Just went through the whole process again and got an Access Denied
error.
What is up with beonex?
doc
On Sat, 2002-12-28 at 11:20, Bob Goodwin wrote:
> David Colburn wrote -
>
> "Anyone out there know what else I might do before having to download
> ftp://ftp.netscape.
Yes, welcome to the old generation of PC.
Thanks you for your year-end notification and I just look into the bios
and mine is set to AUTO.
The only sad thing about this is I don't feel sufficient anymore about the
cpu speed. I bought this a couple year ago with duron 600 and now I have
it with 51
Much as I dislike it, just loaded the Flash plug-in. Mozilla sees it,
beonex does not. I chose the Mozilla and Netscape install options,
didn't get a prompt for beonex.
Tried to force /.beonex , refused.
Now what, please?
Thanks! doc
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://
Yes, this was happened to me. Checksums is correct but mediacheck said no.
Well, I turn to my 1x writing for this CD and It is working
On Sat, 28 Dec 2002, Greg Hanks wrote:
> I received the SAME results.. I downloaded the image files from a mirror
> site.. Checksums are correct, Loads the microk
he
NVidia drivers unloaded the APM module. I think my friend got around
this problem by upon shutdown (after X exited) unloading the NVidia
module and loading the APM module.
---
David Juran
Configuration Manager
E-mail: [EMAIL PROTECTED]
Phone: +46-31-7226259
Carmen Systems AB
Odins
Ben,
I am afraid that I was insufficiently clear -- Beonex is blocking the
opening of Mozilla -- thus it is a concern of Beonex if y'all wish folks
to use and promote the product.
doc
Beonex 0.8.1, RedHat 8
Sin
ave searched the Archives and posted a Bugzilla report.
>
> David,
> I'm confused by what you are asking. I can see that having Beonex
> might prevent loading Mozilla (they aren't really entirely different)
> but fail to see why that would prevent you from getting access
Patrick Marquetecken wrote:
How do i switch from text login to graphical ?
In /etc/inittab alter the line
id:3:initdefault:
to
id:5:initdefault:
---
David Juran
Configuration Manager
E-mail: [EMAIL PROTECTED]
Phone: +46-31-7226259
Carmen Systems AB
Odinsgatan 9
SE-411 03
>
> --
> Norman Madden <[EMAIL PROTECTED]>
>
> I have found a easy way to get reiserfs support in RH8.
> At the boot prompt (where you can choose f1, f2 etc)
> type: linux reiserfs
> (to load reiserfs support)
>
> then in the install you can format partitions as reiserfs.
> if this is documented an
On Sat, 2003-01-04 at 04:13, Dennis Gilmore wrote:
> use the cvs version of gaim the applet works fine for gnome and kde 3.1
> release candidates but not kde 3.0.
> Dennis
Just downloaded and installed CVS, that went smoothly, for a change.
Then went to get GAIM using the following process from
> On Sat, 2003-01-04 at 12:18, Miloslav Trmac wrote:
>
>> > > reiserfs and jfs are "totally unsupported" in the installer, grep
>> the anaconda source for a way to enable it.
>> >
>> >I wonder how much arm twisting it would take to get RH to add this?
>>
>> You misunderstood me. You can install
> that they feel is most stable and complete, and that's PostgreSQL.
There is no arguement that you can bring againest postgres being a better
database than MySQL.
So I understand why RH chose it also.
I was not aware of the data coruption issues w/ reiser, do any exsist
w/ JFS?
--
Psyche-l
Thanks for the suggestion, unfortunately ./autogen doesn't work either.
Does ./gen and ./autogen both failing suggest something I need to load?
doc
On Sat, 2003-01-04 at 21:50, Dennis Gilmore wrote:
> On Sun, 2003-01-05 at 06:07, David Colburn wrote:
>
> > Just downloaded
Hi,
I have RH8.0 and I am trying to find a Terminal Emulation package that
is compatible. I was told an earlier version of RH had a utility called
"cu", but I can't find any mention of this... open to ideas, thanks!
