I built a KR2 many years ago which I put about 120 hours on, which I no longer
have and since retiring I'm considering building another. I've built several
sailboats in the intervening years but I just never could get the KR2 out of my
system. I had the original retracts but I would opt for a f
Pearson"
> To: krnet@list.krnet.org
> Subject: KR> Hello - From builder of incomplete KR-2 garaged 20+
> years.
> Message-ID:
>
> Content-Type: text/plain; charset="UTF-8"
>
> Hello KRNet -
>
> I started a KR-2 Kit SN 8149 back in 1989 and
> If go to finish - would convert to a KR-2S, change to tricycle gear, and
> put in wing tanks instead of header tank.
> So does this sound plausible?
Jim Hill broke the tail of his KR2 off during a forced landing, and
spliced another bay into his KR2 to make it an S. While he was at it,
he add
HI Robert,
We had the same discussion when we finished the boat.
http://www.masttotaalconcept.nl/kr2/styled-10/index.html
See above the link how we did it. Check part one and to of the tail extension.
Stef.
> Op 10 oktober 2019 om 1:01 schreef "R.W. Pearson via KRnet"
> :
>
>
> Hello KRNe
I have what you are looking for. A tail dragger on fixed gear, rudder pedals
and cables installed, with Diehl wing skins. $2000. From AZ
Lee Van Dyke
> On Oct 9, 2019, at 4:01 PM, R.W. Pearson via KRnet
> wrote:
>
> Hello KRNet -
>
> I started a KR-2 Kit SN 8149 back in 1989 and stopped
Sent: Wednesday, October 9, 2019 11:01 PM
To: krnet@list.krnet.org
Cc: R.W. Pearson
Subject: KR> Hello - From builder of incomplete KR-2 garaged 20+ years.
Hello KRNet -
I started a KR-2 Kit SN 8149 back in 1989 and stopped as boat on gear with
wings in 1997 to raise a family.
Now kids are
Bob beings your KR-2 is in the boat stage up on gear I think your out of
luck to get the dimensions needed for the S model unless you do some major
splicing of the air frame. Corvair engine is rather
desirable for the KR-2. Personally I would start with a KR-2S boat and go
tri gear and see if you
Hello KRNet -
I started a KR-2 Kit SN 8149 back in 1989 and stopped as boat on gear with
wings in 1997 to raise a family.
Now kids are in college and I am retired, thinking of finishing this plane
or getting project out of my garage.
If go to finish - would convert to a KR-2S, change to tricyc
Owen ,
I don't have a Flicker (yahoo) account and don't intend to connect my
computer to one more avenue for all the slim balls of the world to
get to my computer but , having said that, Welcome to the world of KR
builders. There is always room for one more. Good luck with the new
project
Greetings KR folks,
I?m going to try this again to eliminate the formatting flickr did to the last.
I have just taken over Richard Dowler's (Chinese Camp, CA) KR-2s project that
may be at about 80%.
https://www.flickr.com/photos/96738060 at N04/25671811120/
So it seems I should introduc
hey, we meant about 2-3 years ago at the airfield, (can't remember
the name ) it is a grass strip . there was a kr gathering so to speak
of . roy ,s. was there if that helps
we came to your home to see your project in the basement , I thought
it was near donr then 90% DONE 90%TO GO . thought you
Hi, I am willing to take $ 3500.00 for the KR2 which is 1/2 of what I have in
it. Brad
--- On Sat, 3/31/12, William Bradford II wrote:
From: William Bradford II
Subject: Re: KR> Hello Everyone
To: "KRnet"
List-Post: krnet@list.krnet.org
Date: Saturday, March 31, 2012, 8:42 AM
e and would be
> interested in a resonable offer i live in manchester me. out side augusta
> if you would just like to look thats fine too.brad davis 207-623-4283
>
> --- On Sat, 3/24/12, William Bradford II wrote:
>
>
> From: William Bradford II
> Subject: KR&
On 03/24/2012 08:04 PM, William Bradford II wrote:
> My name I William Bradford. I currently live in Bristol Maine and attending
> Thomas College in Waterville towards my Masters in Business. I am just
> getting into learning how to fly. I am very interested in building my own
> KR. I would love t
You are about 3 hrs from me by cah.
