Im having problems with a new USB2.0 PCI card.
(for use with RH8.0 or 9, Linux kernel 2.4.19 or 2.4.20)
This is a (relatively cheap) two port device, and the manual (such as it is,
one
page of specs, 5 pages of windows screen dumps), says that
it is an OHCI device.
Elsewhere it says that it is
I have a machine with one disk connected to the on-motherboard
disk controller, and a second data disk connected to a separate
controller on a plug-in PCI card.
Up thru 2.4.19 and 2.4.20 this worked just fine. I didnt do
ANYTHING and the controller for the PCI card 'was there' and I
could acce
I know that when Ive loaded a new RH distribution Ive been given
the option of converting my ext2 fs to ext3. I didnt do it
then, but Im ready now.
However, scanning /sbin, /usr/sbin, /bin, /usr/bin for something
with 'ext3' in its name didnt turn up anything appropriate...
So Whats the name of
I see this problem infrequently from RH8, and quite often from RH9.
I will print an article from Mozilla, only to find that the item
did not print in my postscript printer (HP4M+).
On RH8 the failure is always in the printer, on RH9 (with CUPS) it
is often the 'lpr' process that fails, as if its
For ShockWaveFlash, I see three different plugins listed.
HOW DO I GET RID OF TWO OF THEM
Ive been down every rathole I can find in Mozilla/Netscape
and I dont see how to do it.
Ive looked for mime.types mime-types mailcap files and dont
see the equivalence.
Its 'gota be there someplace,-
OK, after the long thread on JAVA, I finally went out and grabbed
it.
I think.
So what is the difference between JRE and SDK when you get to the
SUN download page???
(I pulled JRE, did I get the right thing?)
--
Reg.Clemens
Someplace in the Install process, it looks like fdisk (or something
similar) writes 'Labels' to the partitions on the disk, and then
uses these labels in /etc/fstab.
Other than /etc/fstab, I see references to these labels during the
fsck during the boot sequence.
So the question.
How can I SEE a
In Netscape I could go down Edit->Preferences->apperance->Fonts
and have some control over the font sizes on my screen.
With Mozilla I see no such popup, and the fonts being used are
TOO SMALL to read.
Anyone know how to fix this?
--
Reg.Clemens
I can understand the reasons for some of the things that
RedHat deleted from RedHat8.0, but why did they delete
METAMAIL when several (all?) mail readers depend on it???
--
Reg.Clemens
[EMAIL PROTECTED]
--
redhat
OK, Im confused.
As far as I can tell, all of the 'diagnostics' I can run LIE about where
a USB memory device is going to be found on the SCSI bus, or at best are
inconsistant.
This appears to be (mainly) a problem when you have multiple USB devices
that get plugged and unplugged (I have a 256Mb
Help
I'm having problems printing to a HP Printer.
I have backed up to the point where I see it cat'ing the Postscript to the
printer using the line
cat file > /dev/tcp/129.238.62.130/9100
[ The IP address and the port are $ substiutions, and /dev/tcp is a symbolic
link to /dev/etc/t
I have never had problems mounting Windows File Systems
before (with -t vfat), but I have one here on a USB disk that is
either damaged (unlikely) or something Ive never seen before.
Looking at the list from /sbin/fdisk I see:
6 FAT16
4 FAT16 (<32M)
e FAT16 (LBA)
b Win95 FAT32
Some time ago I had LOGWATCH working just fine (this is RH7.3).
Then I updated some things (perl, tk/tcl, ...) and I havent
heard from logwatch since.
Tonight I played with it a bit, putting printf statements in the
logwatch perl script, and it doesnt die, it runs thru from top
to bottom, but no
[ Sorry for this getting posted twice, but it got out without
a subject line the first time around ]
Some time ago I had LOGWATCH working just fine (this is RH7.3).
Then I updated some things (perl, tk/tcl, ...) and I havent
heard from logwatch since.
Tonight I played with it a bit, putting pri
OK, I SURE Ive done this before, but I cant quite get the
syntax right on this shell script.
What I WANT to do is read lines from a list of data, and
pass the lines (individually) to another script.