--
Regards,
David Delcourt
Network Security Consultant
NetScre
you might wanna check the root=/dev/hda? stuff on your lilo.conf make sure
it is the right path
On Wed, 8 Jan 2003, Chuck Mead wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Wed, 8 Jan 2003, glen posted the following:
>
> g>The first problem I encountered (one that has been repo
I had my up2date once worked, but now I got
# up2date
Traceback (most recent call last):
File "/usr/sbin/up2date", line 20, in ?
from up2date_client import rpcServer
File "/usr/share/rhn/up2date_client/rpcServer.py", line 10, in ?
import up2dateAuth
File "/usr/share/rhn/up2date_clien
; what errors are you getting?
>
> Dennis
>
> On Sun, 2003-01-05 at 14:17, David Colburn wrote:
> > Thanks for the suggestion, unfortunately ./autogen doesn't work either.
> >
> > Does ./gen and ./autogen both failing suggest something I need to load?
> &
OK, that's it! I just don't know where can I found
# rpm -ivh /mnt/cdrom/RedHat/RPMS/mozilla-1.0.1-24.i386.rpm
error: Failed dependencies:
libstdc++-libc6.2-2.so.3 is needed by mozilla-1.0.1-24
thx
.dave
Stray Alpha Particles from memory packaging caused Hard Memory Error on Server.
Yes I am using it right now :)
Good mouse btw.
> Is it possible to use this mouse with Psyhce?
>
>
>http://www.logitech.de/index.cfm?page=products/details&CRID=3&CONTENTID=4980&countryid=7&languageid=4
>
>
> --
> Jochen Kaechelin
>
>
>
> --
> Psyche-list mailing list
> [EMAIL PROTECTED]
> https:/
> Am Samstag, 11. Januar 2003 21:53 schrieb David Durst:
>> Yes I am using it right now :)
>> Good mouse btw.
>
> Something special to care about?
> I see nothing in Red Hat's mouse config tool?
>
> Plug it in and it works?
>
> --
> Jochen
Plug in a re-
Thx Michael, You've been my saviour!
Of course, i did rpm -q --redhatprovides libstdc++-libc6.2-2.so.3 but
nothing happens, well it showed no package provides
libstdc++-libc6.2-2.so.3 and was not compat...
Yes, it was compat...rpm but how do you get the that name?
On Fri, 10 Jan 2003, Michael F
I just bought the RHCE8 authored by Jang and RH8 Bible. These are the best
recomendation from amazon.
Anyway, I have the sybex rhce but I don't think it is a good book to pass
the rhce.. you must read and exercise more
thx
.dave
RHCE-wanna-be
- Original Message -
From: Jason Dale
To: [EMA
# Default Policy I/O DROP
iptables -P INPUT DROP
iptables -P OUTPUT DROP
# Rules
iptables -A INPUT -i eth0 -p tcp -d your_ip --dport 80 -j ACCEPT
iptables -A OUTPUT -o eth0 -p tcp -d your_ip --dport 80 -j ACCEPT
thx
.dave
ps. I'm not really sure about what you ask for
- Original Message ---
ing an error message.
Also, spell checking works great for me. Maybe I'm using different rpms.
I got my evo-1.2 rpms from here btw:
http://people.redhat.com/~katzj/evolution/
David
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/psyche-list
To turn on spell checking I used (in Evolution)
Tools->Settings->Composer Preferences->Spell Checking and enabled
English and (in my case) Swedish. I also checked the "Check spelling
while I type"-box.
Hope any of this helps.
David
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/psyche-list
At least you were getting somewhere. I was downloading disc 1 and disc 2 at the
same time. The first one hung about 2 hours ago; the second about an hour, but
it has since picked back up. I'm ready to go looking for a mirror... but I
suppose it's all a moot point anyway until nVidia releases a s
gal20-0.20.1-1.i386.rpm
Found it on http://rpmfind.net - It worked for me, IIRC.
David
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/psyche-list
On 7.3, I had no problem running sensor-detect, loading what it told me
to load, and getting temps and fan speeds. Now when I do a detect, I see
these errors. The script completes, and I load what it tells me to load,
but I can't run `sensors' and get anything. I suspect this is trying to
tell
Oops; I still hadn't loaded the actual driver for my chip.