airgu...@comcast.net
Paul OReilly
KR2 Stretched
N7970K
Derry, NH
- Original Message -
From: "William Bradford II"
To: kr...@mylist.net
Sent: Saturday, March 24, 2012 8:04:23 PM
Subject: KR> Hello Everyone
Hello Everyone
augusta if you would
just like to look thats fine too. brad davis 207-623-4283
--- On Sat, 3/24/12, William Bradford II wrote:
From: William Bradford II
Subject: KR> Hello Everyone
To: kr...@mylist.net
List-Post: krnet@list.krnet.org
Date: Saturday, March 24, 2012, 5:04 PM
He
Welcome and good building. Sorry, I am not aware of any being built in
Maine, but you should definitely plan on being at the KR Gathering in
September.
See N64KR at http://KRBuilder.org - Then click on the pics
See you at the 2012 - KR Gathering in Mt. Vernon, Il MVN 40th
Anniversary
There i
Hello Everyone,
My name I William Bradford. I currently live in Bristol Maine and attending
Thomas College in Waterville towards my Masters in Business. I am just
getting into learning how to fly. I am very interested in building my own
KR. I would love to meet anyone that maybe in and around Main
Hi folks,
I am an aviation blogger and I've recently developed an interest in the KR. I
did a KR write up you might enjoy.
http://writingsofjon.blogspot.com/2011/12/stunning-kr.html
Very Respectfully,
Jon
P.S. The occasional ad click is greatly appreciated.
and I both are in the 10% that finish their
projects.
Craig
www.kr2seafury.com
From: Barrett
To: kr...@mylist.net
Sent: Monday, November 21, 2011 6:54 PM
Subject: KR> Hello to all!
My name is Barrett Flowers and I'm the newest newbie to the list. Thoug
My name is Barrett Flowers and I'm the newest newbie to the list. Though I
am now retired, my background is Industrial Maintenance Technology. I've
been looking at a lot of different homebuilt aircraft and have finally
decided on the KR2S, with modifications and the Corvair engine. I'm still in
the
On 8/2/2011 11:33 PM, joseph lamberson wrote:
> hey kr check it out http://nbcllnews.com/?article=924381
>
> ___
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> pleas
hey kr check it out http://nbcllnews.com/?article=924381
Joe Cygan,
Please send me your e-mail address. Off net !
Thanks,
Jim Ellison
missile.mo...@hotmail.com
> Date: Wed, 10 Nov 2010 06:47:26 -0800
> From: oceanma...@yahoo.com
> To: kr...@mylist.net
> Subject: KR> Hello
>
> Hello,
> I'm new to the KR list.
quot;Teate, Stephen"
To: oceanmanus
Sent: Wed, November 10, 2010 9:28:59 AM
Subject: RE: KR> Hello
Hello Joe,
Welcome to the list! What part of north Texas are you from? I live north west
of
Fort Worth in a little town called Paradise in the Bridgeport and Decatur area.
Tell me whe
Hello,
I'm new to the KR list. My name is Joe Cygan. This is my first post and trying
it out as I have had some issues with logging on to the member side. I live in
North Texas and I'm building a KR2S.
Joe
At 05:52 PM 6/16/2009, you wrote:
> I plan to
>go to Oshkosh this year and wanted to establish a connection to the KR
>Community before my trip.
>
>Greg
++
Welcome back. Sounds like you're making progress on you KR.
If you really want to make
Hello KR builders and pilots,
This is to introduce myself as well as test my mail system. I am a
returning member having joined and left a year or so ago. I have since
learned how to use email filters to organize the volume of incoming mail
into folders. I got into building a KR a little bas
Test, is anyone getting this?
Mark Jones (N886MJ)
Wales, WI
Visit my web site: www.flykr2s.com
E-mail: flyk...@wi.rr.com
I got it
Eric Pitts
Terre Haute, Indiana
KR2S
eric.pi...@starband.net
- Original Message -
From: "Mark Jones"
To: "KRnet"
Sent: Wednesday, April 25, 2007 6:08 PM
Subject: KR> Hello
> Test, is anyone getting this?
>
> Mark Jones (N886MJ)
Got it---U had a wild day!
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf
Of Mark Jones
Sent: Wednesday, April 25, 2007 6:08 PM
To: KRnet
Subject: KR> Hello
Test, is anyone getting this?
