements
this
support for legacy type images.
Signed-off-by: Vipin Kumar
---
Hello Scott,
There has been sometime since you reviewed the first version of this
patch.
http://lists.denx
Stephen,
On Wed, Dec 12, 2012 at 3:02 PM, Stephen Warren wrote:
> On 12/12/2012 09:23 AM, Tom Warren wrote:
>> Stephen,
>>
>> On Tue, Dec 11, 2012 at 5:36 PM, Stephen Warren
>> wrote:
>>> On 12/11/2012 04:34 PM, Tom Warren wrote:
Common Tegra files are in arch-tegra, shared between T20 and
1 - 100 of 130 matches
Mail list logo
