At 05:41 PM 5/8/05 +0200, you wrote:
>I will have to make one or several inspection hatches on my tail section,
>for the following reasons:
__
I included three inspection plates in my tail section. One large
cutout just under the horiz
krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Serge VIDAL
Sent: Sunday, May 08, 2005 11:41 AM
To: kr...@mylist.net
Subject: KR> Inspection hatch, tail section
I will have to make one or several inspection hatches on my tail section,
for the following reasons:
1 - I need t
light, keep it simple, fly it high and fast,
smile.
Best regards
Jim
- Original Message -
From: "Brian Kraut"
To: "KRnet"
Sent: Monday, May 09, 2005 1:49 AM
Subject: RE: KR> Inspection hatch, tail section
>I had an oval shaped one on one side only about 6&qu
répondre à Jim Sellars; Veuillez répondre à KRnet
Remis le : 2005-05-09 14:45
Pour : "KRnet"
cc :(ccc : Serge VIDAL/DNSA/SAGEM)
Objet : Re: KR> Inspection hatch, tail section
Guys:
There is another consideration, if you think that you will need to
rep
I will have to make one or several inspection hatches on my tail section,
for the following reasons:
1 - I need to replace the elevator cables;
2 - I need to remove the tail wheel spring;
3 - I need to be able to inspect the rudder and elevator hinges nuts.
The more I think of it, the more I end
There are two bays back there that you need to get into. I made mine about 4
in diameter. When choosing the size of the hole, think about the area that
will be needed to put a mounting plate back in. Don't cut yourself so close
to the stringers that you don't have room to mount one.
See you in M
krnet-boun...@mylist.net
2005-05-08 18:50
Veuillez répondre à KRnet
Remis le : 2005-05-08 18:50
Pour :
cc :(ccc : Serge VIDAL/DNSA/SAGEM)
Objet : Re: KR> Inspection hatch, tail section
There are two bays back there that you need to get into. I made mine about
4
in d
Long piano hinges on the turtle deck, Virg
On Sun, 8 May 2005 17:41:00 +0200 Serge VIDAL
writes:
> I will have to make one or several inspection hatches on my tail
> section,
> for the following reasons:
> 1 - I need to replace the elevator cables;
> 2 - I need to remove the tail wheel
)
Objet : Re: KR> Inspection hatch, tail section
Long piano hinges on the turtle deck, Virg
On Sun, 8 May 2005 17:41:00 +0200 Serge VIDAL
writes:
> I will have to make one or several inspection hatches on my tail
> section,
> for the following reasons:
> 1 - I need
At 11:41 AM 5/8/2005, you wrote:
>I will have to make one or several inspection hatches on my tail section,
>for the following reasons:
>1 - I need to replace the elevator cables;
>2 - I need to remove the tail wheel spring;
>3 - I need to be able to inspect the rudder and elevator hinges nuts.
I
10 matches
Mail list logo
