On 20 June 2012 20:11, Rajeshwari Shinde <rajeshwar...@samsung.com> wrote:
> This patch sets UART3 and MMC channle 0 for Exynos5250 Rev 1.0
Please fix typo channle -> channel.
>
> Signed-off-by: Rajeshwari Shinde <rajeshwar...@samsung.com>
> ---
> Chnages in V2:
> - None
> board/samsung/smdk5250/smdk5250.c | 6 +++---
> include/configs/smdk5250.h | 2 +-
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/board/samsung/smdk5250/smdk5250.c
> b/board/samsung/smdk5250/smdk5250.c
> index 3b078da..b593325 100644
> --- a/board/samsung/smdk5250/smdk5250.c
> +++ b/board/samsung/smdk5250/smdk5250.c
> @@ -130,13 +130,13 @@ int board_mmc_init(bd_t *bis)
> {
> int err;
>
> - err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
> + err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
> if (err) {
> - debug("SDMMC2 not configured\n");
> + debug("SDMMC0 not configured\n");
> return err;
> }
>
> - err = s5p_mmc_init(2, 4);
> + err = s5p_mmc_init(0, 8);
> return err;
> }
> #endif
Thanks.
Minkyu Kang.
--
from. prom.
www.promsoft.net
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
