Sorry for randomly chiming in,
But I noticed your version of LyX is using Qt5, I wonder if a QT6 version would
behave differently?
(Unfortunately, I'm not a Mac person, so I don't know how to compile such a lyx)
— Isaac Oscar Gariano
From: lyx-users
LyX tell me it can't find the a
LaTeX class, when I definitely had LaTeX installed properly; I can't remember
what the cause of it was though, probably my fault for not building LyX
properly).
— Isaac Oscar Gariano
From: lyx-users on behalf of Daniel CLE
uto'
export LDFLAGS='-flto=auto'
../configure --enable-qt6 --without-included-boost --with-aspell
--with-hunspell --with-enchant --enable-build-type=rel
make
make install
— Isaac Oscar Gariano
From: lyx-users on behalf of Peter
Sent: Tuesday,
Dear Daniel,
I personally am not familiar with MacOS, but it sounds like LyX isn't finding
your files correctly.
If you go to Help → About LyX, it will list a folder as "User directory",
Does that folder contain the bind/user.bind file you want to use?
— Isaa
That's not good, Linux GUI problems are often very hard to debug...
I'm guessing the xcb issue might be because you are a different user, but you
can try using "QT_DEBUG_PLUGINS=1 lyx" to
get some more information.
You said you got lots of error messages, perhaps if you run `lyx -x lyx-quit`
l
adding extra completions.
If none of these features are present in LyX, would it be OK and not too
difficult if I tried to implement these myself?
— Isaac Oscar Gariano
tex to the preamble file)
Thank you very much for your comment Curtis
Best regards
Oscar
On Thu 20 Oct 2011 05:25:57 PM EEST, Oscar Lopez wrote:
> Dear LyXers
>
> I have recenty updated my lyx version to lyx 2.0.1 and I have
found that
> using relative paths to t
ll lyx anything
Thanks for your comments
Best regards
Oscar
Spyros
On Thu 20 Oct 2011 05:25:57 PM EEST, Oscar Lopez wrote:
Dear LyXers
I have recenty updated my lyx version to lyx 2.0.1 and I have found that
using relative paths to tex files at the lyx preamble does not work anymore.
I
ecked documentation and gmane mailing lists and I couldn't
find any answer. Can I customize lyx behaviour to get gather multiline
environment when I hit CTRL+Enter using the AMS math package?
Thanks in advance for your help
Best regards
Oscar
Steve Litt wrote:
On Monday 25 May 2009 10:40:43 am Oscar Lopez wrote:
What surprises me is that it's dependent on LyX version. If the LyX file is
called bar.lyx, I'd like to see you do the following:
lyx-1.5.4 -e latex bar.lyx
mv bar.tex bar-1.5.4.tex
lyx-1.6.2 -e latex
Enrico Forestieri wrote:
Jürgen Spitzmüller writes:
LyX does this automatically for you, that's why your document works if the
code is inserted directly to the preamble. In former versions, Lyx blindly
embraced any preamble with this pair. Now, it tries to be smart and only
embraces it if
Jürgen Spitzmüller wrote:
Oscar Lopez wrote:
* if the lyx preamble consists of \input{foo.tex} it does not work and
the aforementioned error appears. If I enclose \input{foo.tex} between
\makeatletter and \makeatother then it works, which really puzzles me.
*if the content of the preamble
oblem could be solved. Perhaps I am missing something quite evident
and I am writing rubbish. Any comment or suggestion is appreciated.
Thank you very much for all your help
Best regards
Oscar
Oscar Lopez wrote:
Dear Lyxers
I am trying to use a lyx template which uses the memoir book class
other packages.
My question is that if there have been some modifications to the memoir
layout from lyx-1.5 which can be responsible of the error. Do you have
some advises to debug the problem because I am running out of ideas?
Thank you very much for all your help
Best regards
Oscar
Oscar Lopez wrote:
BcBob wrote:
The matlab code and a sample Lyx document are in the attached zip file.
