Dear Rajeshwari Shinde,
On 20 June 2012 20:11, Rajeshwari Shinde wrote:
> MPLL clock-out of Exynos5250 Rev 1.0 is always at 1.6GHz.
> Adjust the divisor value to get 800MHz as needed by devices
> like UART etc
>
> Signed-off-by: Hatim Ali
> Signed-off-by: Rajeshwari Shinde
> ---
> Chnages in V2
On 20 June 2012 20:11, Rajeshwari Shinde wrote:
> This patch sets UART3 and MMC channle 0 for Exynos5250 Rev 1.0
Please fix typo channle -> channel.
>
> Signed-off-by: Rajeshwari Shinde
> ---
> Chnages in V2:
> - None
> board/samsung/smdk5250/smdk5250.c | 6 +++---
> include/configs/
Hello,
(2012/06/26 9:50), Tetsuyuki Kobayashi wrote:
> (06/26/2012 06:34 AM), Wolfgang Denk wrote:
>
>> In message<4fe85b13.5080...@kmckk.co.jp> you wrote:
>>> I tried nfs command on KZM-A9-GT board and it fails every time with "ERROR:
>>> Cannot umount".
>>
>> KZM-A9-GT board? This is an out
2012/6/25 Stephan Linz :
> Am Montag, den 25.06.2012, 09:22 +0200 schrieb Wolfgang Denk:
>> Dear Michal Simek,
>>
>> In message <4fe7f154.80...@monstr.eu> you wrote:
>> > On 06/21/2012 09:42 PM, Stephan Linz wrote:
>> > > To save memory the UBIFS is disabled by default.
>> > >
>> > > The original p
Dear Tetsuyuki Kobayashi,
In message <4fe9711a.2090...@kmckk.co.jp> you wrote:
>
> >> Are you sure the problems are not in the board specific code?
> > OK. I will try the same thing on an in-tree board (maybe, panda board) to
> > check if this is board specific or not.
>
> I did on a panda boar
2012/6/25 Stephan Linz :
> Am Montag, den 25.06.2012, 06:55 +0200 schrieb Michal Simek:
>> On 06/21/2012 09:42 PM, Stephan Linz wrote:
>> > Use XILINX_FLASH_START to set/unset FLASH and RAMENV.
>> >
>> > Error was:
>> > board.c: In function 'board_init':
>> > board.c:134: error: 'XILINX_FLASH_START
> -Original Message-
> From: Tom Rini [mailto:tom.r...@gmail.com] On Behalf Of Rini, Tom
> Sent: Friday, June 22, 2012 9:34 PM
> To: Sohanpal, Harman
> Cc: u-boot@lists.denx.de; s...@denx.de; Gene Zarkhin
> Subject: Re: [U-Boot] [PATCH v2 1/3] AM335x : Add USB support for AM335x
> in u-bo
> -Original Message-
> From: Tom Rini [mailto:tom.r...@gmail.com] On Behalf Of Rini, Tom
> Sent: Friday, June 22, 2012 9:25 PM
> To: Sohanpal, Harman
> Cc: u-boot@lists.denx.de; s...@denx.de
> Subject: Re: [U-Boot] [PATCH v2 2/3] AM335x : Configs to add USB host
> support.
>
> On Fri, Ju
These patches add USB support in u-boot for AM335x.
I have tested this code on AM335x evm and beaglebone in
the host mode using mass storage class.
For device mode, I have tested this on beaglebone using
usbtty. CONFIG_MUSB_HCD has been enabled by default
to make USB work in host mode.
Gene Zar
Adds required configs in config file for
am335x_evm to add support for usb host mode.
To enable USB device mode, add CONFIG_MUSB_UDC in
place of CONFIG_MUSB_HCD.
Tested using usbtty for device mode and
mass storage for host mode.
Signed-off-by: Harman Sohanpal
---
Changes for v2:
- #defin
Fix the compile warning :
implicit declaration of musb_platform_init
when CONFIG_MUSB_UDC is defined.
The extern musb_platform_init was declared in musb_hcd.h
but no such extern function was declared for musb_udc.
So a common function has been declared in musb_core.h
which can be used for both host
From: Gene Zarkhin
Adds USB support in uboot for AM335x.
By default the USB 1 module is enabled.