Sorry,
dk
David Krider wrote:
On 7.3, I had no problem running sensor-detect, loading what it told me
to load, and getting temps and fan speeds. Now when I do a detect, I see
these errors. The script completes, and I load wh
I get this message every time I close VMware:
Oct 03 04:53:12: scsi0:0|NOT_IMPLEMENTED F(831):654
This started happening on the two computers that I use with VMware right
after installing 8.0 cleanly. I updated to the latest VMware Workstation
on the one, but that didn't fix it. I tried shuttin
t;
> Must i activate something ??
>
Either Actions -> Expunge or enable View -> Hide Deleted Messages. I
prefer the latter.
David
Jay Turner wrote:
Just one note here. I seem to remember that if you explicitly select to
install the SMP kernel in the installer, then it will be made the default
boot kernel. I might be smoking crack, but I think that I remember this.
- jkt
This is a really good point. At least on 7.3, i
Is there any way to change the metacity window manager theme?
Is there any way to change the fonts in GTK1 apps (e.g. Evolution)?
Thanks,
dk
er,
running Linux or Windows.
Thanks for the tip, though; I'll make a note of it.
dk
Mark C wrote:
On Tue, 2002-10-01 at 20:48, David Krider wrote:
Is there any way to change the metacity window manager theme?
Menu | Preferences | Theme | Window Border
Is there any way to change the
Sorry for the slightly off-topic question, but does anyone know how to
change the font in the Mozilla user interface? (Not the fonts for web
pages, but the actual program itself.)
Thanks,
dk
After a little searching, I see that the proper way to get ALL the fonts
to change is to use a `*' in place of `window' in their example.
Pete Huckelba wrote:
http://www.mozilla.org/unix/customizing.html
would be the best place to get any information on topic.
Sorry for the slightly off-top
In 7.3, I just did a sensors-detect, loaded everything it told me to,
enabled the sensors part of gkrellm, and I was off to the races. With
the clean install of 8.0, I do a detection, load everything it tells me
to (which looks different, but I didn't save the old setup because who
would have t
loaded XMMS and
> reinstalled both from package and from source with no luck.
>
Try installing the xmms-mp3-plugin, available for 8.0 here:
http://psyche.freshrpms.net/rpm.html?id=107
David
t;telnet
> $public_ip mysql" closes the connection.
>
> In bugzilla one can find an strace which shows that mysqld segfaults after
> setting some socket options.
On one of my servers it seemed to be a problem with reverse DNS. Try
adding the ip of the connecting box to /etc/hosts. Worked for me.
David
e spent on
computers.
It's about time I trashed those stupid Ars Technica badges. What have
they done for me lately?
I'm probably going to get sued for saying this on this list though,
dk
--
David "Dunkirk" Krider
Acts 17:28, "For in Him we live, and move, and have our being.
> > 1. Log into KDE as a regular user, or root, it doesn't matter. The
> > important part is that you log into KDE.
> > 2. Type "nautilus" in a terminal window, (I haven't tested this
> > part, but I suspect that you could start nautilus any way you
> > wanted) 3. Watch you KDE desktop turn into a
. When I got into the system for the first time, I
noticed that the installer had put the `vesa' driver in the XFConfig
file instead of the `nv' driver. What's up with that?
dk
--
David "Dunkirk" Krider
Acts 17:28, "For in Him we live, and move, and have our being
river DID NOT WORK. I had to change the driver to
"nv" by hand at a command prompt.
dk
--
David Krider, Senior Development Engineer
ArvinMeritor, Light Vehicle Systems Information Technology
tyrannus 2.4.18-10smp #1 SMP Wed Aug 7 09:36:38 EDT 2002
1:55pm up 4 days, 21:03, 0 users
ught to check the output. I just figured it
was "broke" and moved on. And I also didn't think about the possibility
that VESA was limited in terms of resolution and color depth. In
retrospect, that would certainly make sense, given the timeframe that
VESA was a popular way of ru
thing else aside, when I posted to the list, I was prepared to
destroy them if someone from RedHat asked me to. I respect what they've
done for me too much to treat them otherwise. It was a love for the
distro that caused me to get them made in the first place.
dk
--
David "Dunkirk" Kri
h this thread, everyone I've shown these things
to has drooled over them. I think you guys could make some money selling
them like you do shirts and such...
