Hi
Have anyone successfully installed UT2003 on Debian? I am having a
problem that the install_sh script is detecting floppy disk instead of
cdrom. I tried linking cdrom to fd0. it still does not work. Please
help. I have no problem installing it on Mandrake.
Thanks,
--HNIX
--
To UNSUBSCRIBE
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 07 Jan 2003 2:18 am, suresh kumar sharma wrote:
> Hi,
> I just installed MPlayer on my system
> and it is working fine ,but the audio is a little out
> of sync with video .
> how do I fix it ??
> any help is appreciated
> thanks in advance
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 07 Jan 2003 3:26 am, Trey Sizemore wrote:
> Has anyone installed k3b 0.7.5? Can this be done via apt-get and, if
> so, what is the required entry in sources.list?
>
> Thanks.
You can get version 0.8 (CVS from a day or two ago) from here
d
said Dan Jacobson (on 2003-01-07),
>
> I will try chmod -x /etc/init.d/xdm
> which will only stop X, not like init 1, which stops too much...
> no, indeed it turns out I don't know how to stop X from staring on
> debian. I can't figure it out. If I say 'single' at the boot prompt
> that will
On Tue, 2003-01-07 at 00:10, Mohammed Sameer wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Once upon a time Ron Johnson wrote @ 06 Jan 2003 14:19:13 -0600
>
> > On Mon, 2003-01-06 at 13:44, Jay wrote:
> > > Hello Listies!
> > >
> > > Has anyone ever messed with setting up either G
On Mon, 2003-01-06 at 22:48, Arthur H.
Edwards,1,505-853-6042,505-256-0834 wrote:
> I'm having monumental difficulty getting a new set of PC's working. I
> had been installing a 2.4.19 kernel with debian on a MB with a via chip
> set, and athlon XP2100, a promise ide system. Debian semms to insta
Hi
While I was working on solaris (which in many ways was a terrible
experience), there was one thing I really liked. the output from 'snoop'
was clear and readable. I was wondering if there is a tool in linux that
does the same (or a combination of tools). the only drawback is that it
has to be c
Hello nate,
It works now!! Thanks.
It's caused by my ipchains rule, I was confused with packet that go into internal
network
from the FW server itself. I allowed "FW (unprivport) -> PCAHostInternalIP
(5632/5631)" only,
after I change it to "PCAExternalIP (unprivport) -> PCAHostInternalIP
(5632/
Try to compile and run mplayer - is cool
www.mplayerhq.hu/homepage
On Mon, 6 Jan 2003, Matthew Weier O'Phinney wrote :
» Date: Mon, 6 Jan 2003 12:42:28 -0500
» From: Matthew Weier O'Phinney <[EMAIL PROTECTED]>
» To: [EMAIL PROTECTED]
» Subject: dvd playback problems and questions
» Resent-Date:
On Mon, 2003-01-06 at 22:53, John Griffiths wrote:
> Hello all,
>
> I'm about to attempt a desktop linux trial in my office and
> need some advice on approaches to applicaiton portability.
>
> There are windows apps that are not, at this time optional
> so one way or another I'll have to get th
Hi all!
I installed debian (stable) at home and at my work. Than I upgraded to -testing.
It seems that everything is ok except that when I use the terminal (text console) the
colors work only on tty1. In tty2, tty3, etc... in places where should be a color,
there is a space (maybe black color).
On Tue, 2003-01-07 at 00:37, Stephen Gran wrote:
> This one time, at band camp, [EMAIL PROTECTED] said:
> > Hi,
> >
> > On 30 Nov. 2002 I decided to go for Debian and I still am unable
> > to obtain it. Has it been "ported" to the Alpha architecture?
> > I paid the asking price offered by two of
On Mon, 2003-01-06 at 11:58, Dan Jacobson wrote:
> Dear Debian Sirs, a few months ago I want to town and my friend made
> me 10 cd's: _Sid_ - fsn.hu unofficial i386 Binary (20021010)]
>
> Now if I go to town again can I say, have him use the "jigdo"
> mechanism to make just a few cd's that hold on
On Mon, 2003-01-06 at 22:53, John Griffiths wrote:
> Hello all,
>
> I'm about to attempt a desktop linux trial in my office and
> need some advice on approaches to applicaiton portability.