Bob
http://n2.nabble.com/file/n2865240/matlab2tex.zip matlab2tex.zip
However, I tried to test a simple matlab file, following the notes on
the lyx file, and I got the following error
write_highlighted_code(mfid,outfid,opt)
Error in ==> matlab2tex at 57
highlight(mfile,opt,fid);
FYI matlab version is
>> version
ans =
7.4.0.336 (R2007a)
Best regards
Oscar
Jürgen Spitzmüller <[EMAIL PROTECTED]> writes:
>
> Oscar Lopez wrote:
>
> RTFM (beameruserguide, sec. 11.6). There's a good rationale provided why it
> is
> so.
I am sorry, my fault. I looked for "float" and nothing relevant appeared. Next
time I'
Dear Lyxers
When I insert a Float Figure in a beamer presentation with a caption the label
counter it does not show at the pdf output. However, if i insert a reference to
the figure label this reference is correctly displayed at the pdf output. Is
this expected? Is there any way to include a numbe
Oscar Lopez <[EMAIL PROTECTED]> writes:
Thank you very much for your contributions to this thread
I would like to give a brief summary of what I have been able to learn
I gave a try to inkscape however it seems that the render of latex formula is
broken at linux at version 0.45. Last
Dear lyxers
I am starting a document project with a colleague using lyx. The goal is to
obtain a big document of a technical course. My colleague uses the windows
version of lyx and I use the linux version. At this initial stage we can easily
share simple documents. Now we are concerned with the
Jürgen Spitzmüller <[EMAIL PROTECTED]> writes:
>
> Paul A. Rubin wrote:
> > Apparently, as of a recent version, LyX loads mathptmx automatically if
> > you select Times Roman as your Roman font. Since mathptmx has no bold
> > symbols, I can see this being a problem, and I'm surprised it was done
Paul A. Rubin <[EMAIL PROTECTED]> writes:
>
> Oscar Lopez wrote:
>
> Apparently, as of a recent version, LyX loads mathptmx automatically if
> you select Times Roman as your Roman font. Since mathptmx has no bold
> symbols, I can see this being a problem, and I'm
Dear all
It seems that pdf output of boldsymbol math does not show properly when the
command \boldsymbol is used. I am using lyx-1.5.4 (compiled version using
kubuntu and texlive)
Open a new document (article) enter a math inset with \boldsymbol* an enter a
letter \boldsymbol{a} \boldsymbol{\alph
Oscar Lopez <[EMAIL PROTECTED]> writes:
> However the old beamer lyx files with that
> produces latex errors.
Sorry I meant "However the old beamer files using lyx-1.4.x with that produces
correct latex and pdf output."
Jürgen Spitzmüller <[EMAIL PROTECTED]> writes:
>Does it crash on any file or only on specific files? If the latter, do these
>files contain something specufic, such as a branch inset?
It crash on a simple beamer lyx file (just a frame and an item, no text with
branches, no notes, nothing particul
José Matos <[EMAIL PROTECTED]> writes:
> I think that in this case the problem is not lyx2lyx but it is a bug that is
> scheduled to be fixed in 1.5.3.
Please could you elaborate more on that? I mean, I have tried to produce, using
lyx-1.5.2, a minimal example showing the problem and I haven't s
Hello
When I try to export a pdf file using the command line at my linux box the I get
the following message
% lyx -e pdf2 file.lyx
lyx: SIGSEGV signal caught
Sorry, you have found a bug in LyX. Please read the bug-reporting instructions
in Help->Introduction and send us a bug report, if necessa
Paul A. Rubin <[EMAIL PROTECTED]> writes:
>
> No, I've had no problems opening old beamer presentations (and, like
> you, I have a bunch of them). The format for LyX document files evolves
> with new releases, and there is a conversion tool included with LyX to
> convert older format LyX file
Hello lyxers
Yesterday I updated from lyx-1.4.x to lyx-1.5.2 and first of all I would like to
thank to developers for such a great software.