The support for USB 0 can be enabled by changing the
USB base address and the phy control register address
in the header file am335x.h.
USB 1 has a full size connector so acts in host mode and
USB 0 h
Add support for command line "usb reset" or "usb start" to initialize
, "usb stop" to stop multiple USB controllers at once.
Other commands like "usb tree" also support multiple controllers.
New added definitions to be defined in header file are:
CONFIG_USB_INIT_MULTI
CONFIG_USB_MAX_CONTROLLER_COU
On Thu, 21 Jun 2012 09:37:09 +0200
Christian Riesch wrote:
> Hi Mikhail,
>
> On Tue, Jun 12, 2012 at 11:15 PM, Mikhail Kshevetskiy
> wrote:
> > follow section 15.2.13.1 (Initializing Following Device Power Up or Reset)
> > of
> > OMAP-L138 DSP+ARM Processor Technical Reference Manual
>
> Than
follow section 15.2.13.1 (Initializing Following Device Power Up or Reset) of
OMAP-L138 DSP+ARM Processor Technical Reference Manual
Signed-off-by: Mikhail Kshevetskiy
---
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 26 +--
arch/arm/include/asm/arch-davinci/hardware.h
also fix NS16550_init() as we need 16x divider
Signed-off-by: Mikhail Kshevetskiy
---
drivers/serial/ns16550.c |2 +-
include/ns16550.h|9 +
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 0c23955..f
current code does not support spi flashes that have 0x90 read_id command,
so fix this
Signed-off-by: Mikhail Kshevetskiy
---
drivers/mtd/spi/spi_flash.c | 66 +++---
drivers/mtd/spi/spi_flash_internal.h |1 +
2 files changed, 47 insertions(+), 20 deleti
Signed-off-by: Mikhail Kshevetskiy
---
arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c |5 +
arch/arm/include/asm/arch-davinci/hardware.h|1 +
arch/arm/include/asm/arch-davinci/pinmux_defs.h |1 +
3 files changed, 7 insertions(+)
diff --git a/arch/arm/cpu/arm926ejs/davinci/da
Signed-off-by: Mikhail Kshevetskiy
---
drivers/mmc/mmc.c |2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index aebe578..69df64a 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1253,7 +1253,9 @@ int mmc_startup(struct mmc *mmc)
current SST driver does not support well this types of flash, so use
linux-3.3 code as a base.
Signed-off-by: Mikhail Kshevetskiy
---
drivers/mtd/spi/Makefile |3 +-
drivers/mtd/spi/spi_flash.c |3 +
drivers/mtd/spi/spi_flash_internal.h |1 +
drivers/mtd/spi/sst2
These patches add CPSW switch driver and enable support for it
on TI AM335x based boards. This version is rebased on top of
u-boot-ti/next. Also now CPSW driver uses internal controller
memory for DMA descriptors so coherent allocator is no longer
a requirement for this series.
The second part of
From: Chandan Nath
This patch adds platform-specific initialization for CPSW
switch on TI AM33XX SoCs.
CC: Tom Rini
Signed-off-by: Ilya Yanok
---
Changes from V1:
- rebased to u-boot-ti/next
arch/arm/cpu/armv7/am33xx/clock.c |8 +++-
arch/arm/include/asm/arch-am33xx/cpu.h
From: Chandan Nath
This patch adds pin mux settings for CPSW switch found on
TI AM335X based boards (MII and RGMII modes).
CC: Tom Rini
Signed-off-by: Ilya Yanok
---
Changes from V1:
- rebased to u-boot-ti/next
arch/arm/include/asm/arch-am33xx/common_def.h |2 ++
board/ti/am335x/mux.c
Read the on-board EEPROM during startup to detect the version
of the board we are running on (as for now only BeagleBone vs
EVM detection is supported).
CC: Tom Rini
Signed-off-by: Ilya Yanok
---
Changes from V1:
- rebased to u-boot-ti/next
board/ti/am335x/evm.c | 72 +++
This patch adds support for networking in SPL. Some devices are
capable of loading SPL via network so it makes sense to load the
main U-Boot binary via network too. This patch tries to use
existing network code as much as possible. Unfortunately, it depends
on environment which in turn depends on o
From: Chandan Nath
This patch adds board-specific initialization for CPSW on
TI AM335X based boards. Tested on BeagleBone.