>
Congrats! :)
> There are windows apps that are not, at this time optional
> so one way or another I'll
Thank you very much for this information. I do find that I like the
latest features of 0.60 and am willing to put up with the instability.
Adam
--- Robin Putters <[EMAIL PROTECTED]> wrote:
> Subject: Re: installing non-"stable" packages and software
> From: Robin Putters <[EMAIL PROTECTED]>
> To
On Sat, Jan 04, 2003 at 11:26:26AM +0100, Burkhard Ritter wrote:
> On Fri, 3 Jan 2003, Egor Tur wrote:
> Perhabs use disown (man bash).
excuse my sense of humour but have you considered the consequences of
telling the list to do 'man bash'? the women might oblige!
hugh
--
To UNSUBSCRIBE, email
On Sat, Jan 04, 2003 at 07:16:40PM +0100, Lukas Ruf wrote:
> * Raymond Gree <[EMAIL PROTECTED]> [2003-01-04 19:11]:
>
> >
> > actually I can directly receive email with exim (without using my
> > internet provider mail server) now I would like to send email again
> > without using my internet prov
On Tue, Jan 07, 2003 at 03:20:20AM -0600, Ron Johnson wrote:
> On Mon, 2003-01-06 at 11:58, Dan Jacobson wrote:
> > Dear Debian Sirs, a few months ago I want to town and my friend made
> > me 10 cd's: _Sid_ - fsn.hu unofficial i386 Binary (20021010)]
> >
> > Now if I go to town again can I say, ha
hello i am using kernel 2.4.20-686u1205-p2-a
and am trying to load linux-wlan-ng modules
these modules were compiled for 2.4.20-pre11-486u1027-sus
would it be possible to alter the version on these modules?
they load fine with insmod -f but not with modprobe. This is a pain as
modprobe is used in
[EMAIL PROTECTED] wrote:
Hi,
can anyone help me to install debian in my windows XP. Should I do
partition, and do I need to get debian software to have half of my
laptop contains of debian and another half of windows XP. can anyone
give me idea is it okay to do partition using magic parti
Hi!
I've been having problems with my second drive (hdd) since everytime I
browse through it pauses on occasion and gives some I/O errors. I
somehow solved it with hdparm:
hdparm -c 1 /dev/hdd
hdparm -d 1 /dev/hdd
hdparm -k 1 /dev/hdd
I'm quite sure the -k option will keep these settings for my h
Hello,
I use XFree86 server from xserver-xfree86 package and it works fine
on a NEC VERSA L320 laptop.
You'll find my /etc/X11/XF86Config-4 file has attached file .
Hope this help.
François
--
lcp
On Mon, Jan 06, 2003 at 09:48:31PM -0700, Arthur H.
Edwards,1,505-853-6042,505-256-0834 wrote:
> Now the program dies with an exit 139, but the system stays up.
>
> What is an exit 139?
139 = 128 + 11 = signal 11 = segmentation fault.
--
Colin Watson [[EMAIL PR
On Tue, Jan 07, 2003 at 03:34:24AM -, rahul i wrote:
> i have installed redhat linux 7.3 in my p3 system with 192mb
> ram.
> i have installed mysql throug the rpm named
> mysql-3.23.49-3.i386.rpm.
> but when i typed mysql from the prompt an error shows like this.
> " mysql:error while loadin
On Sat, Jan 04, 2003 at 09:51:21PM -0500, Fraser Campbell wrote:
> On January 4, 2003 09:20 pm, the fabulous Gerald V. Livingston II wrote:
>
> > Thank you. Took a couple of tries to get the syntax correct but I
> > ended up with this:
> >
> > if [ `ls *.jpg 2>/dev/null|wc -l` -gt 0 ]
> >
> > then
I solved this problem creating a sim link.
ln -s libst... so.2 libst... so.3
this works fine.
[]´s
Iced Sun
- Original Message -
From: "Simon Read" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, January 06, 2003 9:37 PM
Subject: Installing Netscape 7.0 (Solution)
>
> On Mon, 2003-01-06 at 22:53, John Griffiths wrote:
> > Hello all,
> >
> > I'm about to attempt a desktop linux trial in my office and
> > need some advice on approaches to applicaiton portability.
I know I'll get shot for saying this (on this list), but if this is
going to be a desktop trial a
On Tue, Jan 07, 2003 at 10:04:32AM -0200, Gilberto Garcia Jr. wrote:
> From: "Simon Read" <[EMAIL PROTECTED]>
> > The current version of Mozilla crashes for me on a number of web-site
> > (tv.yahoo.com, www.mywashingtonpost.com, &c), so I wanted to try the
> > Netscape 7.0 version. I hit a cou
J.H.M. Dassen (Ray) wrote:
On Mon, Jan 06, 2003 at 07:31:16 -0500, Tom Allison wrote:
OK, I tried to do a dist-upgrade from stable to testing.
rm, ls and all the fileutil goodies got scrapped and cannot be reinstalled
with dpkg (.deb package is on the disk).
That's weird - that upgrade path
If I was using cramd5 password authentication
And I upgraded to libc-client2002
And I wanted to migrate to a non-plain text password scheme?
What are my options?
--
What ever happened to happily ever after?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble
On Tue, 2003-01-07 at 20:22, Robert Storey wrote:
> > On Mon, 2003-01-06 at 22:53, John Griffiths wrote:
> > > Hello all,
> > >
> > > I'm about to attempt a desktop linux trial in my office and
> > > need some advice on approaches to applicaiton portability.
check out wine or winex (for gaming).
On 07 Jan 2003, Elijah wrote:
> Hi!
>
> I've been having problems with my second drive (hdd) since everytime I
> browse through it pauses on occasion and gives some I/O errors. I
> somehow solved it with hdparm:
> hdparm -c 1 /dev/hdd
> hdparm -d 1 /dev/hdd
> hdparm -k 1 /dev/hdd
>
> I'm quite su
On Tue, 2003-01-07 at 20:16, Eric Hanchrow wrote:
> > "Elijah" == Elijah <[EMAIL PROTECTED]> writes:
>
> Elijah> Hi! I've been having problems with my second drive (hdd)
> Elijah> since everytime I browse through it pauses on occasion and
> Elijah> gives some I/O errors. I someh
hi, i have a problem, i export with nfs 2 directory on my server, but when i
mount this directory on my client there's an error:
wrong fs type, bad option, bad superblock on MYSERVER:/MYSHARE, or too many
mounted file systems.
My exports file :
/MYSERVER/MYSHARE (rw,insecure)
thanks
--
P
I have a matrox G550 video card, and have XFree86 version 4.2.1. I have
a Dell monitor that accepts analog and digital input. Everything works
fine with analog input, but I was wondering how to use the digital
input. I first tried installing matrox's powerdesk software, which is
supposed to allo
As having great difficulties in setting up a offline
newsreader system for various users on a debian box
I would grately appreciate some guidance.
My intention is to have a systemwide spool directory
where each user on this box may access his beloved
newsgroup he has subscribed to.
Some people re
On Mon, Jan 06, 2003 at 03:50:45PM -0800, HNIX wrote:
> Have anyone successfully installed UT2003 on Debian?
Yep, it installed without a hitch (once I moved the install script to
the HD).
> I am having a problem that the install_sh script is detecting floppy
> disk instead of cdrom.
No idea.
On Mon, Jan 06, 2003 at 11:54:26PM -0500, Matthew Weier O'Phinney wrote:
> -- John <[EMAIL PROTECTED]> wrote
> > I use Ogle; I solved my choppiness by turning on dma:
> >
> > hdparm -q -d1 /dev/hdd(my dvdplayer)
> Doh! I hadn't considered that I could turn on dma for a cd/dvd device!
> That di
Thanks, I'll give this a try and see how it works.
On Tue, 7 Jan 2003 08:04:51 +, "Alan Chandler"
<[EMAIL PROTECTED]> said:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Tuesday 07 Jan 2003 3:26 am, Trey Sizemore wrote:
> > Has anyone installed k3b 0.7.5? Can this be done via apt-
Hi,
I went thru the man pages but couldn't find what i was looking for.
I run testing and unstable, with testing pinned as prime.
Now i want to get something from unstable, licq, so checked
the dependencies and it's quite a list.
