One Stop Custom Shop
Colorado Springs, CO
(719) 495-2740
Also, I'll check with a friend that may have two for sale.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry
How about the possibility of the batteries being overcharged, thus a ruined
battery bank?
I believe magnum recommends a diversion load controller with a dump load and
using the frequency shift as a back up.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372
board but I'm trying to use the
inverter features first.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
> On Nov 7, 2014, at 1:45 PM, "William Miller" wrote:
>
> Friend:
>
Use the Midnite SOB series.
They have a 4 pole
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
> On Oct 7, 2014, at 12:41 PM, William Mille
How about the Midnite Solar four pole disconnect?
Can't remember the model number but recently installed one on a two string TL
input circuit. They are made for disconnecting both positive and negative.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372
Pretty sure Midnite sent out some of the classics with a Magnum BTS. Due to
part shortage.?
Installed one in June this year.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone.
I am in need of a timer for an SQF Grundfos pump, PV direct.
Would it be considered a non-inductive load?
I was thinking to install the timer on the PV input side.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
Static level is 200 feet
Well produces ~1 gallon per minute. 4 inch casing.
200 gallons per day requirement
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for typo
Hi all,
Any recommendations for a low flow, high lift pump, PV direct pump.
1 GPM @ 600 ft of head. Maybe a conventional pump on a timer?
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy&#
Have one with dual Xantrex XWs and a IG plus 10.0. Working good
Jeremy Rodriguez
All Solar
CO USA
- Original Message -
From: Drake
To: RE-wrenches
Sent: Thursday, April 17, 2014 9:15 AM
Subject: Re: [RE-wrenches] AC coupling with Fronius
We did one and it seems to work f
Geocell is great stuff.
I installed tubular skylights for years, and that's what the manufacturer
supplied. I believe it was the 3300 pn which is polyurethane however and states
it is for roofing!
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 o
I have found it through my local Rexel. 10/2 flat tray cable, submersible rated
as well.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
> O
ast 6 months with no problems. I also
believe the clipper would take care of it, just have no experience with it yet.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenche
Can anyone comment on the S-5! CorruBracket?
Any other recommendations or comments appreciated.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for typos and shor
Colorado Wrenches,
Anyone know of a good Kohler
Standby generator service tech.?
Also what would your estimated life span be for a 12RES in hours.
Is 4000 hours well past it. I think so.
Contact me off list
Jeremy Rodriguez
All Solar
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
Hello
Is there any reason to adjust a charge controllers bulk or other settings if
there will be very minimal loads on the battery bank for 5-6 months ? Just had
a client ask me that about his new MN classic.
Thank you
Jeremy Rodriguez
All Solar
Sent by Jeremy's iPhone. Sorry for typos a
Matt
Sounds like you have checked everything. How about the wiring coming from the
brush holder? Make sure none of them have been chaffed near the pivot. Of
course the brushes might show some arcing too if there is an intermittent
short. If you need an upper casting, complete with stator and a
Wrenches
I recently visited a site where their backup gen has GFCI outlets used for
input to the FX inverter.
They finally tried to charge the batteries, and it trips the GFCI.
As a test I replaced it with a standard outlet and it works fine.
I have never used a gen with GFCIs, In fact most a
If anyone has a single ESA210 evergreen module, please contact me off list
Thanks,
Jeremy
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.net
Email allso
think the tower would support a Bergey XL.1 which would be my
choice given the Whisper's ordeal.
Regards,
Jeremy
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.
Anyone know of a source for Filon, our supplier is out of business. Trying to
re-glaze a panel.
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.net
Email allso
Hello,
Does anyone know Kyocera's stand on the old KC120 modules. I recently visited a
site with one shattered and others that may have issues.
Jeremy Rodriguez
All Solar,
Penrose CO___
List sponsored by Home Power magazine
List Address: RE-wrenches@l
Thermal Wrenches,
Has anyone ever heated an oil tank with thermal collectors?
Specifically, I wonder if the oil itself can be pumped through the collectors (
drainback or otherwise )
This is for an asphalt batch plant.
Thanks in advance!
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M
I found out that the appliance will work fine from an extension cord with a
portable generator.
The appliance will not even work however when the backup gen is running and
transfering through the inverters.
Outback T.S. suggested to check the Neutral to ground bond so that is the next
step. Also
If anyone has a Whisper 100 (H40) controller, a good EZ WIRE would do, please
contact me off list
Jeremy
All solar
Sent via BlackBerry. Sorry for typos and shorthand!