--
David "Dunkirk" Krider
Acts 17:28, "For in Him we live, and move, and have our being."
enterprise 2.4.18-10sm
ge
Jun 2 14:15:00 igor kernel: scsi0:0:5:0: Command not found
Jun 2 14:15:00 igor kernel: aic7xxx_abort returns 0x2002
==
Thanks in advance.
-- David Bell
[EMAIL PROTECTED]
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://www.red
s my boot disk (of course). I'm familiar
with dd but I'm not quite sure how to make a new boot disk from the old one
when the new disk is of a different size.
-- David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Hattie Rouge
Sent: Tuesday
stat" with no luck. I
did "man stat" and get it's man page so I assume stat is installed. I'm
running RH 8.0 2.4.20-20.8 with a fully updated system except for
iptables. Can anyone help by telling me what I'm doing wrong? Thanks in
advance!
--
David E. Williams
[EMAIL
Craig,
Thanks. You saved the day for me!
On Wed, 2003-09-17 at 15:52, Craig White wrote:
> On Wed, 2003-09-17 at 13:06, David E. Williams wrote:
> > Hi all,
> >
> > I'm running iptables-1.2.6a-2 and am trying to update the package to
> > iptables-1.2.8-8.80.2.
Mutt seems to have lost the ability to use the line drawing characters in
its threaded mode when run in a terminal emulator. I'm using rxvt with a
7x14 font and have tried both
env LC_ALL=en_US mutt
and
env LC_ALL=C mutt
but no luck. I've also tried xterm. On the other hand, slrn seems to ha
On Fri, Oct 25, 2002 at 09:52:31PM -0400, Jonathan M Slivko wrote:
> Did it work when you used 7.3, or did this just start happening when you
> upgraded/installed 8.0? Thanks.
Yes, just tested it on a 7.3 system, and the drawing characters show up find
there.
Dave
On Sun, Oct 27, 2002 at 11:39:03PM +0200, Robert Golovniov wrote:
> went OK via OSS. The biggest problem, though, is the actual "screen"
> size. Even in full-screen mode, I still get only very little window.
> Changing the "size" options did not do a thing.
Did you try -zoom?
mplayer -vo
On Wed, Oct 30, 2002 at 11:27:07PM -0500, Hal Burgiss wrote:
> > e) what font you're using
>
> Tried lucidatypewriter (my normal preference), also Luxi Mono, and
> courier.
Only the fixed fonts (e.g. 7x14, 8x13, 10x20, etc) have the drawing characters,
AFAIK.
Dave Cook
On Wed, Oct 30, 2002 at 10:45:50PM -0500, Bill Nottingham wrote:
> Works for me in gnome-terminal.
Using what font? Doesn't work for me using gnome-terminal, xterm, or rxvt.
But I don't know how to set the usual fonts that work in gnome-terminal as
its font selection list doesn't seem to offer
On Thu, Nov 14, 2002 at 05:24:14PM +1100, Wolfgang Gill wrote:
> I am currently setting up RH8.0 for a friend on his Compaq Armada M700
> Notebook. All is working ok. BUT, I would like to configure the CD-ROM which
> does it all, CD, CD/RW, DVD. It can see the device as /dev/cdrom. But I
> can't s
How does one determine the config file in /usr/src/linux-2.4/configs that
corresponds to the running kernel?
David
On Fri, Oct 25, 2002 at 06:45:21PM -0700, David M. Cook wrote:
> Mutt seems to have lost the ability to use the line drawing characters in
> its threaded mode when run in a terminal emulator. I'm using rxvt with a
> 7x14 font and have tried both
I built mutt from the mutt.org
Looks like a bug in dvips -- when I do dvips f.dvi expecting it
to go to the printer I get the error "Can't open output pipe". Lines from
the strace are below, clearly the stat64 call should fail.