But the dependencies do not show to which release they belong...
eit
Hiya,
using the new 2.0.0.2 version and Ive checked the two or three suggestions
at www.postfix.org for this kind of procedure. The first didnt come with a
finish perl-script which is required - im no coder im afraid. The second
used LDAP which is not interesting in this case.
Anyone out there
I've 3 NICs in my current SuSE box which is a 3com Etherlink a Realtek 8xxx
and
a winbound card included, they do work.
Now i like to migrate to Debian (woody) and noticed that in modconf the
realtek
and winbound is not present, the 3com i could load, alternative ne2000 mods
didn't work.
How can
Is there an easy way to switch between screen resolutions when using a GUI like KDE or Gnome?
I'm using Debian 3, stable release.
- Joe
* [EMAIL PROTECTED] <[EMAIL PROTECTED]> [2003-01-07 15:41]:
> using the new 2.0.0.2 version and Ive checked the two or three
> suggestions at www.postfix.org for this kind of procedure. The first
> didnt come with a finish perl-script which is required - im no coder
> im afraid. The second used LD
On Tue, Jan 07, 2003 at 03:18:01PM +0100, willem wrote:
> I went thru the man pages but couldn't find what i was looking for. I
> run testing and unstable, with testing pinned as prime. Now i want to
> get something from unstable, licq, so checked the dependencies and
> it's quite a list. But t
On Tue, Jan 07, 2003 at 02:26:42PM +, Joe Bosak wrote:
> Is there an easy way to switch between screen resolutions when using a GUI like
> KDE or Gnome?
Try gvidm.
--
Jens Kubieziel mailto:[EMAIL PROTECTED]
millihelen, n.:
The amount of beauty requir
Hello,
I have installed the Debian 3.0, which hasn't recognized my NIC
3c905c-TX. Then I download the 3c90x drive, but I am suffering with a
lot of compilation errors. Has somebody tried do that? Has somebody some
idea about my problem?
Thank's
Ariane
--
Ariane Machado Lima <[EMAIL P
Joe Bosak wrote:
>Is there an easy way to switch between screen resolutions when using a GUI like
>KDE or Gnome?
>
>I'm using Debian 3, stable release.
+/- will cycle through the resolutions set in your X config.
--
gt [EMAIL PROTECTED]
If someone tells you---
"I have a sense
Joe Bosak wrote:
Is there an easy way to switch between screen resolutions when using a
GUI like KDE or Gnome?
I'm using Debian 3, stable release.
- Joe
Yes.
Configure your xserver ('dpkg-reconfigure xserver-xfree86') and choose
the desired resolutions. The highest will be default.
In Gnome o
Matthias Krauss wrote:
I've 3 NICs in my current SuSE box which is a 3com Etherlink a Realtek 8xxx
and
a winbound card included, they do work.
Now i like to migrate to Debian (woody) and noticed that in modconf the
realtek
and winbound is not present, the 3com i could load, alternative ne2000 mo
Under the 2.4.19 kernel, it depends on whether the job was spauned using
mpi. If I start it on the node, it does not kill communications. If I
start it from a head node, I can still ping. I have only tried the 2.2
kernel job as a stand-alone. There it exits quite gracefully with exit
139. Do yo
On Tue, 7 Jan 2003, Matthias Krauss wrote:
> I've 3 NICs in my current SuSE box which is a 3com Etherlink a Realtek
> 8xxx and a winbound card included, they do work. Now i like to
> migrate to Debian (woody) and noticed that in modconf the realtek and
> winbound is not present, the 3com i could
Hi Eduard:
I got the errata, and created the floppy with the additional drives, but
still no luck. I am trying these drivers: mptscsih.o, mptbase.o without
arguments, they seem to be what I need from what I see on the errata page:
/lib/modules/2.4.18-bf2.4/kernel/drivers/message/fusion/mptscsih
On Tue, 2003-01-07 at 22:26, Joe Bosak wrote:
> Is there an easy way to switch between screen resolutions when using a GUI like
> KDE or Gnome?
>
> I'm using Debian 3, stable release.
>
>
> - Joe
editing your /etc/X11/XF86Config-4 might help, go to the screens > subsection display
then add yo
This is more a KDE or gnome question then a Debian question however...
In KDE 3.1 you would click on Control Center->peripherals->X Display
This will allow you to change resolution, color depth, and virtual
desktop size. It edits the XF86 Config-4 file for you automatically.
