On 12/12/2012 12:10 PM, Armando Visconti wrote: >>>> + >>>> +/* SSP registers mapping */ >>>> +#define SSP_CR0 0x000 >>>> +#define SSP_CR1 0x004 >>>> +#define SSP_DR 0x008 >>>> +#define SSP_SR 0x00C >>>> +#define SSP_CPSR 0x010 >>>> +#define SSP_IMSC 0x014 >>>> +#define SSP_RIS 0x018 >>>> +#define SSP_MIS 0x01C >>>> +#define SSP_ICR 0x020 >>>> +#define SSP_DMACR 0x024 >>>> +#define SSP_ITCR 0x080 >>>> +#define SSP_ITIP 0x084 >>>> +#define SSP_ITOP 0x088 >>>> +#define SSP_TDR 0x08C >>> >>> Please use C-structs instead to access the registers. >>> >> >> May be this patch is a ripped version from linux. That's why >> Thanks. I will do this in v2 >> > > Yes, > I took this part from the linux pl022 driver. > > Never understood which way (C-struct or defines) is preferable > and why...
U-Boot is here more strict than Linux here. Using C-struct's enables type-checking. So thats the preferred way. Thanks, Stefan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot