Am Mittwoch, dem 17.07.2024 um 17:46 +0200 schrieb Léo de Souza:
> I would like to report that LyX hangs when copying an inline formula
> containing a thin space in an mbox.
I think this is
https://www.lyx.org/trac/ticket/13069
--
Jürgen
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
http://
Am 15.09.2023 um 15:26 schrieb Jean-Marc Lasgouttes :
>
> Le 15/09/2023 à 13:18, Stephan Witt a écrit :
>>> To me, this looks like this one:
>>> https://www.lyx.org/trac/ticket/12818
>>>
>>> We have a problem on macOS with the interpretation of the return values of
>>> QMessageBox.
>>>
>>> I se
Le 15/09/2023 à 13:18, Stephan Witt a écrit :
To me, this looks like this one:
https://www.lyx.org/trac/ticket/12818
We have a problem on macOS with the interpretation of the return values of
QMessageBox.
I see the patch there is not backported to 2.3.x. Is this normal?
I think it’s not back
Am 15.09.2023 um 11:44 schrieb Jean-Marc Lasgouttes :
>
> Le 15/09/2023 à 11:40, luxhacker a écrit :
>> Hi Pavel,
>> Please create an account for me. I am very interested in LyX.
>> It's difficult to reproduce or seize a problem without knowing anything
>> about it.
>> When looking at the stack,
On Fri, Sep 15, 2023 at 09:40:08AM +, luxhacker wrote:
> Please create an account for me. I am very interested in LyX.
done. p
--
lyx-devel mailing list
lyx-devel@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-devel
Le 15/09/2023 à 11:40, luxhacker a écrit :
Hi Pavel,
Please create an account for me. I am very interested in LyX.
It's difficult to reproduce or seize a problem without knowing anything about
it.
When looking at the stack, I get - perhaps wrongly - the impression it's
user-interface related
Hi Pavel,
Please create an account for me. I am very interested in LyX.
It's difficult to reproduce or seize a problem without knowing anything about
it.
When looking at the stack, I get - perhaps wrongly - the impression it's
user-interface related. Which surprises me a lot.
Could you plea
On Fri, Sep 15, 2023 at 06:39:22AM +, luxhacker wrote:
> New to LyX and appreciating it ! found no way to register. Is this ok ?
> therefore mailing bug report
It's ok. I can create the account if you are interested.
> What I do before ;) ?
>
> Immediately when crashing, I was searching for
On 08/26/2011 12:28 PM, J. van der Boon wrote:
> Dear Developer,
>
>
> I want to report a bug in source: LyX 1.6.5 (2009-12-05), same bug
> occured also in older/newer version of LyX.
>
> When i try 'lyx -e pdf gputils-error.lyx', lyx goes in endless loop
> with same messages over and over:
>
I can wait for the stable 2.0 release...
uhmm
thanks!
2010/6/28 Pavel Sanda :
> Jürgen Spitzmüller wrote:
>> Upgrading to the latest stable version, LyX 1.6.6.1, might improve the
>> situation. Forthcoming LyX 1.6.7 is supposed to cure them completely.
>
> even more correct would be to fil
Jürgen Spitzmüller wrote:
> Upgrading to the latest stable version, LyX 1.6.6.1, might improve the
> situation. Forthcoming LyX 1.6.7 is supposed to cure them completely.
even more correct would be to file bug on ubuntu so the packgagers
ship newer lyx 1.6.6 when the they use qt 4.6. otherwise th
On Mon, Jun 28, 2010 at 7:20 AM, Jürgen Spitzmüller wrote:
> it might eat your
> children etc.
>
2.0 is some new breed of a child-eating monster, I assume :)
Point taken. Regards
Liviu
2010/6/28 Liviu Andronic:
> This is a known incompatibility between LyX and Qt versions, which can
> generate crashes. You can either revert to qt <4.6 or upgrade to LyX
> 2.0 alpha.
Please do not recommend people upgrading to an alpha version! LyX 2.0
is not considered to be ready for production
Hello Murpholino
This is an English ML, so I will answer in English.
On Mon, Jun 28, 2010 at 3:03 AM, Murpholino x wrote:
> Uso Ubuntu 10.04 en una laptop sony vaio VGN-NR220FE
> El problema con Lyx es
[..]
