>
>> >> >
>> >> > On Tue, Aug 10, 2021 at 3:52 PM Simon Filgis
>> >> >
>> >> > wrote:
>> >> >
>> >> >> Hi Sir,
>> >> >>
>> >> >> split you problem
gt;> >> Simon
> >> >>
> >> >>
> >> >> On Tue, Aug 10, 2021 at 12:11 PM rushi ghatkar <
> >> rushighatka...@gmail.com>
> >> >> wrote:
> >> >>
> >> >> > Hi Sir,
> >> >>
>>
> >> >> On Tue, Aug 10, 2021 at 12:11 PM rushi ghatkar <
> >> rushighatka...@gmail.com>
> >> >> wrote:
> >> >>
> >> >> > Hi Sir,
> >> >> >
> >> >> > Thanks. Appreciate for your help.
> &
l.com>
>> >> wrote:
>> >>
>> >> > Hi Sir,
>> >> >
>> >> > Thanks. Appreciate for your help.
>> >> >
>> >> > I have flashed your firmware file, nuttx.bin , but still I'm n
>>
>> >> > Hi Sir,
>> >> >
>> >> > Thanks. Appreciate for your help.
>> >> >
>> >> > I have flashed your firmware file, nuttx.bin , but still I'm not
>> >> > getting
>> >> > ns
> firmware worked very well. I thanks to Jonathan very much because on this
> > occasion I learned that changing the toolchain may be a solution sometime
> > and I recently used the same trick in an esp32 project successfully.
> > >>
> > >> There may be a similar toolchain
.
> >>
> >> There may be a similar toolchain mismatch here so I think it would be
> proper if one of maintainers tests my nuttx.bin and his own compiled
> firmware with the present master branch on his Nucleo-H743zi2 board.
> >>
> >> BR,
> >> Mura
lchain mismatch here so I think it would be
> proper if one of maintainers tests my nuttx.bin and his own compiled
> firmware with the present master branch on his Nucleo-H743zi2 board.
> >>
> >> BR,
> >> Murat
> >>
> >> -Original Mess
Hi Brennan,
Thank you very much for your kind replay and help.
BR,
Murat
-Original Message-
From: Brennan Ashton
Sent: Wednesday, August 11, 2021 8:26 AM
To: dev@nuttx.apache.org
Subject: Re: Nuttx RTOS with Nucleo-H743ZI2 board
Ok I verified this is still working correctly.
Here is
oject successfully.
>>
>> There may be a similar toolchain mismatch here so I think it would be proper
>> if one of maintainers tests my nuttx.bin and his own compiled firmware with
>> the present master branch on his Nucleo-H743zi2 board.
>>
>> BR,
>&g
; BR,
> Murat
>
> -Original Message-
> From: Alan Carvalho de Assis
> Sent: Tuesday, August 10, 2021 3:38 PM
> To: dev@nuttx.apache.org
> Subject: Re: Nuttx RTOS with Nucleo-H743ZI2 board
>
> Hi Rushikesh,
>
> I think you are doing the right steps, but just to
.
BR,
Murat
-Original Message-
From: Alan Carvalho de Assis
Sent: Tuesday, August 10, 2021 3:38 PM
To: dev@nuttx.apache.org
Subject: Re: Nuttx RTOS with Nucleo-H743ZI2 board
Hi Rushikesh,
I think you are doing the right steps, but just to confirm:
$ make distclean
$ ./tools/configu
3:29 PM Murat Tologlu
>> > wrote:
>> >
>> > > Hi,
>> > >
>> > > Your nuttx.bin is probably different than the nuttx.bin file which I
>> sent
>> > > to you that's why I configured and compiled an sent to you a new one
>> fo
u still can't get the nsh> prompt with the firmware I
> > sent
> > > to you I don't have any more answer for you. Maybe someone else can
> > > contribute.
> > >
> > > Good luck.
> > >
> > > From: rushi ghatkar
> > > Sent:
more answer for you. Maybe someone else can
> > contribute.
> >
> > Good luck.
> >
> > From: rushi ghatkar
> > Sent: Tuesday, August 10, 2021 12:24 PM
> > To: dev@nuttx.apache.org
> > Subject: Re: Nuttx RTOS with Nucleo-H743ZI2 board
> >
>
ybe someone else can
> contribute.
>
> Good luck.
>
> From: rushi ghatkar
> Sent: Tuesday, August 10, 2021 12:24 PM
> To: dev@nuttx.apache.org
> Subject: Re: Nuttx RTOS with Nucleo-H743ZI2 board
>
>
>
> On Tue, Aug 10, 2021 at 2:52 PM rushi ghatkar <mailto:rush
e someone else can contribute.
Good luck.
From: rushi ghatkar
Sent: Tuesday, August 10, 2021 12:24 PM
To: dev@nuttx.apache.org
Subject: Re: Nuttx RTOS with Nucleo-H743ZI2 board
On Tue, Aug 10, 2021 at 2:52 PM rushi ghatkar
mailto:rushighatka...@gmail.com>> wrote:
Hi Sir,
Thank
rote:
> Hi Rushikesh,
>
>
>
> Flash and try attached firmware ( you may try bin and hex files ) and tell
> us what happens.
>
>
>
> Good luck,
>
> Murat
>
>
>
> *From:* rushi ghatkar
> *Sent:* Tuesday, August 10, 2021 9:42 AM
> *To:* dev@nuttx.
Hi Rushikesh,
If you copy paste and share in a file attachment all the command line content
from "$ cd nuttxspace/nuttx" to the end - not only picocom output " but
everything that you did to configure and compile fooling "a video" ( which
video? ) , perhaps we help can you.
Regards,
Murat
On
On Mon, Aug 9, 2021 at 12:36 AM rushi ghatkar
wrote:
> Hi,
>
> I'm totally new to NUttx RTOS and I have started to work on it. I have a
> Nucleo-H743ZI2 board and followed a youtube video of Nuttx channel to
> configure, compile and flash Nuttx rtos in Nucleo-H743ZI2 board. After
> compilation nu
Hi Rushi,
Unless we know what you are trying to do we can't help you. There may be a
mistake anywhere!
Explain what did you try so far, how ? Give us the links of the application
you're trying.. So may be we can discover your mistake.
Regards,
Murat
On 2021/08/09 04:36:22, rushi ghatkar wrot
21 matches
Mail list logo
