Ok I verified this is still working correctly. Here is a short asciinema of how I flash it using the artifacts generated in CI (same as what you should get from a local build) using a recent build of openocd. In the description there is a short script people might find useful for fetching these artifacts as well.
https://asciinema.org/a/429943 --Brennan On Tue, Aug 10, 2021 at 8:16 PM Brennan Ashton <bash...@brennanashton.com> wrote: > > This board is part of my 30 or so boards I test for releases. I suspect there > is something else up although later tonight I could give it a go. I usually > test via the artifacts that are attached to the CI build job so it is faster > to check and also makes sure there is nothing special about my configuration. > > Some of this testing is automated for sim and for the basic ST boards where I > do not have to set up a debugger. > > --Brennan > > On Tue, Aug 10, 2021, 7:38 PM Murat Tologlu <mtolo...@hotmail.com> wrote: >> >> Hi @acassis >> >> Who is/are responsible for Nucleo-h743zi2 board? >> >> I think, If this is an officially supported board, then there should be at >> least 1 person having this board and testing all the published >> configurations for every release and take the speech at situations like this. >> >> Perhaps you may remember when I started dealing with Nuttx about a year ago >> I had similar problems with running stm32f746g-disco:lvgl configuration and >> I asked help here https://github.com/apache/incubator-nuttx/issues/1643 , I >> couldn't get a help but fortunately Jonathan Gonzaga gave a hint upon my >> question here at LvGL forum >> https://forum.lvgl.io/t/lvgl-nuttx-touch-screen-performance/1498 , I changed >> my arm toolchain (arm-none-eabi-xxx) to a suitable release then my firmware >> worked very well. I thanks to Jonathan very much because on this occasion I >> learned that changing the toolchain may be a solution sometime and I >> recently used the same trick in an esp32 project successfully. >> >> There may be a similar toolchain mismatch here so I think it would be proper >> if one of maintainers tests my nuttx.bin and his own compiled firmware with >> the present master branch on his Nucleo-H743zi2 board. >> >> BR, >> Murat >> >> -----Original Message----- >> From: Alan Carvalho de Assis <acas...@gmail.com> >> Sent: Tuesday, August 10, 2021 3:38 PM >> To: dev@nuttx.apache.org >> Subject: Re: Nuttx RTOS with Nucleo-H743ZI2 board >> >> Hi Rushikesh, >> >> I think you are doing the right steps, but just to confirm: >> >> $ make distclean >> >> $ ./tools/configure.sh nucleo-h743zi2:nsh >> >> $ make menuconfig (this step is optional, just confirm that Device >> Drivers ---> [*] Serial Driver Support ---> Serial console (USART3) is >> correctly defined) >> >> $ make >> >> (flash firmware nuttx.bin in your board: you can use openocd or other tool, >> no problem) >> >> Besides the "nsh>" another indication that NuttX is starting is a solid LED >> turning ON, if it is crashing you should see an LED blinking. >> >> BR, >> >> Alan >> >> On 8/10/21, rushi ghatkar <rushighatka...@gmail.com> wrote: >> > Hi Sir, >> > >> > Thanks for your reply. >> > >> > I have a Nucleo-H743ZI2 board and followed a youtube video of Nuttx >> > channel to configure, compile and flash Nuttx rtos in Nucleo-H743ZI2 board. >> > Youtube Link : >> > https://www.youtube.com/watch?v=heSkSd-_70g&list=PLd73yQk5Fd8JEsVD-lhw >> > YRQKVu6glfDa8&index=1 >> > >> > I did exactly as it is and finally the nuttx.bin file has been created >> > and I have flashed it by using STM32CubeProgrammer. >> > >> > For Nuttx configuration and compilation, I'm using Ubuntu 20.04. >> > Picocom or minicom is not working, so I'm working on it to get it work. >> > >> > But now I have doubts, >> > 1. How to create our own driver? I want to create my own driver like >> > PWM, ADC and for other peripherals, for this where I should start to >> > create? and how?? >> > 2. To create our own driver, where do we have to create it like in >> > Ubuntu or is there any other IDE we can use in ubuntu? >> > 3. After flashing the nuttx.bin file into Nucleo-H743ZI2 board, is it >> > possible to do programming in STM32CubeIDE while the nuttx.bin file is >> > already on board? >> > >> > >> > Thanks & Regards, >> > Rushikesh Ghatkar >> > >> > >> > On Tue, Aug 10, 2021 at 3:52 PM Simon Filgis >> > <si...