What Im trying (and I get syntax complaints) is
test.sh < test.data
where test.sh is
I just found that I had 3 different versions of libssl
on my machine in three different libraries.
I have zapped the ones in /lib and /usr/lib, and updated
the one in /usr/local/lib to the current release.
Now when I run up2date, it wants to install a copy of
the (older) library in /usr/lib. Si
This may have been answered previously, but my archive doesnt go
back far enough to find it.
When I do a dvips
Instead of being routed to the printer, I get the error message:
[EMAIL PROTECTED] Unisys]$ dvips test.dvi
This is dvips(k) 5.86 Copyright 1999 Radical Eye Software (www.radicaleye.com
I dont know about the RPM, but if you COMPILE sendmail, read on.
Im not sure WHEN this change occurred, but somewhere between
8.12.1 and 8.12.8 (the new bug fix level), BUT they have
changed the default location of the directory where you have
to put (links to) the files that smrsh will run.
I j
>
> Are you refering to compiling the SRPM, or from Sendmail.org's source tarball?
>
The Source from www.sendmail.org
--
Reg.Clemens
[EMAIL PROTECTED]
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROT
Reading the RHN manual, I keep getting the feeling that the
reason that rhnsd is running is so that up2date (or something
similar) can update my machine without my intervention (otherwise
what is its purpose???). Theu surely dont need it just to send
me e-mail telling me that updates are available
This will probably start a firestorm of additional posting, for
which I am sorry, but, I seem to remember that at this time
last year I was downloading RH9 CD's.
With RedHats 'new business model', is there any indication that
there ever will be a RH10?
If so any indication of when I might appear?
> Besides, the rest of the market seems to disagree with you:
>
> Sun Microsystems (SUNW): Price $4.10, 1-year return 42.36%
>
>--- Data from Bloomberg.com, 9/20/03, 2155GMT.
>
Yes and in 2000 the stock was over $60, so what are you trying to tell me?
--
Interesting, when I try using the suggested:
|IFS=' ' && exec /usr/bin/procmail || exit 75 #1015
I get the error message (in maillog)
attempt to use "procmail.||.exit.75.#1015" (stat failed)
removing the #1015, I get the error
attempt to use "procmail.||.exit.75" (stat failed)
The kghostview in kdegraphics-3.1-5 is broken.
The one in kdegraphics-3.1-4 seemes to work just fine.
The symptoms are that you CAN NOT choose a page to display
from the page list at the left, and the hour-glass/cursor
rotates once every 2sec or so.
Anyone else notice this?
Any fix?
(yes I can
I have just updated to today's release of up2date, and find
that it (along with the previous version) DOES NOT WORK since
I updated to gnupg-1.2.0.
I get a popup saying that gpg cant be found even though it
is in root's path.
Any workaround to this problem?
When will up2date REALLY be fixed?
--
Not a good start.
The response I got to this message refers to the up2date
THAT I JUST INSTALLED, and it does NOT MENTION the problem
that I mentioned. The new up2date-2.8.39-1.7.2.i386.rpm
does NOT WORK with gnupg-1.2.0, it doesnt 'find' it, even
though its in roots PATH.
--
My IPTABLES rules include a rule for what IP addresses I
allow FTP connectons from,
## Allowed FTP clients listed here:
$IPTABLES -A ALLOW_PORTS_I_EXT -p tcp -s www.xxx.yyy.zzz --dport 21 ACCEPT
and then rules of the sort
## Accept Established, Related.
$IPTABLES -A INPUT -m stat
dcc/dccproc are started by RH9, but they seem to NOT
have some startup file that is needed. As such all
I see is error messages about the shared memory file
/var/dcc/map
not existing.
DOES ANYONE KNOW what is needed to get this thing
running correctly?
Anything that will reduce the SPAM I s
I *thought* the reason I was seeing funny characters in MAN output
was due to the fact that I had set LANG=en in my environemnt,
however,
Even *with* LANG=en_US.UTF-8 I see the same funny character pairs
(which I assume are UTF-8 in the source).
