Too late for that, Virg. The turle deck was closed very long ago.
Serge
VIRGIL N SALISBURY <virg...@juno.com>
Envoyé par : krnet-boun...@mylist.net
2005-05-08 23:20
Veuillez répondre à KRnet
Remis le : 2005-05-08 23:33
Pour : kr...@mylist.net
cc : (ccc : Serge VIDAL/DNSA/SAGEM)
Objet : Re: KR> Inspection hatch, tail section
Long piano hinges on the turtle deck, Virg
On Sun, 8 May 2005 17:41:00 +0200 Serge VIDAL <serge.vi...@sagem.com>
writes:
> I will have to make one or several inspection hatches on my tail
> section,
> for the following reasons:
> 1 - I need to replace the elevator cables;
> 2 - I need to remove the tail wheel spring;
> 3 - I need to be able to inspect the rudder and elevator hinges
> nuts.
>
> The more I think of it, the more I end up thinking that one large
> hole
> each side will serve my purpose better than three or four tiny ones.
> If I
> make these holes under the horizontal stabilizer, I will probably be
> able
> to do everything except replacing the top elevator cable.
>
> Has anybody been there, done that already?
> How big can I make that hole?
> Where should I drill the hole?
> I was thinking of maybe 120mm (4.75") opening, right in the middle
> of the
> compartment.
>
> Any idea for the top elevator cable?
>
> Serge Vidal
> KR2 "Kilimanjaro Cloud"
> Paris, France
>
>
> _______________________________________
> Search the KRnet Archives at
> http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
>
Virgil N. Salisbury - AMSOIL
www.lubedealer.com/salisbury
Miami ,Fl
_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
