I think that David is correct, while you MIGHT be able to get a T-1
"split" as
19 voice ( plus 1 signaling ) and 4 bundled data channels ( 256 K) .
the truth of the matter is that it would require a "special" dsu / csu
that no one would want to do, because of the limited usage.
I have seen a "T"
Speaking on Deep Background, the Press Secretary whispered:
>
> Joe:
>
> You need a device to split the data from the voice channels on the T1. Many
> companies make these. Carrier Access Corporation made one many years ago
> that worked very well. It was called a Datasplit. Adtran also
Joe:
You need a device to split the data from the voice channels on the T1. Many
companies make these. Carrier Access Corporation made one many years ago
that worked very well. It was called a Datasplit. Adtran also makes devices
like these. Basically you need the unit to provide two p
How is the T1 setup as a T1 or a PRI?
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
> Sent: Tuesday, June 20, 2006 8:24 PM
> To: kxt@kxthelp.com
> Subject: KX-T: Need to connect a T1 to a TDA200 using a T1
ginal Message-
From: [EMAIL PROTECTED] [ <mailto:[EMAIL PROTECTED]>
mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Tuesday, June 20, 2006 7:24 PM
To: kxt@kxthelp.com
Subject: KX-T: Need to connect a T1 to a TDA200 using a T1 Card
I have a customer who ordered a T1 and
I have a customer who ordered a T1 and wants me to connect 20 voice lines and
he will use another channel for Data. How do I tell if there is dial tone and
how do I make the connections because some channels are for voice and some
are for data. Any tips on programming would be greatly appreciate
6 matches
Mail list logo