Why are they NOT iterpreted correctly?
What do I n
Sorry for the late response, but Ive been out of town.
Im using a Connect Gear MG4, 4port switch, which comes with cables.
I had a problem with Win98 only wanting to run an low resolution,
but everything else (win2000, Linux, FreeBSD) all work fine.
--
Re
OK, there are two things that I dont understand.
I dont understand how the same mc file works on 8.0 and not on 9.0
and
you SAY that you are relaying thru smtpauth.earthlink.net, but I dont
see that line in your configuration file.
---
What you are seeing is the more-and-more common blocking of
Can I mount a FreeBSD disk partition with Mount?
It seems I would want to say -t ufs -o,ufstype=44bsd
but how would I specify the 'sub-partition' ??
The partition is /dev/hda2, but I need to say something
like /dev/hda2a, but this of course does not exist in /dev
Is seems that if they provide t
I sent this message to the list about a week ago, and havent received
any respnses, Im trying again...
Can I mount a FreeBSD disk partition with Mount?
It seems I would want to say -t ufs -o,ufstype=44bsd
but how would I specify the 'sub-partition' ??
The partition is /dev/hda2, but I need to s
OK, another RH8.0 gotcha...
If you do a
man -t | lpr
man uses groff (I assume) to format the page and generate postscript
to pass to the printer.
But SOMEWHERE groff is set to default to A4 paper (rather than letter).
(Do a man page as above and you will see that the top line of th
Thanks for the reply.
I had done a bit more digging, and between that and your comment I
have a solution to the problem.
IT WOULD SURE BE NICE IF THEY DOCUMENTED THIS SOMEPLACE...
RH7.3 had groff 1.17.2, and in the file
/usr/share/groff/1.17.2/font/devps/DESC
the variable paperlenght is
DVIPS works fine under RH7.3 and previous, but under
RH8.0 all I get when I try to print is:
dvips mytest.dvi
This is dvips(k) 5.86 Copyright 1999 Radical Eye Software
(www.radicaleye.com)
' TeX output 2002.12.02:1519' -> |ipr
dvips: ! couldn't open output pipe
I have changed the
On trying to run UP2DATE this morning to take care of the KDE
problem, I got the following message from UP2DATE
Test install failed becuse of package conflicts.
file /usr/include/kde/kbabel/catalog.h from install of
kdesdk-kbabble-3.0.3-0.7 conflicts with file
Up till a few weeks ago, LOGWATCH produced page+ of output
every day (most of it was complaints from sendmail about SPAM,
but it also listed my connections from 'outside' via SSH).
And then it stopped.
My assumption is/was that this is because I had updated perl/
tk/tcl, and (most likely the new
compile scsi support into my
kernel (I have scsi disks), but this can't be the problem if you can boot
the kernel normally.
clemens
-
Clemens Adler e-mail: [EMAIL PROT
surprised, that a regular 200MMX
should be 1.5 times faster than an 266 PII, both running the same kernel
(-version)),
greetings Clemens
-----
Clemens Adler e-mail: [EMAIL
h a fierce
thing with rpm's, so I just got the standard linux edition from netscape
(a .tgz) installed it and it works fine. I don't have the strong
encryption version however( since I live in Europe and am not allowed to
be too secret or whatever)
Clemens
--
PLEASE read
as I
just wrote in reply to someonelse, the module sources come with the kernel
sources.
keep compiling ;),
Clemens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To un
ch actuall do
mean totally different things for example one RAID level is splitting up
data and writing it to two different disks which is much the opposite what
you refer to ( if one disk breaks all data is lost but you have twice the
transfer rate).
best wishes ;)
Clemens
--
PLEASE read the Red H
reinstalled the whole system configured the SVGA driver again and since
then it works without problems. Well I have no idea what's happening, and
I don't really want to encourage you to wipe out your system and reinstall
i
or iso9660
support)
either rm /lib/modules/2.0.34/*
or
mv /lib/modules/2.0.34 /lib/modules/2.0.34-old
have fun,
Clemens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
xsession or .Xclient
files from your home dir or modify them in the same way.
