On Thu, 21 Jun 2012 09:37:09 +0200 Christian Riesch <christian.rie...@omicron.at> wrote:
> Hi Mikhail, > > On Tue, Jun 12, 2012 at 11:15 PM, Mikhail Kshevetskiy > <mikhail.kshevets...@gmail.com> wrote: > > follow section 15.2.13.1 (Initializing Following Device Power Up or Reset) > > of > > OMAP-L138 DSP+ARM Processor Technical Reference Manual > > Thanks for fixing this! Just out of curiosity: Did you hit any problem > or were you just comparing the code with the reference manual? Hard to say, I faced with memory initialization problem (caused by hardware bug). Before I hit a real problem, I study omap documentation and find disagreements with the code. So i just fix it. > > > > Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevets...@gmail.com> > > --- > > arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 25 > > ++++++++++++++++------- > > arch/arm/include/asm/arch-davinci/hardware.h | 1 + > > 2 files changed, 19 insertions(+), 7 deletions(-) > > Acked-by: Christian Riesch <christian.rie...@omicron.at> > > For the calimain board > > Tested-by: Christian Riesch <christian.rie...@omicron.at> > > Regards, Christian _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