> murpholi...@eva00:~$ lyx --version
> LyX 1.6.5 (2009-12-05)
>
[..]
> Qt 4 Frontend:
Vincent van Ravesteijn - TNW wrote:
> I think this must be solved before releasing 1.6.2.
Any input is highly appreciated. There is some ongoing discussion about the
correct approach between Jean-Marc and myself. I have posted a tentative patch
that will probably solve all these issues (but is o
> > > D:\LyX\lyx-1.6.1\src\CoordCache.cpp(39): break on pointer: 02B6A408
> > > hint: x size: 8
> > > D:\LyX\lyx-1.6.1\src\support\lassert.cpp(21): ASSERTION false
> > > VIOLATED IN D:\LyX\lyx-1.6.1\src\CoordCache.cpp:40
> > > Completed
> > >
> > Could you please elaborate on when this cras
raf...@o2.pl schreef:
Todays sequence of bugs:
D:\LyX\lyx-1.6.1\src\support\filetools.cpp(328): LyX could not create temporary
directory in C:/Documents and Settings/Administrator.NIGDZIE-NIGDZIE/Ustawienia
lokalne/Temp'
Warning: Disk Error:
LyX could
> "Andreas" == Andreas Deininger <[EMAIL PROTECTED]> writes:
Andreas> Take any paragraph (e.g. the first paragraph from the
Andreas> Lyx-Tutorial: "This document is designed to ... use Lyx
Andreas> effectively"). Copy and paste this paragraph in an new
Andreas> document. Put the cursor in fro
> "Andreas" == Andreas Deininger <[EMAIL PROTECTED]> writes:
Andreas> Hi, I eventually found out how to reproduce a bug in Lyx
Andreas> 1.1.6 fix1:
Andreas> If inside a paragraph, move to the beginning of a word.
Andreas> Remove just this word (by typing 'del'-key several times).
Andreas> No
> "Dekel" == Dekel Tsur <[EMAIL PROTECTED]> writes:
Dekel> On Wed, Feb 14, 2001 at 11:31:11AM -0500, Mark van Rossum
Dekel> wrote:
>> Here is the .dep file.
>>
>> Version 1.1.6 does not have the problem.
Dekel> Are you sure ?? (or did you mean 1.1.5?).
>> /home/vrossum/tekst/if_trans/submi
On Wed, Feb 14, 2001 at 11:31:11AM -0500, Mark van Rossum wrote:
> Here is the .dep file.
>
> Version 1.1.6 does not have the problem.
Are you sure ?? (or did you mean 1.1.5?).
> /home/vrossum/tekst/if_trans/submit3//../spikes.eps Graphic file (type ep 0 0
> /home/vrossum/tekst/if_trans/submit3
On Wed, Feb 14, 2001 at 10:03:03AM -0500, Mark van Rossum wrote:
>
> Hi,
>
> I'm using lyx 1.1.6 fix 1 on Linux.
> I find that lyx does not update the dvi preview file, when the lyx file is
> altered. It just displays the old version of the dvi file.
>
> Only restarting lyx will bring a n
On 14 Feb 2001, Jean-Marc Lasgouttes wrote:
> The kde applications I have taken a look at (kedit, control panels) do
> not use these shortcuts. What are the KDE guidelines?
>
> JMarc
I can't track down the KDE 1 style guide :(
But you're right they don't do that. But then KDE 1 at least has ma
> "John" == John Levon <[EMAIL PROTECTED]> writes:
John> I'ts not a weak argument, it's a difficult question. Keyboard
John> control is very important. The approach I've taken in the KDE
John> frontend is :
John> 1) reserve O, A, R, and C for the standard buttons. These are
John> invariant (
> "John" == John Levon <[EMAIL PROTECTED]> writes:
John> On Tue, 13 Feb 2001, Angus Leeming wrote:
>> What happened to a clean, consistent interface that is obvious to
>> non-gurus? We don't use Alt-O for OK.
John> I don't see why not.
An obvious reason for that is that this leaves the Alt-
On Tue, 13 Feb 2001, Lior Silberman wrote:
> One think we should note - the order of the descriptions in form_*.fd is
> significant - that's the order or navigation. In most cases this is
> not the order things appear on screen. I corrected this last week, but
> before I submitted there were sev
On 13 Feb 2001, Lars Gullik Bjønnes wrote:
> John Levon <[EMAIL PROTECTED]> writes:
>
>
> | Everything is additionally navigable through . I suppose xforms
> | doesn't support that.
