> -----Original Message----- > From: Marek Vasut [mailto:ma...@denx.de] > Sent: 26 June 2012 18:18 > To: Prafulla Wadaskar > Cc: u-boot@lists.denx.de; Wolfgang Denk > Subject: Re: [PATCH 2/3] KW: Add kw_adjust_dram() weak function > > Dear Prafulla Wadaskar, > > > > -----Original Message----- > > > From: Marek Vasut [mailto:ma...@denx.de] > > > Sent: 26 June 2012 17:45 > > > To: u-boot@lists.denx.de > > > Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk > > > Subject: [PATCH 2/3] KW: Add kw_adjust_dram() weak function > > > > > > This function shall allow a board to adjust DRAM parameters in > case > > > there are multiple versions of the board with different DRAM > sizes. > > > > > > Signed-off-by: Marek Vasut <ma...@denx.de> > > > Cc: Prafulla Wadaskar <prafu...@marvell.com> > > > Cc: Wolfgang Denk <w...@denx.de> > > > --- > > > > > > arch/arm/cpu/arm926ejs/kirkwood/dram.c | 11 +++++++++++ > > > > Instead I would like to suggest to add function name as > > __kw_post_kwbconfig() > > what about using board_early_init_f() ?
I think that sound good. In that case you don't need to create any new function. Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