The first try I did when testing the new version was to load a beamer
presentation I was working on. The first thing I got was a bunch of errors in
the Lyx
> Oscar Lopez wrote:
>
>> As a side note, how the external inset knows if the fig file must be
>> exported as combined ps/latex, it scans the fig file looking for the
>> special flag of the text?
>
> No. As you can see from the definition of the xfig external inset
Quoting Georg Baum <[EMAIL PROTECTED]>:
> Jean-Pierre Chretien wrote:
>
>> Seems that lyx does not add the required \usepackage{xcolor}
>>when an xfig
>> inset is present, I had to add it manually to make it work.
I added \usepackage{xcolor} to the preamble and it worked as expected
>
> Why xcolo
Quoting Georg Baum <[EMAIL PROTECTED]>:
> [EMAIL PROTECTED] wrote:
>
>> I thought that external inset shipped with 1.4.x was able to manage
>> this situation, perhaps I am wrong.
>
> It should. Please send a minimal example .lyx file + .fig file, so that
> we can reproduce the problem.
Attached a
Dear Lyxers
I am trying to use the xfig external inset in order to include xfig
figures with latex text embbeded. When I insert an external xfig file
that consists of text, lets seay, $H_2$, the postscript and pdf
outputs show the text as it is, although the text was marked as
special in
ion I would like a horisontal line
on either side of the top row and a horisontal line at the end of the
table.
I second that
--
http://www.iit.upco.es/~oscar
The sudden sight of me causes panic in the streets. They have yet to learn
-- only the savage fears what he does not understand.
Salve, LyX user,
I'm having some troubles with accentued letters, becouse they are not
displayed in Lyx nor in .ps or .dvi output.
I'm currently using now FC3 and I thought those problems might be
related with broken qt package. So, I downloaded qt stuff from kde-
redhat.sf.net *b
El lun, 13-12-2004 a las 08:01 +, Jose' Matos escribiÃ:
> On Saturday 11 December 2004 20:42, Oscar wrote:
> > Greetings,
> > Just a quick email to ask you if this problem is fixable or if it is a
> > bug: when I run spellchecker in LyX 1.3.5-1_qt (with
El sÃb, 11-12-2004 a las 21:42 +0100, Oscar escribiÃ:
> Greetings,
> Just a quick email to ask you if this problem is fixable or if it is a
> bug: when I run spellchecker in LyX 1.3.5-1_qt (with qt-3.3.3-11 [from
> kde-redhat.sf.net]), the accents (like à ...) are not sh
38653 "problems with acents
in portuguese (latin1) in lyx 1.3.5) and followings).
No difference either with aspell or ispell.
Please tell me what configuration should I give (i18n?).
Any ideas?
Regards,
--
Oscar <[EMAIL PROTECTED]>
>
> > Please reply solutions to
> > [EMAIL PROTECTED]
>
> I hope this helps,
Thanks in advance for your understanding.
--
Oscar <[EMAIL PROTECTED]>
/
more particularly
http://lml.ls.fi.upm.es/manuales/bibtool/m_1_2_4.html
Best wishes
--
http://www.iit.upco.es/~oscar
User hostile.
wever I could be completely wrong, so sorry if this is not the case.
Hope at least someone could benefit of the advantages of gloss.
Best wishes
--
http://www.iit.upco.es/~oscar
Make me look like LINDA RONSTADT again!!
#LyX 1.3 created this file. For more info see http://www.lyx.org/
\lyxformat 221
\t
Dekel Tsur wrote:
On Thu, Jan 23, 2003 at 06:32:09PM +0100, Oscar L?pez wrote:
postscript and pdf outputs from the same latex file, afaik there no
exist an efficient pdffrag or something like that.
Why do you need that ? You can use ps2pdf.