25493 read(3, "% teTeX\'s config.ps. Thomas Esse"..., 4096) = 2366
25493 stat64("|lpr", 0xbfffea50)
On Sat, Nov 16, 2002 at 06:36:13PM -0800, anthony baldwin wrote:
> Hvae any of you run pgAccess?
> Are there any other non-proprietary, gpl database gui front ends?
> I am having difficulty with pgAccess. I htink it may be an issue with my
> Postgres set up. I seem to be unable to create a non
On Sun, Nov 17, 2002 at 04:57:04PM -0800, Jesse Keating wrote:
> You really should use (su -) also, instead of just (su)
It's really not adequate to just state somethinglike this, you really need
to explain why. I'm aware of the differences between su and su - but do not
consider it important in
On Sat, Nov 16, 2002 at 06:36:13PM -0800, anthony baldwin wrote:
> Hvae any of you run pgAccess?
> Are there any other non-proprietary, gpl database gui front ends?
> I am having difficulty with pgAccess. I htink it may be an issue with my
> Postgres set up. I seem to be unable to create a non
On Thu, Nov 21, 2002 at 09:40:53AM -0600, Hal Watson wrote:
> My hardware is a Pentium II - 350, with 128mb ram. My video card is
> nothing special, maybe 8mb ram.
>
> The default Gnome setup seemed kinda slow - so I gave KDE a try and
> that definitely seems faster on my machine and coming from
On Sat, Nov 30, 2002 at 08:09:55PM -0500, David Mascot wrote:
> [root@localhost dmascot]# /etc/fonts/fonts.conf
> bash: /etc/fonts/fonts.conf: Permission denied
Dammit, why *shouldn't* files know how to edit themselves!
Dave Cook
--
Psyche-list mailing list
[EMAIL PROTE
Am I correct in assuming that in order to be able to use DualHead on my
G400, I need to wait for Matrox to release drivers compiled on Psyche?
Thanks,
-JDQ
Applications usually use the lpr or lp commands to print.
that command is actually nowadays a link to the true command.
for cups, the true command is lp.cups
so /usr/bin/lpr is a link to /usr/bin/lpr.cups
Does anybody know what is the gui app/conf.file that deals with this
link?
On Thu, 2003-01-16
that needed 6 tapes, 3 hr EACH!
My dvdbu scripts are new and lightly tested. I'd be happy to share
them by direct email with anyone willing to give some feedback.
--
David A. De GraafDATIX, Inc.Hendersonville, NC
[EMAIL PROTECTED](828) 696-8646; fax (828) 69
On Wed, 2003-01-29 at 15:33, Jesse Keating wrote:
> On Wednesday 29 January 2003 13:16, [EMAIL PROTECTED] wrote:
> > I think the .xinitrc goes to your home directory, so its the best place for
> > it. There are other files for your $HOME, like .Xdefaults and such that are
>
> .Xclients and .Xclien
On Tue, 2003-02-11 at 17:17, Stephen Mah wrote:
> I'm looking for a command line program that converts between ascii and
> hex and vice versa.
I think you might be looking for hexedit.
or others like it.
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo
On Tue, 2003-02-11 at 13:07, Scott Taylor wrote:
> I'm curious...do you have to be in some special club to get your email posts
>answered.
>
I dont know how to solve your problem, sorry, but
1. You either must be subscribed to the mailing list (much traffic) or
have stated that you were not on t
On Tue, 2003-03-18 at 10:43, Michael Smith wrote:
> Well I got it to start it's own Gnome Session, so there ought to be a
> way...
>
There is not one that i have heard of. They will at most share some
resources, but thats all.
more than one session can share a vnc session though.
--
Psyche-li
I had a similar problem, but it messed with my sound card and modem
(couldnt get both working right at the same time)
After some messing, I came to the conclussion that something on RedHats
initrd was overwriting de modules.conf file, so I had my own kernel
compiled, and not using any initrd (buil
On Tue, 2003-08-12 at 01:32, [EMAIL PROTECTED] wrote:
> All,
>
> How can I create/write/read the various
> Unicode files(like UTF16-LE, UTF8, UTF16-BE)
> In Advanced Server 2.1 or RH 8.x/9.x?