CC: Tom Rini
Signed-off-by: Ilya Yanok
---
Changes from V1:
- rebased to u-boot-ti/next
board/ti/am335x/evm.c| 91 ++
From: Cyril Chemparathy
CPSW is an on-chip ethernet switch that is found on various SoCs from Texas
Instruments. This patch adds a simple driver (based on the Linux driver) for
this hardware module.
This patch also adds support to clean and flush dcache during packet send
and receive.
Changes
This patch adds support for networking in SPL on TI AM335x based
boards.
CC: Tom Rini
Signed-off-by: Ilya Yanok
---
board/ti/am335x/evm.c| 12
include/configs/am335x_evm.h |5 -
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/board/ti/am335x/evm.c b
From: Alagu Sankar
This is a Linux command line tool specific to TI's Davinci platforms, for
flashing UBL (User Boot Loader), u-boot and u-boot Environment in the MMC/SD
card. This MMC/SD card can be used for booting Davinci platforms that supports
MMC/SD boot option.
This patch was submitted by
Signed-off-by: Marek Vasut
Cc: Prafulla Wadaskar
Cc: Wolfgang Denk
---
arch/arm/cpu/arm926ejs/kirkwood/dram.c|2 --
arch/arm/include/asm/arch-kirkwood/kirkwood.h |4
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c
b/arc
This function shall allow a board to adjust DRAM parameters in case
there are multiple versions of the board with different DRAM sizes.
Signed-off-by: Marek Vasut
Cc: Prafulla Wadaskar
Cc: Wolfgang Denk
---
arch/arm/cpu/arm926ejs/kirkwood/dram.c | 11 +++
1 file changed, 11 insertion
Signed-off-by: Marek Vasut
Cc: Prafulla Wadaskar
Cc: Wolfgang Denk
---
board/karo/tk71/Makefile | 45 +++
board/karo/tk71/kwbimage.cfg | 174 +
board/karo/tk71/tk71.c | 178 ++
boards.cfg
Dear Bo Shen,
> Some Atmel SoC support USB EHCI, add the EHCI driver to support it.
>
> To enable the USB EHCI, add the following configuration options into
> board relative configuration file and remove USB OHCI options.
>
> #define CONFIG_USB_EHCI
> #define CONFIG_USB_EHCI_ATMEL
>
> -Original Message-
> From: Marek Vasut [mailto:ma...@denx.de]
> Sent: 26 June 2012 17:45
> To: u-boot@lists.denx.de
> Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
> Subject: [PATCH 2/3] KW: Add kw_adjust_dram() weak function
>
> This function shall allow a board to adjust DRAM par
> -Original Message-
> From: Marek Vasut [mailto:ma...@denx.de]
> Sent: 26 June 2012 17:45
> To: u-boot@lists.denx.de
> Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
> Subject: [PATCH 3/3] Kirkwood: Add support for Ka-Ro TK71
>
> Signed-off-by: Marek Vasut
> Cc: Prafulla Wadaskar
>
Dear Prafulla Wadaskar,
> > -Original Message-
> > From: Marek Vasut [mailto:ma...@denx.de]
> > Sent: 26 June 2012 17:45
> > To: u-boot@lists.denx.de
> > Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
> > Subject: [PATCH 3/3] Kirkwood: Add support for Ka-Ro TK71
> >
> > Signed-off-by:
Dear Prafulla Wadaskar,
> > -Original Message-
> > From: Marek Vasut [mailto:ma...@denx.de]
> > Sent: 26 June 2012 17:45
> > To: u-boot@lists.denx.de
> > Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
> > Subject: [PATCH 2/3] KW: Add kw_adjust_dram() weak function
> >
> > This function
> -Original Message-
> From: Marek Vasut [mailto:ma...@denx.de]
> Sent: 26 June 2012 18:18
> To: Prafulla Wadaskar
> Cc: u-boot@lists.denx.de; Wolfgang Denk
> Subject: Re: [PATCH 2/3] KW: Add kw_adjust_dram() weak function
>
> Dear Prafulla Wadaskar,
>
> > > -Original Message-
>
> -Original Message-
> From: Marek Vasut [mailto:ma...@denx.de]
> Sent: 26 June 2012 18:15
> To: Prafulla Wadaskar
> Cc: u-boot@lists.denx.de; Wolfgang Denk
> Subject: Re: [PATCH 3/3] Kirkwood: Add support for Ka-Ro TK71
>
> Dear Prafulla Wadaskar,
>
> > > -Original Message-
> >
Hi Tetsuyuki,
On Tue, Jun 26, 2012 at 3:52 AM, Wolfgang Denk wrote:
> Dear Tetsuyuki Kobayashi,
>
> In message <4fe9711a.2090...@kmckk.co.jp> you wrote:
>>
>> >> Are you sure the problems are not in the board specific code?