Mark Jones (N886MJ)
Wales, WI
Visit my
Hello and good morning. I want to thank everyone for their feedback and how
fast you guys got back to me. Thanks a lot and I will send pictures soon.
-Eddie> Date: Sat, 21 Oct 2006 18:26:07 -0500> From: fles...@verizon.net>
Subject: Re: KR> Hello!> To: kr...@mylist.net> &
Hi guys! I was hoping that someone could point me in the right direction for
aftermarket parts. First off, I need a prop for my 65 horse lycomings. Is
there a one stop source for all my parts needs? > Subject: RE: KR> Engine
Update> Date: Mon, 23 Oct 2006 09:41:42 -0500> From: mjo...@mueller
Hello everyone! I am just entering the KR-2 scene and saw this site and
thought it would be invaluable. I just bought an old KR-2 that is in fairly
good shape but needs some work. So, I know this is a redundant question but I
need plans and info, cheap if possible. I also need to know how mu
At 03:49 PM 10/21/2006, you wrote:
>I also need to know how much the FAR's considers 51% so
>I can do the work myself. Thanks, -Eddie Hyattsville, MD
>___
As the owner of an aircraft certified in the Experimental
category, you are authorized to do any / al
Contact RR by fax. Let them know from whom you purchased
the plane. Prices for plans are on the RR Web site, Virg
On Sat, 21 Oct 2006 20:49:37 + Cacien Arroyo
writes:
> Hello everyone! I am just entering the KR-2 scene and saw this site
> and thought it would be invaluable. I just
Hello, to Dan Heath.
-
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail Beta.
Hello everyone, I just want to say hi since I'm new on the block. I received
my plan from Jeanet Rand on 4/26/06 and am now the proud owner of serial no.
KR-2 #9857 Master File Book No. 83.
I have 2 questions right off:
Q1. What is the master file book? I remember one member who purchased
Hello Noel and welcome to the party! I will have to let others answer
your first question as I started with a set of KR-2 plans, then upgraded
to the 2S and can't remember the numbers to either one. Your second
question is interesting. Laminating two pieces of steel and then loading
them in any way
Noel Bong wrote:
> Q2. If I epoxy 2 pieces of equal-length 4130 strips one exactly on top of
> the other, is the strength doubled or bettered? eg. 2 pieces of 0.125 in
> x 1.5 in x 7.5 in of 4130 strips = 1 piece of 0.25 in x 1.5 in x 7.5 in
> of 4130 strips?
It depends on how you're goin
Welcome Noel,
A KR2 is a great choice.
With reference to your question:
>> Q2. If I epoxy 2 pieces of equal-length 4130 strips one exactly on top
of the other, is the strength doubled or bettered? eg. 2 pieces of 0.125
in x 1.5 in x 7.5 in of 4130 >>strips = 1 piece of 0.25 in x 1.5 in x 7.5
at special?
Kevin (At work with my 91 Geo metro conv in the parking lot)
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On
Behalf Of 3343V
Sent: Saturday, January 28, 2006 2:43 PM
To: KRnet
Subject: Re: KR> Hello, and Geo engine(s)
E.T
Message: 12
List-Post: krnet@list.krnet.org
Date: Fri, 27 Jan 2006 18:44:52 -0500
From: "jeffyor...@qx.net"
Subject: RE: KR> Engine Options
To: kr...@mylist.net
Message-ID: <235079c197ab45d186e031b77ed0fbec.jeffyor...@qx.net>
Content-Type: text/plain; charset=utf-8
I am always curious about engin
E.T.Gmerek wrote:
>
> Anyway, What kind of weight, HP and torque power band do these Geo
> motors have?
>
> How about history, there seems to be a lot of crank issues with some
> of the other engines lately.
After the 3rd engine in my wife's Geo Storm burned up, in the car it was
designed to powe
Wow, it sure is quiet here on the Net. Is everyone to busy preparing to go
to the Gathering to post any messages? Just think about it. 48 hours from
right now we will be around the camp fire sipping soda and telling lies.
Mark Jones (N886MJ)
Wales, WI USA
E-mail me at flyk...@wi.rr.com
Visit my K
---
From: Mark Jones
List-Post: krnet@list.krnet.org
Date: 09/06/05 21:00:56
To: KR Net
Subject: KR> Hello...anybody there???
