This patch adds support for networking in SPL on TI AM335x based
boards.
CC: Tom Rini <tr...@ti.com>
Signed-off-by: Ilya Yanok <ilya.ya...@cogentembedded.com>
---
board/ti/am335x/evm.c | 12 ++++++++++++
include/configs/am335x_evm.h | 5 ++++-
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/board/ti/am335x/evm.c b/board/ti/am335x/evm.c
index 16a52a0..5e09919 100644
--- a/board/ti/am335x/evm.c
+++ b/board/ti/am335x/evm.c
@@ -119,6 +119,18 @@ int board_init(void)
return 0;
}
+#ifdef CONFIG_SPL_BUILD
+int spl_board_init(void)
+{
+ enable_i2c0_pin_mux();
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ if (read_eeprom() < 0)
+ printf("Could not get board ID.\n");
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_DRIVER_TI_CPSW
static void cpsw_control(int enabled)
{
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 3f22f8a..c644968 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -127,8 +127,9 @@
/* Defines for SPL */
#define CONFIG_SPL
+#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (46 * 1024)
+#define CONFIG_SPL_MAX_SIZE (101 * 1024)
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
@@ -147,6 +148,8 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
/*
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