In the past I experienced a lot of problems
Matej Cepl wrote:
Oscar López wrote:
I meant that in order to produce a more automatic solution. The
problem is I produce metapost files from several applications,
mainly xfig, gnuplot, and metagraf. Most of the times it is not
Why do you go through MetaPost then? Both xfig and gnuplot can
Matej Cepl wrote:
3 Several messages complaingin of dvips are:
This is dvips(k) 5.86e Copyright 2001 Radical Eye Software
(www.radicaleye.com) ' TeX output 2003.01.21:1843' -> foo.ps
dvips: Font cmr10 used in file /home/oscar/tmp/mp/fnflm_p.0 is
not in the mapping file. dvips: Fon
dvips: Font cmr10 used in file /home/oscar/tmp/mp/fnflm_p.0 is not in
the mapping file.
dvips: Font cmmi10 used in file /home/oscar/tmp/mp/fnflm_p.0 is not in
the mapping file.
dvips: Font cmmi7 used in file /home/oscar/tmp/mp/fnflm_p.0 is not in
the mapping file.
dvips: Font cmsy10 used in file /
Matej Cepl wrote:
Oscar López wrote:
This foo.# is an almost eps file. In fact if someone tries to view
this eps using gv an error is triggered. Only latex when this file
is included using \includegraphics knows how to proceed
You can make it into an adult EPS file by adding command
Jean-Marc Lasgouttes wrote:
"Oscar" == =?ISO-8859-15?Q?Oscar L=F3pez?= writes:
Oscar> Hello lyxers I have recently upgraded to lyx-1.2.3 from lyx
Oscar> -1.1.6fix4 and I am experiencing some problems with the
Oscar> inclusion of graphic files. I am trying to include t
Matej Cepl wrote:
Oscar López wrote:
No information for converting from 0 to eps
Does adding 0 to Edit/Preferences/Converters/File Format/EPS
help?
I added the format 0 as other file format and it doesn't help. Moreover
it does not make sense to add 0 as new format because pseud
http://www.iit.upco.es/~oscar
"Roman Polanski makes his own blood. He's smart -- that's why his
movies work."
-- A brilliant director at "Frank's Place"
ore
information in order to solve your problem.
Hope it helps
Best wishes
--
http://www.iit.upco.es/~oscar
Theorem: a cat has nine tails.
Proof:
No cat has eight tails. A cat has one tail more than no cat.
Therefore, a cat has nine tails.
rom the 1.1.6 up to 1.2.
More particularly, the math-extern feature is one of the most notable
improvements i have seen and I am sure that for the 1.4 cycle there are
many other math enhancements waiting for, specially in the math-extern
functionality, I hope.
--
http://www.iit.upco.es/~oscar
Your l
The tex2pdf team is really pleased to announce the new stable release
of tex2pdf. (tex2pdf 3.1)
DOWNLOADS
You can download tex2pdf 3.1 from
http://download.berlios.de/tex2pdf/tex2pdf-3.1b.tar.gz
NEW FEATURES
* Support for figures with dots in their filename
* Support for multiline TeX tags an
Dekel Tsur wrote:
>
> On Wed, Feb 06, 2002 at 12:14:00PM +0100, Oscar Lopez wrote:
>
> Use something like this:
>
> In the preamble:
> \usepackage{framed}
> \def\xcaption#1{%
> \fs@boxed%
> \def\@captype{algorithm}%
> \caption{#1}%
> \unvbox\@flo
algorithm, the
text is centered inside the float and there is no framebox. So, please
could you point me out a way to solve these problems? i.e
1. The caption located at the bottom of the algorithm
2. The framebox extended over more than one page
Thanks a lot for your help
Greetings
Oscar
--
http
ent->Extra->Use AMS Math
and then
m \mathbb{ R
Please, try to ask your questions in english because the language of the
list is english. If you do so, most people will help you
Hope it helps
> Gracias
--
http://www.iit.upco.es/~oscar
Look ere ye leap.
-- John Heywood
How can i make the orthographic correction on-line?
with the words bolded or with the specific markers, when there is an
error.