@ingenieurbuero-filgis.de> >> > wrote: >> > >> >> Hi Sir, >> >> >> >> split you problem: >> >> >> >> Have you verified that you're able to receive data with your PC from >> >> any known working embedded device. >> >> >> >> Best, >> >> >> >> Simon >> >> >> >> >> >> On Tue, Aug 10, 2021 at 12:11 PM rushi ghatkar >> >> <rushighatka...@gmail.com> >> >> wrote: >> >> >> >> > Hi Sir, >> >> > >> >> > Thanks. Appreciate for your help. >> >> > >> >> > I have flashed your firmware file, nuttx.bin , but still I'm not >> >> > getting >> >> > nsh> prompt. >> >> > >> >> > Its ok sir. Thanks for your help. >> >> > >> >> > >> >> > >> >> > Thanks & Regards, >> >> > Rushikesh Ghatkar >> >> > >> >> > On Tue, Aug 10, 2021 at 3:29 PM Murat Tologlu >> >> > <mtolo...@hotmail.com> >> >> > wrote: >> >> > >> >> > > Hi, >> >> > > >> >> > > Your nuttx.bin is probably different than the nuttx.bin file >> >> > > which I >> >> sent >> >> > > to you that's why I configured and compiled an sent to you a new >> >> > > one >> >> for >> >> > > your sake; If you still can't get the nsh> prompt with the >> >> > > firmware I >> >> > sent >> >> > > to you I don't have any more answer for you. Maybe someone else >> >> > > can contribute. >> >> > > >> >> > > Good luck. >> >> > > >> >> > > From: rushi ghatkar <rushighatka...@gmail.com> >> >> > > Sent: Tuesday, August 10, 2021 12:24 PM >> >> > > To: dev@nuttx.apache.org >> >> > > Subject: Re: Nuttx RTOS with Nucleo-H743ZI2 board >> >> > > >> >> > > >> >> > > >> >> > > On Tue, Aug 10, 2021 at 2:52 PM rushi ghatkar < >> >> rushighatka...@gmail.com >> >> > > <mailto:rushighatka...@gmail.com>> wrote: >> >> > > Hi Sir, >> >> > > >> >> > > Thanks for your reply. Really appreciate it. >> >> > > >> >> > > When i configured and compiled nuttx rtos then in my system >> >> > > nuttx.bin >> >> > file >> >> > > was created. And I have flashed that file also. Please find the >> >> > > nuttx directory image attachment. >> >> > > >> >> > > Your firmware file, nuttx bin file I have flashed successfully >> >> > > using STM32CubeProgramer. >> >> > > >> >> > > But the issue is, >> >> > > 1. picocom or minicom is not working. >> >> > > 2. I want to create my own driver like PWM, ADC and for other >> >> > peripherals, >> >> > > for this where I should start to create? and how? >> >> > > >> >> > > >> >> > > Thanks & Regards, >> >> > > Rushikesh Ghatkar >> >> > > >> >> > > >> >> > > >> >> > > >> >> > > On Tue, Aug 10, 2021 at 2:33 PM Murat Tologlu >> >> > > <mtolo...@hotmail.com <mailto:mtolo...@hotmail.com>> wrote: >> >> > > Hi Rushikesh, >> >> > > >> >> > > Flash and try attached firmware ( you may try bin and hex files ) >> >> > > and >> >> > tell >> >> > > us what happens. >> >> > > >> >> > > Good luck, >> >> > > Murat >> >> > > >> >> > > From: rushi ghatkar <rushighatka...@gmail.com<mailto: >> >> > > rushighatka...@gmail.com>> >> >> > > Sent: Tuesday, August 10, 2021 9:42 AM >> >> > > To: dev@nuttx.apache.org<mailto:dev@nuttx.apache.org> >> >> > > Subject: Re: Nuttx RTOS with Nucleo-H743ZI2 board >> >> > > >> >> > > Hi, >> >> > > >> >> > > Thanks for your reply. >> >> > > >> >> > > I have followed this youtube video from Nuttx Channel, >> >> > > >> >> > > >> >> > >> >> https://www.youtube.com/watch?v=heSkSd-_70g&list=PLd73yQk5Fd8JEsVD-lh >> >> wYRQKVu6glfDa8&index=1 >> >> > > >> >> > > From the above link I have followed each step exactly as it is. >> >> > > >> >> > > I'm using Nucleo-H743ZI2 board which has stlink-v3, for this in >> >> > > the >> >> end I >> >> > > was trying to execute command "openocd -f interface/stlink-v3.cfg >> >> > > -f target/stm32h7x.cfg" but this gives error. Please find the >> >> > > error image attachment. >> >> > > As you asked, use STM32CubeProgrammer to flash nuttx.bin into the >> >> > > Nucleo-H743ZI2 board. And I used it and the nuttx.bin file has >> >> > > been >> >> > flashed >> >> > > successfully. >> >> > > >> >> > > After all this I was trying to open the nutshell using picocom, >> >> > > but nothing happened. No nutshell prompt appeared. >> >> > > >> >> > > Please help me to solve this issue. >> >> > > >> >> > > >> >> > > Thanks & Regards, >> >> > > Rushikesh Ghatkar >> >> > > >> >> > > >> >> > > On Tue, Aug 10, 2021 at 11:39 AM murat tologlu >> >> > > <mtolo...