>
> Sure it does.
>
> Lgb
>
One think we should note - the order of the descriptions in form_*.fd i
On Tuesday 13 February 2001 18:26, John Levon wrote:
> No, I mean it ! Now after working some on the xforms frontend I really do
understand
> what a good idea your heirarchy reworking was. It made things pretty much a
doddle.
I hope to get some time soon to do a bit more with lyx. I'd managed t
John Levon <[EMAIL PROTECTED]> writes:
| On 13 Feb 2001, Lars Gullik Bjønnes wrote:
|
| > John Levon <[EMAIL PROTECTED]> writes:
| >
| >
| > | Everything is additionally navigable through . I suppose xforms
| > | doesn't support that.
| >
| > Sure it does.
| >
| > Lgb
|
| Only edit
On 13 Feb 2001, Lars Gullik Bjønnes wrote:
> John Levon <[EMAIL PROTECTED]> writes:
>
>
> | Everything is additionally navigable through . I suppose xforms
> | doesn't support that.
>
> Sure it does.
>
> Lgb
Only editable text fields and the like. Try the Character dialog.
john
--
John Levon <[EMAIL PROTECTED]> writes:
| Everything is additionally navigable through . I suppose xforms
| doesn't support that.
Sure it does.
Lgb
On Tue, 13 Feb 2001, Angus Leeming wrote:
> > I don't see why not.
>
> Well, ultimately, it frees up the shortcut to use within the form for those
> people that _demand_ that shortcuts be available for anything and everything!
> I know... this is a very weak argument. How do you decide on hous
On Tuesday 13 February 2001 18:01, John Levon wrote:
> On Tue, 13 Feb 2001, Angus Leeming wrote:
>
> > What happened to a clean, consistent interface that is obvious to
non-gurus?
> > We don't use Alt-O for OK.
>
> I don't see why not.
Well, ultimately, it frees up the shortcut to use within
On Tue, 13 Feb 2001, Angus Leeming wrote:
> What happened to a clean, consistent interface that is obvious to non-gurus?
> We don't use Alt-O for OK.
I don't see why not.
> Incidentally, John, and again in the name of consistency, I think that your
> new BibXXX forms should also have an Apply
On Tuesday 13 February 2001 17:27, John Levon wrote:
> My suggested scheme would be :
>
> Return - "default" safe choice - "Cancel" for Print, "Insert" for
FormCitation (it can be undone)
>
> Alt- - for those buttons begininng with "" - this is the
visual feedback one
>
> Esc - for cancel, st
> "Angus" == Angus Leeming <[EMAIL PROTECTED]> writes:
Angus> And for those forms that have a Close, rather than a Cancel
Angus> button? Shall I leave the Return key shortcut or remove that
Angus> also? Incidentally, I see that people have been busy, busy,
Angus> busy in my absence. Wow!
I w
On Tue, 13 Feb 2001, Angus Leeming wrote:
> On Tuesday 13 February 2001 17:07, Jean-Marc Lasgouttes wrote:
> > > "Angus" == Angus Leeming <[EMAIL PROTECTED]> writes:
> >
> > Angus> This is probably my fault! Actually, a quick investigation
> > Angus> revealse that three different shortcuts a
On Tuesday 13 February 2001 17:07, Jean-Marc Lasgouttes wrote:
> > "Angus" == Angus Leeming <[EMAIL PROTECTED]> writes:
>
> Angus> This is probably my fault! Actually, a quick investigation
> Angus> revealse that three different shortcuts are sometimes available
> Angus> for the Cancel button
> "Angus" == Angus Leeming <[EMAIL PROTECTED]> writes:
Angus> This is probably my fault! Actually, a quick investigation
Angus> revealse that three different shortcuts are sometimes available
Angus> for the Cancel button: C Alt-C Esc
Angus> I'd suggest restricting this to Esc only.
Yes, thi
This is probably my fault!
Actually, a quick investigation revealse that three different shortcuts are
sometimes available for the Cancel button:
CAlt-C Esc
I'd suggest restricting this to Esc only.
Thoughts?