Odat
ncoding: 7bit
> Description: Card for Torben Lund
--
http://www.iit.upco.es/~oscar
You should emulate your heros, but don't carry it too far. Especially
if they are dead.
th fonts, i.e. mathscript ?
What other kind of solutions exist to produce figures with math latex
fonts in eps and pdf format at the same time ?
Thanks in advance for your help and keep up the good work
Best regards
--
http://www.iit.upco.es/~oscar
Law stands mute in the midst of arms.
e
\usepackage{cancel}
and then in math environment
\cancelto{reason_of_cancelation}{whatever_you_need_to_cancel}
There are several commands, look at the package documentation
Hope it helps
>
> Remzi
--
http://www.iit.upco.es/~oscar
No amount of genius can overcome a preoccupation with detail.
-Mensaje original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]En nombre de Herbert
Voss
Enviado el: lunes, 02 de julio de 2001 21:27
Para: Oscar Garcia Poblacion
CC: lyx user
Asunto: Re: chapterbib + lyx (more info)
Oscar Garcia Poblacion wrote:
> 1) Following th
Oscar Garcia Poblacion wrote:
>
> > No. The ".bib" is in the same dir that "master.lyx". I exported
> >"master.lyx" to latex and then I compiled it with "latex master.lyx". If
I
> >remove the [gather] option it seems to work, bu
with "latex master.lyx". If I
>remove the [gather] option it seems to work, but all chapters gets the same
>bibliography. Is'nt there any way to include a bibliography for each
chapter
>directly from lyx?
>
> Thanks for answering that soon
>
>
-Mensaje original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]En nombre de Herbert
Voss
Enviado el: sabado, 30 de junio de 2001 19:41
Para: Oscar Garcia Poblacion
CC: lyx user
Asunto: Re: chapterbib + lyx
Oscar Garcia Poblacion wrote:
>
> I have a master doc that in
before I go insane?
Regards
Oscar
-Mensaje original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]En nombre de Herbert
Voss
Enviado el: lunes, 04 de junio de 2001 21:37
Para: Oscar Garcia Poblacion
CC: LyX Users
Asunto: Re: Exam design package
Oscar Garcia Poblacion wrote:
>
> I have been playing wi
s and one for a class that lyx can
understand? Is there any exam.layout? Is it possible to get an exam.layout
from exam.dtx? ... any way to use lyx and examdesign?
Thanks a lot in advance
Oscar Garcia
Hi All!
I am trying to use CVS keyword expansion with Lyx, so Author, Revision, etc
would be added to the document. I have tryed the simplest thing that came to
my mind, that was just add $Author$ in the doc. It works. CVS expands that
expression to $Author: Oscar$. I would like
y hand is a bit time-comsuming when dealing with 60 page+
> documents.
Have you tried http://members.home.net/setlur/rtf2latex2e ?
> Shawn
>
> --
> Mitakuye Oyasin
> --
--
http://www.iit.upco.es/~oscar
Today is the first day of the rest of the mess.
y documentation located at:
/usr/share/texmf/doc/latex/draftcopy
>
> Thanks again
>
> Francesco
--
http://www.iit.upco.es/~oscar
Fat Liberation: because a waist is a terrible thing to mind.
ackage[firsttwo]{draftcopy}
if you want to use the firstwo option
>
> Many thanks
>
> Francesco
--
http://www.iit.upco.es/~oscar
A critic is a bundle of biases held loosely together by a sense of
taste.
-- Whitney Balliett
illon ? You can follow
the link provided by Herbert Voss at:
http://www.educat.hu-berlin.de/~voss/lyx/algorithm/algorithm.html
> I am using lyx 1.1.5fix1, document class: article(AMS)
--
http://www.iit.upco.es/~oscar
I used to have a drinking problem. Now I love the stuff.
inition paragraph and its
> actual definition in subsequent stardard paragraphs. I greatly doubt
> this is the way it was intended. How do I do this the right way.