___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches
Wrenches,
Here is my situation: GT string inverter - 3 strings of mods, 10KW DC. We need
to reduce the PV when the grid is down as to not overload the AC coupled
inverters.
Is there a good way to limit PV input like shunt off some power or short part
of the array? (part)
I was first thinking
output of the inverter.
P.S. Dave, I know you are looking into this when you are done traveling!
Thanks in advance
Jeremy
All Solar, Inc.
CO, USA___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email
Wrenches,
I had a prospect send me PV Watts data for his future off grid home. Of course
we use PV Watts for GT systems all the time, but I have yet to use it for Off
Grid system design. We use an old Dankoff Solar tool that has worked for
years
Any thoughts on using PV Watts as a basis for
There is an exception in NEC2011 regarding the point of connection. This may
not apply, but you could avoid the supply side. 4500W / 240V = 18.75 x 1.25 =
23.4A, well under the 120% rule. reference 705.12(D)(2)
Jeremy
All Solar
CO,USA
- Original Message -
From: Garrison Riegel
T
vid Lauzon
President
Northern Arizona Wind and Sun
Phone-928-526-8017 / 800-383-0195
Fax-928-527-0729
Website-http://www.solar-electric.com
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of All Solar, Inc.
Se
since it's a panel mount breaker.
Regards,
Jeremy
All Solar, Inc.
___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wr
Aeromax's Lakota it is!
Sent via BlackBerry. Sorry for typos and shorthand!
-Original Message-
From: "Chris Worcester"
Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Sun, 24 Feb 2013
09:52:27
To: ;
'RE-wrenches'
Reply-To: RE-wrenches
Subject: Re: [RE-wrenches] Fw: Anyone re
Pretty sure its 2.5" I thought they had a Whisper originally.
Pete Austin, If you're out there, this is Scott's
Sent via BlackBerry. Sorry for typos and shorthand!
-Original Message-
From: "Chris Worcester"
Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Sun, 24 Feb 2013
09:52:2
3 Feb 2013 21:14:38
To: ; 'RE-wrenches'
Subject: RE: [RE-wrenches] Fw: Anyone recognize this turbine?
Windseeker 500 rebladed
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jeremy
Rodriguez- All Solar Inc.
Sent: Saturda
Has anyone been in touch with Southwest Windpower lately? We are trying to
order a replacement part. No Luck. We have left numerous messages.
Jeremy
All Solar
Sent via BlackBerry. Sorry for typos and shorthand!
___
List sponsored by Home Power magazine
Check out Gillette Generators
Made in Indiana
Jeremy
All Solar
Sent via BlackBerry. Sorry for typos and shorthand!
-Original Message-
From: toddc...@finestplanet.com
Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Tue, 29 Jan 2013
19:39:43
To: RE-wrenches
Reply-To: RE-wrenches
Su
Suntech 295's... Biggin!
Thats about it!
We did get some 72 cell mods from Oasis Montana (dealer)
We are in the same boat. 14 years of off grid installs!
Jeremy
All Solar
- Original Message -
From: Allan Sindelar
To: RE-wrenches
Sent: Thursday, January 24, 2013 12:35 PM
Sub
Hi
I have an inspector requesting info on Surrette 5000 series batteries. I have
told him they are dual container and that there is not a listed enclosure for
them. In fact I see no mention in the code book about requirement for a listed
enclosure, only that the tray must be able to resist acid.
Hello
Does anyone know if the One Stop Cop shop in Colorado Springs still repairs
inverters? I just spoke with a client who may need an AC board for an SW.
Maybe best to just upgrade him to an OB! The SW will start the genny
automatically, but he must stop it manually. (AC board has the relay
William,
They are using the 2011 code, so we should be good.
705.12D2 exception is a little confusing at first, but I got it.
Jeremy
Sent via BlackBerry. Sorry for typos and shorthand!
___
List sponsored by Home Power magazine
List Address: RE-wrenche
I'm concerned that the inspector will not allow a 60A back fed breaker in the
200A main panel as it exceeds the 120% rule
Jeremy
Sent via BlackBerry. Sorry for typos and shorthand!
___
List sponsored by Home Power magazine
List Address: RE-wrenches@list
(*Please note of our new address.)
T: 510.498.3201 ext 747
M: 530.277.4894
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jeremy
Rodriguez- All Solar Inc.