>
> When I write a binary file using fputws(), the letter 'A' should be
> added
> As '00 41', but it
On Sun, 2003-08-17 at 17:49, bruce wrote:
> hey..
>
> a simple quesiton that i can't seem to find the answer for...
>
> how do i as the root..kill a user!!!
>
> i can do "users" and get a list of the users..but how do i kill/terminate
> one...???
>
to cleanly and securely terminate a user, yo
On Thu, 2003-09-11 at 08:22, Suresh Babu A. [IT Engineer] wrote:
> Dear All,
>
> What is the default format utility in red hat [no GUI Tools please]?
>
it depends on the filesystem you want to create.
but to generalize, mkfs.
(see man mkfs and be careful)
--
Psyche-list mailing list
[EMAIL PRO
Hello.
I have just started using psyche, BIG leap from limbo. Much faster!
But I think I must have messed something because i am getting mostly
foot icons on startup screen. My guess is they are not found.
Anyone knows what package has them?
Thank you.
Since you upgraded, something might have gone wrong.
Try uninstalling XFree packages and reinstalling them.
On Sun, 2002-10-27 at 00:02, Jerry wrote:
>
> Hello,
>
> I have a major problem with 8.0 that I didn't have with 7.2. Here is the
> problem: I just casually do things etc like just scroll
On Sun, 2002-10-27 at 18:45, Norman Nunn wrote:
> I assumed you right clicked on the panel icon and checked properties or
> preferences to eventually select an icon. I believe these icons are in
> /usr/share/icon or /usr/share/pixmaps. My setup added the correct icons
> during installation but I
man works like so many editors in Unix, so you can use /window to find
the window word.
However, I tend to use info instead of man, who can open both man and
info pages, and uses 's' or Ctrl+s for searches.
On Sun, 2002-10-27 at 20:36, Stephen Liu wrote:
> Hi All,
>
> After starting 'man' comman
> I'll have to remember to kill that one off next time. Thanks for
> the reminder. ;o)
Speaking of killed programs, In the days I started using linux (im not
an old playere here) I started when RedHat was in 4.2.
There were some good games for X (and some text based games) that seem
to be gone.
Yes!
very nice game. And I thought it had died away...
however, it eats a lot of cpu time in my PC. Do you think it would be
gone if I rebuilt or is it something that can be improved?
Thank you.
>
> Sounds like LBreakout2 to me.
> It installs and runs fine on RH8.0
On Mon, 2002-11-04 at 05:28, Bernd Kunze wrote:
> Hi,
>
> I've just purchased the 8.0 Pro EMEA version and found that the DVD only
> contains the 3 binary and 2 source CD's. Any particular reasons why the
> other two CD's did not make it on the DVD? Is the US version the same?
> I found it quite h
On Mon, 2002-11-04 at 06:06, Jeremy Tarling wrote:
> Hello, I wonder if anyone can help with this problem.
>
> When I startx as my normal user login everything works fine. However,
> when I run startx as root, it appears to start but gets no further than
> a black screen with an 'x' style mouse
I just went to this site and clicked on WABC (the lightning bolt icon to
play the Internet feed) and a window popped up asking if I wanted to
save or use an application but there wasn't an application option given.
How does one play streaming audio in RH 8, please? (Don't have a manual
set yet.)
h
In RedHat 8 I visit this site and request the loop and get a blue puzzle
piece and no looping video. Suggested solution, please?
http://www.srh.noaa.gov/radar/loop/DS.p19r0/si.kmlb.shtml
Thanks! doc
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/
From: "Dr. David M. Colburn" <[EMAIL PROTECTED]>
> Date: 15 Nov 2002 10:54:04 -0500
> To: [EMAIL PROTECTED]
> Subject: How to Play These Streaming Online Radio Feeds?
>
>
> > I just went to this site and clicked on WABC (the lightning bolt icon to
> > play
I chose the Linux i386 rpm version rather than the old RH6.2
version, not sure if that was the best choice.
