Dear Bo Shen,
> Some Atmel SoC support USB EHCI, add the EHCI driver to support it.
>
> To enable the USB EHCI, add the following configuration options into
> board relative configuration file and remove USB OHCI options.
>
> #define CONFIG_USB_EHCI
> #define CONFIG_USB_EHCI_ATMEL
> #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
>
> Signed-off-by: Bo Shen <voice.s...@atmel.com>
> ---
>
> Change since v1:
> Add WATCHDOG_RESET to avoid infinite loop.
>
> ---
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-atmel.c | 68
> +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 69
> insertions(+)
> create mode 100644 drivers/usb/host/ehci-atmel.c
>
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 59c3e57..4547f37 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -36,6 +36,7 @@ COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o
> # echi
> COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o
> COBJS-$(CONFIG_USB_EHCI_ARMADA100) += ehci-armada100.o utmi-armada100.o
> +COBJS-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o
> ifdef CONFIG_MPC512X
> COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-mpc512x.o
> else
> diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
> new file mode 100644
> index 0000000..21037fe
> --- /dev/null
> +++ b/drivers/usb/host/ehci-atmel.c
> @@ -0,0 +1,68 @@
> +/*
> + * (C) Copyright 2012
> + * Atmel Semiconductor <www.atmel.com>
> + * Written-by: Bo Shen <voice.s...@atmel.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +
> +#include <common.h>
> +#include <watchdog.h>
> +#include <usb.h>
> +#include <asm/io.h>
> +#include <asm/arch/hardware.h>
> +#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/clk.h>
> +
> +#include "ehci.h"
> +#include "ehci-core.h"
> +
> +int ehci_hcd_init(void)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
> +
> + /* Enable UPLL */
Two spaces after UPLL, remove one.
> + writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
> + while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU)
> + WATCHDOG_RESET();
Ok, this is an endless loop, can you add timeout?
> +
> + /* Enable USB Host clock */
> + writel(1 << ATMEL_ID_UHPHS, &pmc->pcer);
> +
> + hccr = (struct ehci_hccr *)ATMEL_BASE_EHCI;
> + hcor = (struct ehci_hcor *)((uint32_t)hccr +
> + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> + return 0;
> +}
> +
> +int ehci_hcd_stop(void)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
> +
> + /* Disable USB Host Clock */
> + writel(1 << ATMEL_ID_UHPHS, &pmc->pcdr);
> +
> + /* Disable UPLL */
> + writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr);
& ~XXXXXXX is enough, remove the () .
> + while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU)
> + WATCHDOG_RESET();
Ditto here
> +
> + return 0;
> +}
Otherwise it's good :-) One more rework and I'll apply it to usb tree.
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