Sent: Sunday, December 30, 2012 10:35 AM
To: re-wr
Wrenches,
Since the XW6048 calls for a 60A breaker to feed the inverter input and we are
connecting back to the load side of a 200A panel is this correct.
6000รท240=25X1.25=31.25A. We cannot exceed a 30A breaker? Help me understand
this.
Jeremy
All Solar
Sent via BlackBerry. Sorry for typos and
We have installed 3 Systreams in off grid settings with the Whisper 500 DC dump
load (from SWWP) with good results. Used 2 Morningstar TS 60's, one set a
little lower, as a secondary diversion (per code) in case the other fails. I
have an SW Plus set up this way at our office, and the others use
With news that Southwest Windpower has layed off some of its staff and that
they are discontinuing the Whisper line I wonder who will pick up the slack, if
anyone!
Perhaps Bergey will make their XL.1 in 48V.
What turbine brands can the wrenches recommend?
Sorry if this does not pertain to this
We are in need of approx 2kw of 160-170w modules, 72 cell.
Please contact me off list if you can help
Jeremy Rodriguez
allso...@scswifi.net
Sent via BlackBerry. Sorry for typos and shorthand!
___
List sponsored by Home Power magazine
List Address: RE-wr
Just returned from Phoenix where I saw an article in one local paper that
Suntech is cutting production down to 1 MW and laying off 50% of the work force
at the Goodyear AZ facility. Too many tariff fees they claim... Another one
bits the dust
Jeremy
All Solar
Colorado
Sent via BlackBerry. S
Anyone have a good product besides plywood for a collector cover? 4x8 ft.
Thx!
Jeremy Rodriguez
All Solar
Colorado, USA
Sent via BlackBerry. Sorry for typos and shorthand!
___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-
Anyone know of a reliable 48vdc timer to control a well pump? Pump will be a
Grundfos SQ 240VAC.
The idea is to limit the run time to prevent over discharge of the battery
bank. The only charging source for now will be wind power, and the wind gen
requires AC voltage to connect. I'm concerned
--Original Message--
To: re-wrenches@lists.re-wrenches.org
Subject: BP Modules
Sent: Oct 2, 2012 3:54 PM
Anyone know who is providing warranty support for BP?
Same old problem - shattered glass from overheated J box area
Jeremy Rodriguez
Sent via BlackBerry. Sorry for typos and shorthand
Wrenches,
If anyone has set up a whole house backup using Xantrex XW or others, with AC
coupling, please contact me off list. I have a one line I would like to share
and get some input on.
Thanks,
Jeremy Rodriguez
All Solar
allso...@scswifi.net
___
Lis
Hello,
Anyone have a source for a Xantrex PS series inverter control panel cable?
It's the 25 pin cable. Looks like an old printer cable. Also any luck with
splicing (repairing) them as it's been cut.
Contact me off list if u have one.
allso...@scswifi.net
Jeremy R
All Solar
Sent via BlackBerry
I've wondered about this as well with our unpressurized drainback systems. My
HVAC supplier had told me that once you heat the water above 165 or so, that
you basically have distilled it. Not sure. I thought you would need to boil it.
Though we have had no issues with corrosion as we have had s
Anyone know if AAA (semco) is still operating? Tried to order an Air Collector
system and all the numbers are down or disconnected
Jeremy Rodriguez
All Solar
Sent via BlackBerry. Sorry for typos and shorthand!
___
List sponsored by Home Power magazine
L
that Tech Note? Marc?
Other options?
Thanks in advance
Jeremy
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.net
Email allso...@live.com___
List
Hello,
I just spoke with a Multi Contact rep that tells me I cannot purchase the
internal connector pins seperately (MC4 #10-12awg) Bummer!
Anyone out there by chance have extras?
Contact me off list if so.
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
Ilsco ULT-4
Jeremy
All Solar
Colorado
Sent via BlackBerry. Sorry for typos and shorthand!
-Original Message-
From: Jason Szumlanski
Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Thu, 2 Aug 2012 09:39:26
To: RE-wrenches
Reply-To: RE-wrenches
Subject: [RE-wrenches] Alternative t
Ya! The guy from Arizona that designed the Up Tower Jbox. I will try to dig up
some info on him too. Thanks!
Jeremy
All Solar
Sent via BlackBerry. Sorry for typos and shorthand!