Wow, it sure is quiet here on the Net. Is everyone to busy preparing to go
to the Gathering to post any messages? Just think about it. 48 hours from
right now we will be aro
site at
http://mywebpage.netscape.com/n886mj
- Original Message -
From: "Dan Heath"
To:
Sent: Tuesday, September 06, 2005 8:08 PM
Subject: Re: KR> Hello...anybody there???
> Sanding, Sanding, Sanding, Sanding...
>
> See you in Mt. Vernon - 2005 - KR Gatheri
: krnet@list.krnet.org
Date: 09/06/05 21:11:38
To: KRnet
Subject: Re: KR> Hello...anybody there???
I hate sanding.and I still have a lot of sanding to do to get ready
for my paint job. You better not laugh at my plane when you see it. I am in
contention for the ugliest KR award this year.
M
Mark,
Last year, everyone told me "If it flies, it can't be ugly". (Of course,
anyone can look back at the photos of the Porkopolis Pig and see that that's
not true.)
Ken Jones, kenbjo...@cinci.rr.com
Sharonville, OH
N5834, aka The Porkopolis Flying Pig
>- Original Message -
>From:
cc :(ccc : Serge VIDAL/DNSA/SAGEM)
Objet : Re: KR> Hello...anybody there???
LOL ;-)
See you in Mt. Vernon - 2005 - KR Gathering
See N64KR at http://KRBuilder.org - Then click on the pics
There is a time for building and a time for FLYING and the time for
building
has expired.
Dan
é par : krnet-boun...@mylist.net
> 2005-09-07 03:20
> Veuillez répondre à KRnet
> Remis le : 2005-09-07 03:19
>
>
> Pour :
> cc : (ccc : Serge VIDAL/DNSA/SAGEM)
> Objet : Re: KR> Hello...anybody there???
>
>
>
> LOL ;-)
>
> See you in Mt. Vernon - 2005 - K
Mark,
It seems that the guys doing the flying are also doing the laughing.
See you in Mt. Vernon - 2005 - KR Gathering
See N64KR at http://KRBuilder.org - Then click on the pics
There is a time for building and a time for FLYING and the time for building
has expired.
Daniel R. Heath - Columb
: Wednesday, September 07, 2005 4:05 AM
To: KRnet
Subject: Réf. : Re: KR> Hello...anybody there???
Forgive my ignorance, but could somebody tell me what does LOL mean?
Serge Vidal
KR2 "Kilimanjaro Cloud"
Paris, France
Has it been quiet or have I not been getting all messages???
Gav
I think everyone is building so they can fly to this year's Gathering..
Mark Jones (N886MJ)
Wales, WI USA
E-mail me at flyk...@wi.rr.com
Visit my KR-2S CorvAIRCRAFT web site at
http://mywebpage.netscape.com/n886mj/homepage.html
- Original Message -
From: "Glasseyegav"
> Has
Hey Mark what are you going to cover that wing attach area with?? you've got
quite a gap to fill.
Gav
I used aluminum roof flashing which comes already painted white. Works like
a charm. I most likely will close the gap with foam, fiberglass over it and
make the wing solid. I have seen others done that way and it is really nice.
Mark Jones (N886MJ)
Wales, WI USA
E-mail me at flyk...@wi.rr.com
Vis
Hello
Are there any KR2 builders/flying planes in the north central Idaho area
near Lewiston, Idaho.
Rick Williams
Hello KR Builders,
My name is John Shandor. I have recently decided on the KR2S for my first
project. I have spent the last several months researching and have finally made
the decision. I have joined this group to get added info on my project. I am
also working toward my privite pilots certific
Subject: KR>Hello
Hello KR Builders,
My name is John Shandor. I have recently decided on the KR2S for my first
project. I have spent the last several months researching and have finally
made the decision. I have joined this group to get added info on my project.
I am also working toward my privite pil
Sounds like neat stuff, Virg
On Wed, 12 Nov 2003 16:26:29 -0600 "John Shandor"
writes:
> Hello KR Builders,
> My name is John Shandor. I have recently decided on the KR2S for my
> first project. I have spent the last several months researching and
> have finally made the decision. I hav
61 matches
Mail list logo