Angus
(I'll then do the patch.)
aleem@pneumon:forms-> grep -n Cance
On Tue, 6 Feb 2001, John Levon wrote:
> On Tue, 6 Feb 2001, Andreas Deininger wrote:
>
> > Hi,
> >
> > I eventually found out how to reproduce a bug in Lyx 1.1.6 fix1:
> >
> > If inside a paragraph, move to the beginning of a word. Remove just this
> > word (by typing 'del'-key several times).
On Tue, 6 Feb 2001, Andreas Deininger wrote:
> Hi,
>
> I eventually found out how to reproduce a bug in Lyx 1.1.6 fix1:
>
> If inside a paragraph, move to the beginning of a word. Remove just this
> word (by typing 'del'-key several times). Now there is one blank-character
> in front and one bl
> "Dekel" == Dekel Tsur <[EMAIL PROTECTED]> writes:
Dekel> I've fixed the bug. This is an example that when a char array
Dekel> is used instead of string, bad things will happen...
I applied the patch to 1.1.5cvs too.
JMarc
Dekel Tsur <[EMAIL PROTECTED]> writes:
| I've fixed the bug.
| This is an example that when a char array is used instead of string, bad
| things will happen...
I applied the patch.
Lgb
On Tue, Oct 24, 2000 at 08:15:50PM +0200, Ariel Tankus wrote:
> The bug is very simple to reproduce:
>
> 1. Open a new document.
> 2. Enter math mode (Alt-X math-mode).
> 3. In the math-mode, hold down the `+' key.
> 4. When LyX-1.1.5fix2 crashes, leave the `+' key.
>
> Other keys may do as wel
Martin A Hansen wrote:
>
> hi lyx-devel
>
> i have found a bug.
>
> when inserting a citation reference into a lyx document, the reference in
> the end of the document only have the first letter of the
> reference title with capital letters - all the rest of the capital letters
> in the title a
> "Lars" == Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
Lars> Ok, this is not really hard to avoid. I'll have a look.
Please tell me when you fix it so that I can apply that to 1.1.5fix
also. It would be nice if we could read files with the wrong format
too...
JMarc
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
| > "Andreas" == Andreas Reichel <[EMAIL PROTECTED]> writes:
|
| Andreas> but i think, since version 1.1.5 it has an anoying bug,
| Andreas> because of my poor skills in english-speaking i try to
| Andreas> describe it by an example... please
> "Andreas" == Andreas Reichel <[EMAIL PROTECTED]> writes:
Andreas> but i think, since version 1.1.5 it has an anoying bug,
Andreas> because of my poor skills in english-speaking i try to
Andreas> describe it by an example... please open the attachment file,
Andreas> it is the header of my pr
On 23 Feb 2000, Jean-Marc Lasgouttes wrote:
> > "Henrik" == Henrik Schmidt <[EMAIL PROTECTED]> writes:
>
> Henrik> Platform : Sparc/Solaris 2.6 lyx 1.1.2, xforms 0.88, xpm 4.11
>
> Henrik> Compiled with ./configure without problem. When launching
> Henrik> src/lyx I get
>
> Henrik> "Failed
> "Henrik" == Henrik Schmidt <[EMAIL PROTECTED]> writes:
Henrik> Platform : Sparc/Solaris 2.6 lyx 1.1.2, xforms 0.88, xpm 4.11
Henrik> Compiled with ./configure without problem. When launching
Henrik> src/lyx I get
Henrik> "Failed to share colors. Using private colormap Running
Henrik> with
> "Recai" == Recai Oktas <[EMAIL PROTECTED]> writes:
Recai> This is a bug report.
Recai> Lyx version --- 1.1.3
Recai> Problem description --- Lyx (version 1.1.3)
Recai> crashes while a turkish character key is pressed. (Turkish Q
Recai> keyboard)
Hello,
If you are
On Mon, Dec 20, 1999 at 06:28:56AM -0800, A Rosina Bignall wrote:
>
> I didn't see this on the Known Bugs, or the lyx-devel archive, so I thought
> I'd report it. I'm running lyx from the RPM, so I don't have a build to
> produce a backtrace from, sorry. It seems simple enough to reproduce, b
> "Rosina" == A Rosina Bignall <[EMAIL PROTECTED]> writes:
Rosina> Scenario: Start Lyx. Press a key (I hapened to use "c" since I
Rosina> was trying to type "cd" in an xterm that lyx covered up when
Rosina> it started up). LyX crashes with the following message:
Rosina> lyx: SIGSEGV signal c
On Tue, Nov 23, 1999 at 11:01:07AM +0100, Lars Gullik Bjønnes wrote:
> You can try out the string.patch at
> ftp://ftp.devel.lyx.org/pub/lyx/string.patch it contains all the
> changes made to lyxstring since the release of 1.1.2.