>> > OK. I will try the same thing on an in-tree board (maybe, panda boar
This patch add support for the configuration of an external switch from
the 88E6xxx series from Marvell trough an MDIO link using indirect
adressing. This can be used if we do not want to use an EEPROM for the
configuration.
This driver is not generic and was not tested on a lot of switches,
that'
On 06/25/2012 07:03 PM, Tetsuyuki Kobayashi wrote:
> Hello,
>
> (06/26/2012 12:10 AM), Stephen Warren wrote:
>> On 06/25/2012 06:40 AM, Tetsuyuki Kobayashi wrote:
>>> Interrupts and exceptions doesn't work in relocated code.
>>> It badly use IRQ_STACK_START_IN in rom area as interrupt stack.
>>> I
Am Dienstag, den 26.06.2012, 10:52 +0200 schrieb Michal Simek:
> 2012/6/25 Stephan Linz :
> > Am Montag, den 25.06.2012, 09:22 +0200 schrieb Wolfgang Denk:
> >> Dear Michal Simek,
> >>
> >> In message <4fe7f154.80...@monstr.eu> you wrote:
> >> > On 06/21/2012 09:42 PM, Stephan Linz wrote:
> >> > >
Am Dienstag, den 26.06.2012, 10:56 +0200 schrieb Michal Simek:
> 2012/6/25 Stephan Linz :
> > Am Montag, den 25.06.2012, 06:55 +0200 schrieb Michal Simek:
> >> On 06/21/2012 09:42 PM, Stephan Linz wrote:
> >> > Use XILINX_FLASH_START to set/unset FLASH and RAMENV.
> >> >
> >> > Error was:
> >> > b
Hi Nobuhiro Iwamatsu,
On Mon, Jun 25, 2012 at 11:18 PM, Nobuhiro Iwamatsu
wrote:
> Hi,
>
> Joe, could you pick-up ths patch to your network repository?
> This is bug fix to 201207.
Yes.
-Joe
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.de
On Tue, Jun 26, 2012 at 1:03 PM, Joe Hershberger
wrote:
> Hi Nobuhiro Iwamatsu,
>
> On Mon, Jun 25, 2012 at 11:18 PM, Nobuhiro Iwamatsu
> wrote:
>> Hi,
>>
>> Joe, could you pick-up ths patch to your network repository?
>> This is bug fix to 201207.
>
> Yes.
Applied, thanks.
-Joe
___
On 06/26/2012 10:30 AM, Joe Hershberger wrote:
> Hi Tetsuyuki,
>
> On Tue, Jun 26, 2012 at 3:52 AM, Wolfgang Denk wrote:
>> Dear Tetsuyuki Kobayashi,
>>
>> In message <4fe9711a.2090...@kmckk.co.jp> you wrote:
>>>
> Are you sure the problems are not in the board specific code?
OK. I will
Hi Scott,
On Tue, Jun 26, 2012 at 1:34 PM, Scott Wood wrote:
> On 06/26/2012 10:30 AM, Joe Hershberger wrote:
>> Hi Tetsuyuki,
>>
>> On Tue, Jun 26, 2012 at 3:52 AM, Wolfgang Denk wrote:
>>> Dear Tetsuyuki Kobayashi,
>>>
>>> In message <4fe9711a.2090...@kmckk.co.jp> you wrote:
>> Are yo
Also add the CPUCS register definition.