For the chan
* Robert Land ([EMAIL PROTECTED]) wrote:
> As having great difficulties in setting up a offline
> newsreader system for various users on a debian box
> I would grately appreciate some guidance.
>
> My intention is to have a systemwide spool directory
> where each user on this box may access his be
John Griffiths wrote:
Hello all,
I'm about to attempt a desktop linux trial in my office and
need some advice on approaches to applicaiton portability.
There are windows apps that are not, at this time optional
so one way or another I'll have to get them to go, or stay off
the linux desktop.
Hello,
I do have k3b 0.7.5 installed however I installed it from the source. The
website recommends that to be the best way to install it. I know there are
rpm's available that come with Suse and I think the website has rpms too, not
sure of debs though.
I would recommend you install from sou
Hi,
I'm trying to install drivers for the nforce chip, for audio, OHCI USB
and ethernet. I've downloaded the tar file for drivers from the nVidia
website. After tar xvzf, I enter the created directory and run make
which stops with the following error:
make -C nvnet
make[1]: Entering director
I finally got it working by installing dhcp using apt-get then modifying
the /etc/init.d/dhcp file. I using dhcpcd, the client, and it don't
install any dhcpcd or dhcp file in the /etc/init.d directory. After
renaming all the rc*.d files and have them link to the new
/ect/init.d/dhcpcd file I del
Ariane Machado Lima wrote:
Hello,
I have installed the Debian 3.0, which hasn't recognized my NIC
3c905c-TX. Then I download the 3c90x drive, but I am suffering with a
lot of compilation errors. Has somebody tried do that? Has somebody some
idea about my problem?
Thank's
Ari
In the initial stages of trying to get this working I did this and it
didn't work. I had to setup a file in /etc/init.d/ then have it start
on boot up. I don't know why it didn't work, maybe the dhcp client
program wasn't running at the time the interfaces came up.
Thanks for our suggestion.
Hi i try to use a errata-floppy (from woody-errata web site) for load a module
for my SCSI adapter (LSI LOGIC 21320) but when i load a modules, the machine
don't load module and appear a error: load failed
Help me please
--
Paolo Ghidini
HEROFLON Srl
--
To UNSUBSCRIBE, email to [EMAIL PROTECT
Trying to use pilot-xfer -b visor/ to backup my Visor. It starts off fine but
fails after a few files. xconsole output is as follows:
Jan 7 15:29:24 awayteam kernel: hub.c: USB new device connect on bus1/1, assigned
device number 9
Jan 7 15:29:24 awayteam kernel: usbserial.c: Handspring Visor c
Hi,
I updated my woody gnome1.4 to gnome2.0 yesterday, and I change kdm to
gdm. When I login to gnome2, gnome2 is mixed with fvwm2, gnome2 is just
one of 9 windows of fvwm. And every time I login, I need locate two
panels. How can I use full gnome2 without other window manager?
Since I am not on
I apologize for the repost, but I'm stuck and I'm optimistic that this
is the right place to beg for assistance. I have gathered some
additional information, though.
I'm using Sarge on an i810. Though I've used kpkg to recompile the
kernel, everything else is installed with apt-get.
After in
-- Jamin W. Collins <[EMAIL PROTECTED]> wrote
(on Tuesday, 07 January 2003, 07:21 AM -0600):
> On Mon, Jan 06, 2003 at 11:54:26PM -0500, Matthew Weier O'Phinney wrote:
> > -- John <[EMAIL PROTECTED]> wrote
> > > I use Ogle; I solved my choppiness by turning on dma:
> > >
> > > hdparm -q -d1 /dev/h
Nori Heikkinen wrote:
on Sat, 04 Jan 2003 05:19:39PM -0500, Derrick 'dman' Hudson insinuated:
A better solution is to edit /etc/dhclient.conf. Use one of
append search foo.example bar.example
prepend search foo.example bar.example
depending on the effect you want.
okay, i've been tryin
I have recently installed the Debian ALSA 0.90rc6 packages from Debian
Testing for the 2.4.19-k7 kernel. Everything seems to be working fine,
but I get a message on startup about "no sound cards defined". I do get
sound out of the CDROM, and all other sound sources (except midi) that I
have o
On Tue, 2003-01-07 at 04:31, Elijah wrote:
> Hi!