>
> I am using lyx 1.1.5fix1, environment article(AMS)
Hope it helps
--
http://www.iit.upco.es/~oscar
"We'
"Dr. Antonio Botelho de Sousa" wrote:
>
> One more time i need your help. I'm writing a book on medical statistics, and
> my print bureau wants me to send the files in PDF format, with crop marks.
> How can i insert crop marks in the post-script output of a Lyx file?
You can use the crop package
Christopher Jones wrote:
>
> When I cut/copy and paste between documents, the pasted text comes with a blue
> underlining. It doesn't show up in the output, but it is somewhat annoying to
> look at. What is being toggled, so that I can "untoggle" it?
This is because you use different languages b
> Name: test1.dvi
>test1.dvi Type: TeX DVI Data (application/x-dvi)
> Encoding: base64
--
http://www.iit.upco.es/~oscar
Ginsburg's Law:
At the precise moment you take off your shoe in a shoe store, your
big toe will pop out of your sock to see what's going on.
e I missed
something important ? What am i doing wrong ?
Thanks in advance for your help
Oscar
s or write a document layout with
support for a lot of commands that you hardly use it. Is there any
future plan to improve this ?
Thank you for developing lyx and maintaining these really helpful lists.
Oscar
ransitions.inc files in
order to support the capabilities of ppower4. You can find one example,
the layout, and the inc files at
http://www.iit.upco.es/~oscar/download/Presentation.tgz
and the resulting pdf file at
http://www.iit.upco.es/~oscar/download/presentation.pdf
In the tgz file you
x27;ll try to find a solution, sometimes the layouts in lyx can
be a little bit tricky
> Sorry to not have been clear enough.
>
> Andre
--
http://www.iit.upco.es/~oscar
Oh, love is real enough, you will find it some day, but it has one
arch-enemy -- and that is life.
-- Jean Anouilh, "Ardele"
1.5
ParSep1.5
Align Left
AlignPossible Left
LabelString "Grussformel:"
Preamble
\renewcommand{\Anlagenzahl}[1]{#1}
EndPreambl
End
Hope it helps
--
http://www.iit.upco.es/~oscar
Few things are harder to put up with than the annoyance of a good
example.
-- "Mark Twain, Pudd'nhead Wilson's Calendar"
"R. Lahaye" wrote:
>
> Tuukka Toivonen wrote:
> >
> > On Thu, 16 Nov 2000, R. Lahaye wrote:
> >
> > > How can I tell in LyX to make some of my math symbols in color?
> > > For example
> > >
> > >m = 2 * sin(x)
> >
> > if you want red in printed output,
> > I have no idea.
>
> Sorry, I wasn'
UG wrote:
>
> After copying text from another document written in a different language
> (German instead of English) all the inserted text is underlined in blue
> color.
>
> Unfortunately this doesn't always stop where it is supposed to.
>
> What does this feature mean, how can I change it?
>
the right thing)
> \dot \mean{g --> \dot{\mean }{g
>
Of course the same problem appears in the tex file, so this is why I
guessed that there was a problem with \dot
> i.e. the LyX expects a "simple" token after the \dot and cannot handle
> compounds.
>
> I wonder whether this can be changed.
I wonder too,
>
> Guenter
>
Oscar
Herbert Voss wrote:
>
> try
> \newcommand\myDot[1]{\dot{#1}}
> or
> \newcommand\myDotMean[1]{\dot{\mean{#1}}}
>
Thank you very much for your help Herbert.
But I would like to know if there exists a bug with \dot in math mode,
because, yes, I can define other commands to solve the problem, i.e. I
Hi all:
I am trying to get the time derivative of the mean value of a variable.
To
implement the mean value of a variable I defined in the preamble:
\newcommand{\mean}[1]{<#1>}
and in the lyx file I typed:
Alt-m d \dot{\mean{x
The final output in tex is something like that
\[
\dot{{}\mean {
I am sorry I had a problem and the original message was:
===
Hi all
I am sorry if this problem is off topic.