If you still have problems ask again,
Clemens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
T
kernel
2.0.32 2.0.33 and also in 2.0.34 both compiled into the kernel and as
module.
good luck,
Clemens
-
Clemens Adler e-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED
rk if you just delete any ipx and appletalk entry.
And don't forget to back up that file :)
Clemens
-----
Clemens Adler e-mail: [EMAIL PROTECTED]
[EMAIL
me)?
>
> Can anyone help a !mime type? TIA.
>
Here is my .mime.types file you could just cp it to you home dir
or in netscape: edit preferences Navigator Applications new, then put into
Despription: Redhat Packetmanager file ( or however you want to call it)
under MIMEType: ap
"default"
XkbCompat "default"
XkbSymbols "us(pc101)"
XkbGeometry "pc"
XkbRules"xfree86"
XkbModel"pc101"
XkbLayout "us"
EndSection
you would have to alter the "us"
On Mon, 8 Jun 1998, Doug Smoak wrote:
> Clemens wrote:
>
> > Doug,
> > I've upgraded a stock 5.0 System with the 2.0.34 kernel-headers and
> > kernel-sources and am VERY Happy with it however I like to recompile my
>
> "Like"?? You l
ful
thanks,
Clemens
-----
Clemens Adler e-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED]
Institut fuer Kernphysik
Universitaet Frankfurt office phone: 069
of the export should work.
good luck,
Clemens
-----
Clemens Adler e-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED]
Institut fuer Kernphysik
Universitaet Frankfurt
e the kernel I
guess lilo got a bit corrupted.
Clemens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
the thing you described
good luck,
Clemens
On Mon, 8 Jun 1998, rarab wrote:
> Can someone tell me specifically where to find information on accessing my
> own machine using telnet from a remote machine. I telneted into my sons
> school account and from there telneted back into my own ma
.:
.school.ofyour.son and then, if you have more questions look at the
hosts.allow man page or ask again
good luck
Clemens
> Hi Chris:
> I am rather green to this business and do not know what I should
> be looking for.
> I have in /etc/hosts.allow
Just copy .xinitrc and .fvwmwhatever (I don't like fvwm) from one of your
users to your home directory,
Clemens
On Mon, 8 Jun 1998 [EMAIL PROTECTED] wrote:
> I am running Redhat 5.0 and not too long ago, I did...something (I do not
> know exactly what) such that now the default win
mqueue.
>
> How can I move /var/* to /dev/hda7 ?
>
You could make a diectory /home/var/
cp -R /var/* /home/var/
ln -sf /home/var /var
this should do the trick (as long as there are no progs or files with
relative pathnames in var but try it out), even if its not very elegant
Clemens
;t read your
mail concentrated? ;)
But I have another unsolved (unsolved??) do you maybe know how to set up a
NIS Password system ( what to do on the server , and on the hosts) ??
I would be GRATEFUL if sombody would explain it roughly (files etc.)
best wishes,
Clemens
--
PLEASE read th
What is configure supposed to do??
clemens
> Can anyone help me figure out how to run 'configure'
> It always tells me command not found, so if it is not installed by default
> where can I find the program?
> Thanks
>
>
> --
> PLEASE read the Red Hat FAQ,
Oh I'm sorry Matt, :)
By the way forget about the NIS, in the meantime I managed already how to
set it up :)
clemens
On Tue, 9 Jun 1998, Matt Housh wrote:
>
> I did read it, but apparently no one else did :)
>
> ---
x27;t know where to get it ask again,
greetings Clemens
On Tue, 9 Jun 1998, Paul Fontenot wrote:
> I know this has been asked, and answered before, but woulod someone please pass the
>knowledge neccesary to get Linux booting from the NT Boot Loader.
>
> Drive #1 = NT 4.0
> Driv
Hi there has anyone an idea where would be the best place (in terms of
files) to set my nis domain on startup, i.e. where I could put the command
domainname NISDOMAIN, so that ypbind which is also executed on startup
will find a domainname.