Signed-off-by: Marek Vasut
Cc: Prafulla Wadaskar
Cc: Wolfgang Denk
---
arch/arm/cpu/arm926ejs/kirkwood/dram.c|2 --
arch/arm/include/asm/arch-kirkwood/kirkwood.h |9 +
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a
Signed-off-by: Marek Vasut
Cc: Prafulla Wadaskar
Cc: Wolfgang Denk
---
board/karo/tk71/Makefile | 45 +++
board/karo/tk71/kwbimage.cfg | 174 ++
board/karo/tk71/tk71.c | 174 ++
boards.cfg
On 06/25/2012 08:33 PM, Marek Vasut wrote:
> Dear Scott Wood,
>
>> On 06/25/2012 06:37 PM, Marek Vasut wrote:
>>> Dear Scott Wood,
>>>
On 06/24/2012 07:17 PM, Marek Vasut wrote:
> but that involves a lot of copying and therefore degrades performance
> rapidly. Therefore disallow this
On 06/25/2012 08:16 PM, Marek Vasut wrote:
> Dear Scott Wood,
>> Note that in the case of "nand read.oob", depending on NAND page size
>> and platform, there's a good chance that you're imposing an alignment
>> restriction that is larger than the data being transferred even if the
>> user asks to r
Dear Scott Wood,
> On 06/25/2012 08:33 PM, Marek Vasut wrote:
> > Dear Scott Wood,
> >
> >> On 06/25/2012 06:37 PM, Marek Vasut wrote:
> >>> Dear Scott Wood,
> >>>
> On 06/24/2012 07:17 PM, Marek Vasut wrote:
> > but that involves a lot of copying and therefore degrades performance
> >>
On 06/22/2012 04:15 AM, Albert ARIBAUD wrote:
> Hi Lucas,
>
> On Tue, 05 Jun 2012 21:06:20 +0200, Lucas Stach wrote:
>> Hi Stephen,
>>
>> Am Dienstag, den 05.06.2012, 12:42 -0600 schrieb Stephen Warren:
>>> On 06/05/2012 11:47 AM, Lucas Stach wrote:
Recent toolchains default to using the har
Hi Tetsuyuki,
On Tue, 26 Jun 2012 11:30:16 +0900, Tetsuyuki Kobayashi
wrote:
> This patch depends on
> Nobuhiro Iwamatsu's arm: rmobile: Add supoprt for KMC KZM-A9-GT board
> Tetsuyuki Kobayashi's arm: rmobile: kzm9g: Modify sdram area
Seems like a series to me -- you should post it as such,
Dear Jim Lin,
In message <4b9c9637d5087840a465bdcb251780e9e2d6eda...@hkmail02.nvidia.com> you
wrote:
> Add support for command line "usb reset" or "usb start" to initialize
> , "usb stop" to stop multiple USB controllers at once.
> Other commands like "usb tree" also support multiple controllers.
Dear Prabhakar Lad,
In message <1340708826-26707-1-git-send-email-prabhakar@ti.com> you wrote:
> From: Alagu Sankar
>
> This is a Linux command line tool specific to TI's Davinci platforms, for
> flashing UBL (User Boot Loader), u-boot and u-boot Environment in the MMC/SD
> card. This MMC/SD
Increase malloc area for UBI to >= 512k -- foreseeing of UBIFS
set to 768k. To save memory in flash (CONFIG_SYS_MONITOR_LEN)
the UBIFS is disabled by default.
Signed-off-by: Stephan Linz
---
include/configs/microblaze-generic.h | 20 ++--
1 files changed, 18 insertions(+), 2 de
Use XILINX_FLASH_START to set/unset FLASH and RAMENV.
Error was:
board.c: In function 'board_init':
board.c:134: error: 'XILINX_FLASH_START' undeclared (first use in this function)
board.c:134: error: (Each undeclared identifier is reported only once
board.c:134: error: for each function it appear
CONFIG_SYS_FLASH_PROTECTION will defined twice. The second one
is outside the flash configuration context and we can remove
it safely.
Signed-off-by: Stephan Linz
---
include/configs/microblaze-generic.h |2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/include/configs/mi
Hi, Albert.
Thank you for your review.
2012/6/26 Albert ARIBAUD :
> Hi Nobuhiro,
>
> On Thu, 21 Jun 2012 15:23:39 +0900,
> Nobuhiro Iwamatsu wrote :
>
>> The KZM-A9-GT board has Renesas R-Mobile SH73A0, 512MB DDR2-SDRAM,
>> USB, Ethernet, and more.