Thanks. This patch fixes it.
Michael
--
Michael Meskes
Michael Meskes <[EMAIL PROTECTED]> writes:
| On Mon, Nov 22, 1999 at 04:23:04PM +0100, Lars Gullik Bjønnes wrote:
| > I think this is fixed in cvs.
|
| Could anyone please tell me if there is a patch for this. I'd like to
| backport the neccessary changes to 1.1.2 so teh Debian package is free o
On Mon, Nov 22, 1999 at 04:23:04PM +0100, Lars Gullik Bjønnes wrote:
> I think this is fixed in cvs.
Could anyone please tell me if there is a patch for this. I'd like to
backport the neccessary changes to 1.1.2 so teh Debian package is free of
this bug.
Michael
--
Michael Meskes
Marc Lehmann <[EMAIL PROTECTED]> writes:
| (gdb) up
| (gdb) p *this
| $1 = {static npos = 4294967295, rep = 0x82ae388}
| (gdb) p fname
| $2 = (string &) @0xbfffef38: {static npos = 4294967295, rep = 0x82ae388}
| (gdb) p *fname.rep
| $4 = {static xtra = , sz = 9, ref = 1, res = 17, s =
| 0x82a
On 16-Oct-99 Russ Ross wrote:
> build today to confirm that the bug happened in the
> latest version. I have xforms V0.89.
So I think this should be the last time I reply to this type of message.
Would someone please put this on the web-page so that people are warned?
+
I recompiled with xforms 0.88 and it worked fine.
I also tried it out under Digital Unix on an Alpha
running lyx-1.0.3 with xforms 0.89 and it worked fine.
So it appears that xforms 0.89 under Linux (glibc 2.1,
elf) is the problem. Anyone else have this problem?
- Russ
--- Lars Gullik Bjønne
Russ Ross <[EMAIL PROTECTED]> writes:
| I compiled lyx with CXXFLAGS='-O2'. I'm running on a
| Mandrake 6.0 Linux installation using pgcc (gcc
| --version gives "pgcc-2.91.66"). I did the 1.0.4
| build today to confirm that the bug happened in the
| latest version. I have xforms V0.89.
Did the
> "Jose" == Jose R Alvarez <[EMAIL PROTECTED]> writes:
Jose> I also get the same error with LyX 1.0.1 from Debian package
Jose> "lyx-1.0.1-1.deb" (it comes from Debian 2.2) on a i386 system
Jose> runing Debian 2.1.
Jose> The error ocurs *only* when using messages in Spanish (don't
Jose> know
Ivan Fernández wrote:
> I think I found a bug in Lyx; I noticed it in 1.0.1, so I downloaded
> 1.0.2pre1 in case it was fixed, but it is still there. Lyx crashes
> whenever I try to use the File|Export feature (export as anything, I
> have tried it with all four options). I compiled it in my RedHa
>> Ivan Fernández writes:
IF> #0 0x80c4c57 in Menus::ShowFileMenu (ob=0x8272bb0) at
IF> LString.h:312 #1 0x4002fbfc in fl_object_qread () #2 0x4003deca
IF> in fl_check_forms () #3 0x8058382 in LyXGUI::runTime
IF> (this=0x825cda8) at lyx_gui.C:629 #4 0x804e1e2 in LyX::LyX
IF> (this=0xb
> "Yves" == Yves Capdeboscq <[EMAIL PROTECTED]> writes:
Yves> Versions 1.7 and 1.8 of insetbib.C does not compile on my
Yves> machines (Sun Solaris 2.6, and Linux 2.0.36), whereas version
Yves> 1.6 works perfectly.
Yves> The error message I get from g++ is the following (for the
Yves> latest
> "Yves" == Yves Capdeboscq <[EMAIL PROTECTED]> writes:
Yves> Sorry, its in the pt.po file.
Yves> the fixed file is attached.
Thanks for the fix. I'll add it to cvs.
JMarc
66 matches
Mail list logo