>
> I've been having problems with my second drive (hdd) since everytime I
> browse through it pauses on occasion and gives some I/O errors. I
> somehow solved it with hdparm:
> hdparm -c 1 /dev/hdd
> hdparm -d 1 /dev/hdd
> hdparm -k 1 /dev/hdd
>
>
you could look at procmail and vacation, just search the apt archive.
/ernst
On Tue, 7 Jan 2003, [EMAIL PROTECTED] wrote:
> Hiya,
>
> using the new 2.0.0.2 version and Ive checked the two or three suggestions
> at www.postfix.org for this kind of procedure. The first didnt come with a
> finish
On Tue, 2003-01-07 at 09:25, Arthur H.
Edwards,1,505-853-6042,505-256-0834 wrote:
> Under the 2.4.19 kernel, it depends on whether the job was spauned using
> mpi. If I start it on the node, it does not kill communications. If I
> start it from a head node, I can still ping. I have only tried the
On Mon, Jan 06, 2003 at 03:36:20PM -0800, Bill Moseley wrote:
> On Mon, 6 Jan 2003, will trillich wrote:
> > my @c = map {s/(.)/$1$1/g; $_} qw(fc0 066 ffc 600 cff 090 ccc 666 fc9 633 cff
>096 c9c 090);
> >
> > under potato, there was no problem. with woody, i've got
> >
> > "Modification
On Mon, Jan 06, 2003 at 06:21:07PM -0500, Richard Cobbe wrote:
> Lo, on Monday, January 6, will trillich did write:
>
>
>
> >From /etc/X11/app-defaults/XTerm-color:
> > > *mainMenu*backgroundPixmap:
> > > gradient:vertical?dimension=350&start=gray90&end=gray60
> > > *mainMenu*foreground:
After installing several dictionaries mode of
/etc/openoffice/dictionary.lst was changed to 0600. I think mode should
be 0644.
--
Hans Gubitz <[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Tue, 2003-01-07 at 09:57, Ariane Machado Lima wrote:
> Hello,
>
> I have installed the Debian 3.0, which hasn't recognized my NIC
> 3c905c-TX. Then I download the 3c90x drive, but I am suffering with a
> lot of compilation errors. Has somebody tried do that? Has somebody some
>
Ok everyone I am back, with a problem on burning a CD...
All though I did finally burn one, but when I looked at the CD it did
not have all of the subdirectorys for which I need...
So with, that I used a new CD, now I have been having one heck of a time
trying to burn another one, using Xcdroast
On Tue, Jan 07, 2003 at 12:57:30PM -0200, Ariane Machado Lima wrote:
>
> Hello,
>
> I have installed the Debian 3.0, which hasn't recognized my NIC
> 3c905c-TX. Then I download the 3c90x drive, but I am suffering with a
> lot of compilation errors. Has somebody tried do that? Has so
On Mon, Jan 06, 2003 at 11:40:08PM -0200, andrej hocevar wrote:
> I've been playing around with these two REs in Perl with no
> success. Can anyone tell me what's wrong?
>
> This works:
> !~ /^(?:red|blue)$/
$var !~ // ==> var as no match for expression
/^$/ ==> match expression
On Sun, 5 Jan 2003 19:08:00 -0800,
Paul Johnson wrote:
>
> [1 ]
> On Mon, Jan 06, 2003 at 06:29:39AM +0800, [EMAIL PROTECTED] wrote:
> > I forgot the "apt-get source" line.
>
> I didn't!
>
> deb http://marillat.free.fr stable main
> deb http://marillat.free.fr unstable main
[...]
I was talki
On Mon, 6 Jan 2003 15:31:24 -0500,
Matthew Weier O'Phinney wrote:
>
> -- Jamin W. Collins <[EMAIL PROTECTED]> wrote
> (on Monday, 06 January 2003, 01:57 PM -0600):
> > On Mon, Jan 06, 2003 at 12:42:28PM -0500, Matthew Weier O'Phinney wrote:
> >
> > > What dvd playing software are other debian use
(I apologize for the off-topic post but I know there are LaTeX users
around and this is a bit of an emergency.)