>>
>> This patch supports the following functio
On 06/24/2012 11:21 AM, Vikram Narayanan wrote:
First off, it's great to see some patches for the chip. Thanks. Sorry
for being so nit-picky below; it's a tendency of mine...
It'd be nice to include a patch description here, so that something
shows up besides just the patch subject.
> diff --git
On 06/24/2012 11:22 AM, Vikram Narayanan wrote:
>
> Add the driver to the rpi_b's default config
It looks like there's a blank line before the patch description there.
Aside from that and the nit below,
Acked-by: Stephen Warren
> diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
The SH7757's ETHER can work using the SH7724's setting. So, the patch
modifies it.
Signed-off-by: Yoshihiro Shimoda
---
drivers/net/sh_eth.c |9 +
drivers/net/sh_eth.h | 14 ++
2 files changed, 3 insertions(+), 20 deletions(-)
diff --git a/drivers/net/sh_eth.c b/driver
At the moment, the driver supports the following CPUs:
- GETHER (Gigabit Ethernet) : SH7763, SH7734
- ETHER (Fast Ethernet): SH7724, SH7757
And the driver had the following "#if":
#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734)
#if !defined(CONFIG_CPU_SH7757) && !defined(CON
The previous code had many similar definitions in each CPU.
This patch borrows from the sh_eth driver of Linux kernel.
Signed-off-by: Yoshihiro Shimoda
---
drivers/net/sh_eth.c | 108 -
drivers/net/sh_eth.h | 331 +++---
2 files chan
SH7757 has 2 ETHERs and 2 GETHERs. This patch supports the SH7757's
GETHER. If CONFIG_SH_ETHER_USE_GETHER is defined using SH7757,
the driver handles the GETHER.
Signed-off-by: Yoshihiro Shimoda
---
drivers/net/sh_eth.h |9 +
1 files changed, 9 insertions(+), 0 deletions(-)
diff --g
Hi Joe, Thank you for responding.
(2012/06/27 0:30), Joe Hershberger wrote:
On Tue, Jun 26, 2012 at 3:52 AM, Wolfgang Denk wrote:
Dear Tetsuyuki Kobayashi,
In message<4fe9711a.2090...@kmckk.co.jp> you wrote:
Are you sure the problems are not in the board specific code?
OK. I will try th
Hi Tom,
On Mon, Jun 25, 2012 at 2:03 PM, Tom Warren wrote:
> Simon,
>
> > -Original Message-
> > From: Stephen Warren [mailto:swar...@wwwdotorg.org]
> > Sent: Wednesday, June 13, 2012 3:58 PM
> > To: Simon Glass
> > Cc: U-Boot Mailing List; Tom Warren
> > Subject: Re: [PATCH v2 0/19] teg
Hi Wolfgang,
On Wed, Jun 27, 2012 at 03:12:07, Wolfgang Denk wrote:
> Dear Prabhakar Lad,
>
> In message <1340708826-26707-1-git-send-email-prabhakar@ti.com> you wrote:
> > From: Alagu Sankar
> >
> > This is a Linux command line tool specific to TI's Davinci platforms, for
> > flashing UBL
Hello
thanks for respond.
This method not woking good :( Do you have enything sugestion to modify
rootfs files??
I find with vmlinux package gzip. In the gzip write files with rootfs. I
don't now what I must do to rebuilit this vmlinux :/ Please help
___
Dear Nobuhiro Iwamatsu,
In message
you wrote:
>
...
> >> --- /dev/null
> >> +++ b/board/kmc/kzm/lowlevel_init.S
...
> >> + and_write32 LIFEC_SEC_SRC, 0xFFE7
> >> +
> >> + and_write32 SRCR3, 0x7FFF
> >> + and_write32 SMSTPCR2,0xFFFB
> >> + and_write32
Dear Jim Lin,
sending the very same message eight (8!) times doesnot make it a bit
more convincing - on contrary.
In message <4b9c9637d5087840a465bdcb251780e9e2d6eda...@hkmail02.nvidia.com> you
wrote:
>
> > U-Boot is not multi-tasking, so you can always access only a single
> > USB device at a t
73 matches
Mail list logo