I am trying to translate several word documents to lyx and I use Star
Office to read the word document and th
Hi all
I am sorry if this problem is off topic.
I am trying to translate several word documents to lyx and I use Star
Office to read the word document
--
http://www.iit.upco.es/~oscar
A drama critic is a person who surprises a playwright by informing him
what he meant
serve this behavior with other languages?
What am I doing wrong?
--
Oscar
Alain Castera wrote:
> On Fri, 26 May 2000, Oscar Lopez wrote:
>
> > I am trying something like that
>
> > Style parama
>
> What about :
>
> Style parama
> LatexType Command
> LatexName parama
> Preamble
> \newcommand{\parama}[1]{\de
Alain Castera wrote:
> Style foocommand
> Margin First_Dynamic
> LatexType Command
> LatexName myfoocommand
> Preamble
> \newcommand{\myfoocommand}{\foocommand{\theparama}{\theparamb}{\theparamc}}
> EndPreamble
> ...
> End
>
> You can also do paramc and myfoocommand at once.
>
> Pl
Oscar Lopez wrote:
> I am trying something like that
>
> Style parama
> LatexType Command
..
> LatexType Command
> LatexName foocommand
> LatexParam "{\param1}{\param2}{\p
Jean-Marc Lasgouttes wrote:
> >>>>> "Oscar" == Oscar Lopez <[EMAIL PROTECTED]> writes:
>
> Oscar> Unfortunately this is not the case. Most of the times every
> Oscar> argument represent a field that you have to fill with an
> Oscar> arbitr
Jean-Marc Lasgouttes wrote:
> Oscar> 2. How can I create a style layout for a latex command with,
> Oscar> let's say, five arguments ?. I am trying to write a lyx layout
> Oscar> for a specific cv class, and in this class there are many latex
> Oscar> comman
Hi all lyx-user's
First of all, I would like to say that I am impressive with the new
version of lyx.1.1.5pre3 and I really appreciate all the lyx team
effort.
I have discovered a new feature that I really like it, that is the
possibility of editing and inserted label on the text, I have to say
Herbert Voss wrote:
> ok, here it comes ... not easy, but it's what you want ;-)
> now \mybox{the lyx formula}
> gives a boxed formula with a optimized frame. the value for \parbox in
> \newcommand\myBox ... is no more important, but don't leave it blank,
> latex needs a value. i choose the tex-c
Juergen Vigna wrote:
>
>
> Why not use a 1X1 tabular and put there a mathbox? Well yes it is displayed
> in an own row then, so this might not be what you want, but ... ;)
I am trying to avoid to use the displayed equation, I need to use the \sum,
\int, \frac in the eqnarray environment, and the
Herbert Voss wrote:
> i'm sorry, but this doesn't work ... :-(
> choose this one:
>
> \newcommand{\myBox}[1]{\hspace{1cm}\hfill%
> \fbox{%
> \parbox{5cm}{#1}%
> }%
> \hfill%
> \parbox{0.5cm}{%
> \begin{eqnarray}\end{eqnarray}%
> }
> }
>
Yes, it works, thank you, Herbert,
In
Hi all lyx-user's !
I would like to know how can I boxed an eqnarray environment.
I have used the ams command boxed but it only works with single
equations. I have tried with the fancybox package, with the environment
Beqnarray, but there are two things that it doesn't satisfy me. First of
all,
Hi !
I would like to create a layout for a theorem like environment. I want
to create an Axiom environment but I need to add a title following the
word Axiom, but in a parametric way, such as
3.1 Axiom of local production of entropy. Bla, bla, bla, bla
3.2 Axiom. Bla bla bla
3.3 Axiom of loca
Jean-Marc Lasgouttes wrote:
>
> I do not know what the real mandrake/redhat package names are in this case.
>
> Oscar> So I am afraid that the header files are not installed, I am
> Oscar> not able to find the libstdc++-devel package. Am I looking for
> Oscar> correc
1 - 100 of 105 matches
Mail list logo