Thank,
Clemens
).
for your card there are two servers available ( XF86_SVGA and XF86_S3V)
the XF86_S3V didn't work well for me, but you could try it out (it's
faster)
Then you're also asked about the video modes and you can adjust the
default mode, etc. just try it out.
good luck,
Clemens
On Tue, 9 Ju
ries where from
1993!! I asked the guys at XIG about it and they just told me:they're not
quite as old and they use them because they are the most stable. well nice
but somehow not really apropriate on a fast evolving system like Linux.
Besides was not the case that I got AcceleratedX and inst
in
a situation where my filesystem was totally fucked up I couldn't boot
anything anymore, it was in the night already and I was desperate.
greetings,
Clemens
-----
Clemens Adler e-ma
permitted) but everybody (everything) can write to tmp's whatever
they want.
regards,
Clemens
On Wed, 10 Jun 1998, Shawn McMahon wrote:
>
> I'm curious; what is it that makes /home somehow more secure if it
happens
> to point to a different partition instead of just a differe
you have
a realistic idea of how large different filesystems should be for you, I
think one should distribute filesystems on different partitions.
But maybe this item is getting too philosophic.
greetings,
Clemens
On Wed, 10 Jun 1998, Shawn McMahon wrote:
> But again, we're talking about recomm
l time
set e.g. UTC=true and link /etc/localtime to /usr/share/zoneinfo/UTC (or
of course do the the same with GMT)
greetings,
Clemens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
stuff and then reboot!!!!
clemens
-----
Clemens Adler e-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED]
Institut fuer Kernphysik
Universitaet Frankfurt office phone
For example at :
ftp://ftp.gwdg.de/linux/install/redhat/redhat-5.0/i386/RedHat/RPMS/
and probably at other mirror sites.
cheers,
CLemens
On Thu, 11 Jun 1998, Jon A. Christopher wrote:
> Hello,
>
> I have a major problem with X after I upgraded to 5.1, so I decided to
> downgr
(like jagged blue lines) and won't respond to ctrl-alt-bksp your
system got killed, but you could check
this out by telnetting to your machine from another box if available, but
usually you will only get 'trying 123.123.123.123' and then there is no
way around rebooting.
Clemens
the r
at the /etc/X11/xdm or /etc/X11/xinit files
startx looks at /etc/X11/xinit/xinitrc
xdm looks at /etc/X11/xdm-config
in those two files other files are defined which will be read. the
procedure is more or less user defined ( or rather distribution defined)
so I doubt you'll find a referenc
bution) . What you need is 2.0.34 which can be obtained from
the redhat 5.1 area on ftp-servers.
Clemens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL P
t;
EndSubSection
SubSection "Display"
Depth16
Modes"1280x1024" "1152x864" "1024x768"
EndSubSection
SubSection "Display"
Depth24
Modes"1280x1024" "1152x864" "
/AnotherLevel directory).
> How can I add ApplixWare to my X Window manager easily?
>
With fvwm2 it's a pain, with KDE however :)
clemens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mai
even though killall should take care
of any leftovers ( as long as they created a lockfile in
/var/lock/subsytem)
cheers,
Clemens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
( you
should have portmap-4.0). then look
at your /etc/hosts.allow and hosts.deny files, usually the host that runs
portmap is always considered authorized to connect to portmap so check if
you somewhere deny acess to your localhost. This is unlikely but strange
things happen.
greetings,
Clemens
-
y adding a line
to your lilo.conf ( and then run lilo) which says:
append= "ether=9,0xff80,eth0"
if your card has irq 9 and io base-adress 0xff80
greetings,
Clemens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-E
Hey Steve,
This has been discussed like 5
times (at least) during the last two weeks.
the modules are included in the kernel respectivly in the kernel sources
rpm just install kernel headers and kernel source and compile.
clemens
te module net-pf-4
>modprobe: Unable to locate module net-pf-5
>
That is no problem, modprobe tries to load some default configuration. You
can suppress the error message by adding the folloing lines to
/etc/conf.modules
alias net-pf-4 off
alias net-pf-5 off
greetings,
Clemens
--
PLEASE re
Hi Steve,
This is not a problem of the kernel sources, you need as86 which is
included in the bin86 rpm.
greetings,
Clemens
On Mon, 15 Jun 1998, Steve Ki-Won Lee wrote:
> Greetings!