-Original Message-
From: Tom Duffy
Sender: re-wrenches-boun...@lists.re-wrenches.orgDate: Mon, 23 Jul 2012
2
Wind Wrenches,
Can anyone recommend a tiltable, mono pole set up for the Whisper 100 turbine?
I have a client that wants to add wind power, but is shying away from the guy
wire option
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Look for burnt or hot spots near the top of the modules under the Jbox area. We
have replaced a lot of modules of that age
Ameresco solar is supposedly making the replacement modules
Jeremy
All Solar
Sent via BlackBerry. Sorry for typos and shorthand!
-Original Message-
From: "SunHarvest"
I have a request for Lithium batteries (ion?). Not sure how to respond. The
application is an off grid, part time mountain home
Any thoughts?
Thank you
Jeremy Ridriguez
All Solar
Colorado
Sent via BlackBerry. Sorry for typos and shorthand!
___
List spon
Wrenches
Can someone advise how to best check for a bad cell and or battery in a bank of
sealed AGMs
I have not installed many of these and have a client that I did for about a
year ago.
One looks like it may have leaked out some fluid from the top as it has some
white residue there
Jeremy Rod
Wrenches
Can someone please advise on the proper way to wire a meter to read 120V
inverter output. This is actually for production (RECs)
Thanks in advance
Jeremy Rodriguez
Sent via BlackBerry. Sorry for typos and shorthand!
___
List sponsored by Home Po
Wrenches,
Anyone know how to contact John Klima, past COSEIA president. I had used his
services in the past to repair an old C100 Diff. Controller.
Thanks in advance!
Jeremy,
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719
All,
Got it now!
My old spec sheets had no eff. listed
Jeremy
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.net
Email allso...@live.com___
List
Anyone know the module efficiency of Canadian Solar CS6P series?
They are closed today!
Thanks in advance,
Jeremy
All Solar, Inc
1463 M. St.
Penrose, Co 81240
719-372-3808
Fax 719-372-3804
allso...@scswifi.net___
List sponsored by Home Power magazine
Air products are reliable. Look at the Air Breeze. It will out perform the 400w
AirX
Sunforce 600- No way!
Jeremy
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.net
Email allso...@live.com
With 5 strings installed, I figured the charge rate to be about 3.3% (of C20
rate) for 5 years or so. Actually since it was installed in 2002, and now on
its second set of batteries.
We added some PV and an MX60 a year ago, and now this. I think he had heavily
sulfated batteries which eventua
Wrenches,
I am looking to install some Surrette dual container batteries. 24- 2v cells
and the inspector is looking for a 'listed' enclosure.
Any takes on this?
Jeremy
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
F
Anyone know where we might find some BP4175 modules?
Please contact me off list if so.
Jeremy
All Solar, Inc
1463 M. St.
Penrose, Co 81240
719-372-3808
Fax 719-372-3804
allso...@scswifi.net___
List sponsored by Home Power magazine
List Address: RE
Hello,
Has anyone any experience with SunDrum modules? PV with SDHW capabilities.
Any feedback is helpfull.
Jeremy
All Solar, Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.net
Email allso
Wrenches,
Once again I am trying to size a grid tie w/battery system and I struggle a
little with the efficiencies of them.
With PV Watts (v.1), is changing the DC to AC derate an accurate method for
getting the output?
Thanks in advance!
Jeremy
All Solar Inc.
Jeremy and Amy Rodriguez
1463
Wrenches,
I am looking for advice and or comments on system performance from a Grid Tied
battery back up system.
Is 65% efficiency fair as far as what goes back to the grid?
Is PV watts a good tool for that.
Commnets are welcome!
Jeremy
All Solar Inc.
Jeremy and Amy Rodriguez
1463 M St
Samlex America
- Original Message -
From: Jeff Irish
To: RE-wrenches
Sent: Friday, November 11, 2011 8:45 AM
Subject: [RE-wrenches] Small Off-Grid Inverter Recommendation
Any recommendations from those of you with extensive off grid experience for
a small inverter, sine wa
wn DC to DC converters.
Also, I'm up in Denver, and don't mind driving (buy my gas) if you ever need
any help.
Ray Walters
On 11/3/2011 4:26 PM, All Solar, Inc. wrote:
Hello,
I have a client running wireless comm. equipment that he would like to run
from a 24vdc batt
Hello,
I have a client running wireless comm. equipment that he would like to run from
a 24vdc battery bank. Even though it will operate either 12vdc or 24vdc, he
would like to maintain 24vdc +/- 4v. Any ideas out there would be helpfull.