@hotmail.com <mailto:mtolo...@hotmail.com>> wrote: >> >> > > Hi Rushikesh, >> >> > > >> >> > > If you copy paste and share in a file attachment all the command >> >> > > line content from "$ cd nuttxspace/nuttx" to the end - not only >> >> > > picocom >> >> > output " >> >> > > but everything that you did to configure and compile fooling "a >> >> > > video" >> >> ( >> >> > > which video? ) , perhaps we help can you. >> >> > > >> >> > > Regards, >> >> > > Murat >> >> > > >> >> > > On 2021/08/10 05:00:36, rushi ghatkar <rushighatka...@gmail.com >> >> <mailto: >> >> > > rushighatka...@gmail.com>> wrote: >> >> > > > Hi, >> >> > > > >> >> > > > I have followed a youtube video from Nuttx Channel to configure >> >> > > > and >> >> > > compile >> >> > > > Nuttx rtos with Nucleo-H743ZI2. And with the help of >> >> > STM32CUbeProgrammer >> >> > > I >> >> > > > have also flashed the nuttx.bin file into the board. >> >> > > > But when I was trying to use minicom or picocom, I'm unable to >> >> > > > use >> >> it. >> >> > > > After executing this command "*sudo picocom /dev/ttyACM0 -b 115200" >> >> *, >> >> > > > nutshell prompt is not appearing, please find the attachment. >> >> > > > Need help for this. >> >> > > > >> >> > > > >> >> > > > Regards, >> >> > > > Rushikesh Ghatkar >> >> > > > >> >> > > > On Mon, Aug 9, 2021 at 8:17 PM murat tologlu >> >> > > > <mtolo...@hotmail.com >> >> > > <mailto:mtolo...@hotmail.com>> wrote: >> >> > > > >> >> > > > > Hi Rushi, >> >> > > > > >> >> > > > > Unless we know what you are trying to do we can't help you. >> >> > > > > There >> >> may >> >> > > be a >> >> > > > > mistake anywhere! >> >> > > > > >> >> > > > > Explain what did you try so far, how ? Give us the links of >> >> > > > > the application you're trying.. So may be we can discover >> >> > > > > your mistake. >> >> > > > > >> >> > > > > Regards, >> >> > > > > Murat >> >> > > > > >> >> > > > > On 2021/08/09 04:36:22, rushi ghatkar >> >> > > > > <rushighatka...@gmail.com >> >> > > <mailto:rushighatka...@gmail.com>> wrote: >> >> > > > > > Hi, >> >> > > > > > >> >> > > > > > I'm totally new to NUttx RTOS and I have started to work on it. >> >> > > > > > I >> >> > > have a >> >> > > > > > Nucleo-H743ZI2 board and followed a youtube video of Nuttx >> >> channel >> >> > to >> >> > > > > > configure, compile and flash Nuttx rtos in Nucleo-H743ZI2 >> >> > > > > > board. >> >> > > After >> >> > > > > > compilation nuttx.bin file has been created but to flash >> >> > > > > > that on >> >> > > board, >> >> > > > > > flash command is not working so I tried STM32CubeProgrammer >> >> > > > > > to >> >> > flash >> >> > > and >> >> > > > > it >> >> > > > > > got flash successfully. >> >> > > > > > But after that "sudo picocom/dev/ttyACM0 -b 115200" , after >> >> > > executing and >> >> > > > > > resetting the board it's just waiting but the nsh> prompt >> >> > > > > > isn't >> >> > > > > appearing. >> >> > > > > > What to do about it? >> >> > > > > > >> >> > > > > > Is there anyone who has worked on Nuttx RTOS with >> >> > > > > > Nucleo-H743ZI2 >> >> > > board >> >> > > > > and >> >> > > > > > can help me with this issue? >> >> > > > > > Please help me to solve this issue. >> >> > > > > > And also I want to create my own driver using nuttx rtos on >> >> > > > > > a >> >> > > > > Nucleo-H73ZI2 >> >> > > > > > board . How to create our own driver and which IDE we have >> >> > > > > > to >> >> use? >> >> > > > > > >> >> > > > > > Please help me. >> >> > > > > > >> >> > > > > > >> >> > > > > > >> >> > > > > > Thanks & Regards, >> >> > > > > > Rushikesh Ghatkar >> >> > > > > > >> >> > > > > >> >> > > > >> >> > > >> >> > >> >> >> >
