As far as I know there's gonna have to be a Adtran or some sort of router that the LEC T-1 connects too, then on the back side of the Adtran router will be a data port and one for the T-1 to connect to the TDA200. Normally the LEC provides the Adtran unit.
_____ _____ -----Original Message----- From: [EMAIL PROTECTED] [ <mailto:[EMAIL PROTECTED]> mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, June 20, 2006 7:24 PM To: [email protected] Subject: KX-T: Need to connect a T1 to a TDA200 using a T1 Card I have a customer who ordered a T1 and wants me to connect 20 voice lines and he will use another channel for Data. How do I tell if there is dial tone and how do I make the connections because some channels are for voice and some are for data. Any tips on programming would be greatly appreciated also seeing as I have never done it before. I will be installing a T1 card into the system. Thanks for help _________________________________________________________________ KX-T Mailing list --- <http://kxthelp.com/> http://kxthelp.com/ Subscription changes: <http://kxthelp.com/mailman/listinfo/kxt> http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