Jeremy
All Solar Inc.
Jeremy and Amy Rodriguez
1463 M
Wrenches,
As I recall the Xantrex ALM and GSM are the same, but different :). Can anyone
verify?
Of course the relays would be labeled wrong if interchanged.
Jeremy
All Solar Inc.
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.net
Email
Wrenches,
It appears that Iota no longer offers the ITS30R transfer switch.
Is there an alternative that you would recommend?
Jeremy
All Solar, Inc
CO, USA
___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Wrenches,
I am looking for some advice on battery bank sizing.
I am using a C/20 rate so 160A charge = 3200 AH correct?
Looks Like 4v - 1350Ah batteries. 3 strings??
Thanks in advance!
All Solar Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone
thru the front of the
'white' panel's lid.
Thanks in Advance for any help
All Solar Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.
Wrenches,
Got a phone call from a gentleman that is in need of a device that will take
240v 60hz and synch with the local utility.
I guess kind of like a grid tie inverter, but AC in not DC input.
Any ideas?
Jeremy
All Solar Inc.
CO, USA
___
List
Jeff,
check out Gillette Generators.
Prime power warranty. and 'ok with inverter'
Jeremy
- Original Message -
From: "Jeff Yago"
To: "RE-wrenches"
Sent: Monday, March 29, 2010 8:53 AM
Subject: Re: [RE-wrenches] Kohler Generator Issues
Although we have specified and included Kohler R
Will not work with Xantrex TR series, formerly DR.
After the inverter was on for about 5 minutes, the AFCI breakers began
tripping.
Jeremy
- Original Message -
From: "Darryl Thayer"
To: "RE-wrenches"
Sent: Sunday, March 28, 2010 10:53 PM
Subject: Re: [RE-wrenches] AFCI compatibility
We now use Gillette Generators. Prime power warranty, 12kw, Honda Engine, 2
wire start, enclosed, Nice units. No issues so far.
Jeremy
All Solar Inc.
Jeremy and Amy Rodriguez
1463 M St
Penrose, CO 81240
www.asolarelectric.com
Phone 719-372-3808
Fax 719-372-3804
Email allso...@scswifi.net
Email
- Original Message -
From: "All Solar Inc. Jeremy Rodriguez"
To:
Sent: Tuesday, February 16, 2010 10:12 AM
Subject: Re: [RE-wrenches] 3 Phase Grid Tie with Battery Backup
Darryl,
I would say the utility is still learning.
10kw of PV to put into the grid or as large as
Thanks to all for the help. Its going to have to be an IG Plus. 208V Delta:
120V WYE config.
Wait til June for it...
Jeremy
___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settin
Positive Energy, Inc.
3201 Calle Marie
Santa Fe, New Mexico 87507
505 424-1112
www.positiveenergysolar.com
All Solar Inc. Jeremy Rodriguez wrote:
Thanks Darryl,
Allen, would you have to use 3 Sunny Islands? one for each phase?
The Utility wants a single inverter.
(motors will reverse and you may fry the OB transfer relay)
Next time you call outback ask a tech if you can slave the GVFX to make 3
phase,
--- On Mon, 2/15/10, All Solar Inc. Jeremy Rodriguez
wrote:
From: All Solar Inc. Jeremy Rodriguez
Subject: Re: [RE-wrenches] 3 Phase Grid Tie wi
Jeff,
That was my first choice, but I was told by Outback that they do not offer
a 120/208 inverter(s). I have not set up a three phase system yet, so bare
with me please. I was going to contact SMA next.
Jeremy
- Original Message -
From: "Jeff Oldham"
To: ;
Sent: Monday, Febr
Anyone know of a system for Battery Backup that can also be grid tied for 3
phase?
Our local Utilitly Co. wants system voltage to match service voltage.
Thanks in advance!
Jeremy___
List sponsored by Home Power magazine
List Address: RE-wrenches@list
WOW.
That a lot of info.
I couldn't even read it all. :)
- Original Message -
From: Antony Tersol
To: gilliga...@gmail.com ; RE Marketing for home scale RE industry
Cc: RE-wrenches
Sent: Thursday, February 11, 2010 2:47 PM
Subject: Re: [RE-wrenches] [RE Marketing] sales co
93 matches
Mail list logo