I did the download and followed the instructions:
as root ...
mv rp8_linux20_libc6_i386_cs2_rpm rp8.linux20.libc6.i386.cs2.rpm
then ...
rpm rp8.linux20.libc6.i386.cs2.rpm
got instructi
Mozilla, unmodified from the generic RH8 install.
doc
On Fri, 2002-11-15 at 22:55, John P Verel wrote:
> What browser? My Mozilla works fine.
> On 11/15/02 19:35 -0500, Dr. David M. Colburn wrote:
> > In RedHat 8 I visit this site and request the loop and get a blue puzzle
>
02-11-13 at 20:04, Dr. David M. Colburn wrote:
> > > I purchased StarOffice 6.0 just prior to recently switching from SuSE 8
> > > to RH8.
> > >
> > > It was my understanding that Sun's investment in this commercial version
> > > of OO produced somet
Oops! That would help ... ;-)
Thanks! doc
On Sat, 2002-11-16 at 04:52, Emanuel Mair wrote:
> You forgot to supply the "-i" (install) argument above. Or "-ivh" if you
> want some visual feedback that rpm actually is doing its stuff:
> rpm -ivh rp8.linux20.libc6.i386.cs2.rpm
--
Psyche-list
Ok, RealPlayer is up and running fine -- appreciate y'all pointing
out my obvious flub!
Now I have found another need for a player:
When I click on LSITEN LIVE at http://www.dcradio700.com/ Mozilla
doesn't bring up an app.
What app do I need to load to handle the video/x-ms-asf please?
Thanks
22megs via a 56k (try 28k typical) dialup out here in the woods? Ouch!
Is there a smaller version that works? I am guessing not ... sigh.
Guess I will start it later when I don't need bandwidth for other
purposes.
Right now gotta load up gPhoto for the kiddies Polaroid 320.
Thanks! doc
>
Just tried to run launch up2date and received:
Error Class 9
Run rhn_register as root
Did so and was told by Bash that the command was not found.
Help, please? Thanks! doc
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/psyche-list
> > Just tried to run launch up2date and received:
> > Error Class 9
> > Run rhn_register as root
> > Did so and was told by Bash that the command was not found.
>
> Run "up2date --register".
This brings up the update x-window. Tried to log in and was told that
my account and password was alrea
Whenever I start-up I get a window saying:
"Error starting the Gnome Settings Daemon.
The Settings Daemon restarted too many times.
Last error message was:
Failed to activate 'OAF11D:GNOME_SettingsDaemon.
GNOME will still try to restart the Settings Daemon
next time you log in."
I need to know h
Haven't tried Mandrake 9 but watched as others at the local LUG
struggled with problems in the prior version much the same as some do
with RH8. I imagine the next major version of RH will at least match
Mandrake 9 (such is the nature of competition).
I switched to RH8 from SuSE8 and am pleased th
I am testing an HP CD-Writer+ 7200, and each time I try an write a CD it
has freezed the system.
It might be possible the unit is damaged, since its not mine and someone
gave it to me to test it. But I remember someone having a similar
problem, but I lost that thread. Anyone can help please?
Was
2002$BG/(B12$B7n(B08$BF|(B($BF|(B)$B$N(B15$B;~(B30$BJ,$K(B Tom Diehl
$B[)$/(B:
(B> On 8 Dec 2002, Jonathan Gaudette wrote:
(B
(B>
(B> How about trying to troubleshoot the problem by telling us EXACTLY what you
(B> are doing. Is there anything in the logs?? How do you recover
2002$BG/(B12$B7n(B09$BF|(B($B7n(B)$B$N(B03$B;~(B14$BJ,$K(B Michael
(BSchwendt $B[)$/(B:
(B> -BEGIN PGP SIGNED MESSAGE-
(B> Hash: SHA1
(B>
(B> On 08 Dec 2002 22:55:29 -0600, David Eduardo Gomez Noguera wrote:
(B>
(B> > from dmesg
(B> >
ne guess what's wrong?
Can anyone suggest where to look for help? what to ask???
--
David A. De GraafDATIX, Inc.Hendersonville, NC
[EMAIL PROTECTED](828) 696-8646; fax (828) 694-1037
--
Psyche-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/psyche-list
201 - 300 of 304 matches
Mail list logo