>
> I just downloaded and installed the rpm packages of
> kernel-headers-2.0.34-0.6 & kernel-s
Well that is because it cost's 99 bucks ;)
-
Clemens Adler e-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED]
Institut fuer Kernphysik
Universitaet Fran
Well, upgrading the kernel is no pain, just get an kernel rpm. I belive
that's all.
about the rest of your question upgrading the system I'd be interested
also.
cheers,
Clemens
-----
Clemens Adler
stem' via nfs and read and
write fro to it. There are other options you can specify.
)
Clemens
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscri
the whole procedure
everytime you compile a new kernel ( which shouldn't actually be too
often).
good luck,
Clemens
---------
Clemens Adler e-mail: [EMAIL PROTECTED]
[
rs ( by the way, usercfg won't start
either when you edited the passwd file by hand, but I believe you would
get other messages than you did),
or use useradd for makeing new users
hope that helps,
Clemens
-----
Clemens Adl
Ok, sorry
Clemens
-
Clemens Adler e-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED]
Institut fuer Kernphysik
Universitaet Frankfurt office phone
en
with the 2.0.34 kernel, but I 'm not really sure wether that's really
conected to the NE2000 driver.
Good luck,
Clemens
On Sun, 31 May 1998, Perez, Victor wrote:
> I've hear about problem using PCI network cards with Linux. I want to know
> if I'm going to have problems
55 head / 63 Sector translation which has been
> enabled on this adapter. Data could be corrupted!
>
> What can I do here...?
Sorry no Idea
good luck,
Clemens
>
> Any suggestions are welcome
>
> TIA
>
> Jacek
>
>
> --
> PLEASE read the R
tch :Power off on shutdown
(somthing like this, you'll know which one I mean when you see it).
That's all.
Clemens
On Sun, 31 May 1998, Jacek Andreas Matulla wrote:
> Hi all,
>
> well is it possible that on shutdown the PC will shot off as in Win9x...?
>
> Do I need some
around a bit
and what we finally did ( if I remember right, this guy mixed Capirihias
all the time) boot linux start fdisk and just remove every Linux
Partition. I was surprised this worked but it did somehow.
good luck,
Clemens
>
> --
> PLEASE read the Red Hat FAQ, Tips, Errata and
have to install the Suse XFree or would it be enough to just use their
Permedia-Xserver?
TIA,
Clemens
-
Clemens Adler e-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED
anguage support.
you have to enable this, the it's there.
Clemens
>
> ---
> Richard Lindner [EMAIL PROTECTED] Intrepid Adventurer
> Oh! - What a Long Strange Trip it's been Ph:+61 (0)411 741 560
>
>
> --
> PLEASE read the Red Hat F
ot;: mode clock = 157.500
(**) GLINT: Mode "1024x768": mode clock = 115.500
(**) GLINT: Mode "800x600": mode clock = 69.650
[adler@cowpc->/d11/tmp] 45)
and that where it kills itself. I've been juggling around with links and
altering XF86Config already, but always t
x27;m not shure to what actually).
Just move /lib/modules/2.0.32 to /lib/modules/2.0.32-old,
go to yout linux src directory and just run make modules_install again
this should solve the problem.
Clemens
-
Clemens
There is a file , /usr/src/linux/arch/i386/defconfig which is loaded as
default in case there is no .config file in your ..src/linux directory,
but probably you should go through the cofiguration and read the help, and
decide what you need.
have fun,
Clemens
e which is aliased to
net-pf-4 .
good luck,
Clemens
-----
Clemens Adler e-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED]
Institut fuer Kernphysik
Universitaet
or so to go through the make
(menue)config with reading the available tips. And the resulting kernel
shouldn't be less stable as the one that redhat supplied.
Sorry, if this is not what you wanted to hear :-)
Clemens
------
99 matches
Mail list logo