Help! I haven't used the seminar package for a year or so; now, when
creating the slides for a class lecture tomorrow, suddenly all slides
come out upside-down. This happens with using l
Thank you for your help. I found your "Debian Reference" invaluable.
I tried downgrading my system back to stable but ran into some problems
with dselect complaining about dependencies on non-existent packages
(no way out but Ctrl-C) so I just wiped the system and did a new
install (I was going to
We have recently had similar behavior. However, we found that even
though the we received installation failed messages, it actually worked.
During the device driver configuration step, are you also installoing
pci-scan? When I did this on a recent install, the apparent failure
vanished.
Art Edward
Robert Land wrote:
> As having great difficulties in setting up a offline
> newsreader system for various users on a debian box
> I would grately appreciate some guidance.
> Having the replication of a few newsgroups in mind (< 12)
> and to install a local newserver apt-cache suggested:
>
> + le
begin Ron Johnson quote on Mon, Jan 06, 2003 at 10:45:30PM -0600:
> Is "20" a magic number? I've got kernel pids up to 124 (not including
> nfs-related pids.
No magic numbers (except for init always being PID 1). Kernel threads
just tend to start early in the boot process and stay around for th
Hi,
I compiled a kernel module from source. It intalled in
/lib/modules//comedi/comedi .
I then ran update-modules. I added comedi and ni_mio_cs into /etc/modules. When I boot the system
complains that it can't find modules comedi and ni_mio_cs even though they
are there /comedi/comedi/co
dear sir/madam,
greetings,
i am iraqi nationalty ,i had submeted to refugee status in UNHCR here
(in jordan kingdom)since more than 4 years ,and i had got a rejections some
times .then i appealed my claim more than 3 times with so much indicaters
and evedences but i had got finally rejections ,now
-- [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote
(on Tuesday, 07 January 2003, 05:35 PM +0800):
> On Mon, 6 Jan 2003 15:31:24 -0500,
> Matthew Weier O'Phinney wrote:
> >
> > -- Jamin W. Collins <[EMAIL PROTECTED]> wrote
> > (on Monday, 06 January 2003, 01:57 PM -0600):
> > > On Mon, Jan 06, 2003 at
On Tue, Jan 07, 2003 at 03:46:53PM +, Tim wrote:
> I'm trying to install drivers for the nforce chip, for audio, OHCI USB
> and ethernet. I've downloaded the tar file for drivers from the nVidia
> website. After tar xvzf, I enter the created directory and run make
> which stops with the fo
(reposted)
Hi,
I'm trying to install drivers for the nforce chip, for audio, OHCI USB
and ethernet. I've downloaded the tar file for drivers from the nVidia
website. After tar xvzf, I enter the created directory and run make
which stops with the following error:
make -C nvnet
make[1]: Entering
-BEGIN PGP SIGNED MESSAGE-
I run a mix of sid/sarge/woody/+KDE3. I recently did a "apt-get
update" and got the following error:
E: Dynamic MMap ran out of room
E: Error occured while processing gnome-applets (NewVersion1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package lis
I seem to be having problems getting the nms-textcounter cgi script to
work. I've copied it to /usr/lib/cgi-bin, edited it appropriately, and
added the line "" as the
readme suggests.
I tried going directly to the script, by typing in the url
http://my.host.domain/cgi-bin/script.pl and noticed it
Hello,
I'm looking for a good graphical planner.
Any idea ?
Thanks a lot
François
msg22898/pgp0.pgp
Description: PGP signature
I am using the woody release of CVS and I have two quick questions
regarding setup.
Is there a way to disable CVS using the "Attic"? When files are
removed, I wish they would be deleted instead of moved.
How can I enable a nightly tar/compress of the entire cvsroot?
Thanks in advance.
--
:wq
×ð¾´µÄÅóÓÑ: ÄúºÃ!
¡ï¡ã¡à¡ã¡ã¡à ¡î¡ã£®¡¤¡ï¡ã¡à¡ã£®
¨¨¨¨´º½Ú¾ÍÒªÀ´ÁÙÁËŶ~
¨¡ï¨ ¨¡ï¨
¨¡ö¡ö¨¨¡ö¡ö¨ £®¡¤¡ã¡à¡ï¡ã£®¡ã¡à¡ã£®¡î¡ã £®¡¤¡ã
¨¡ö¡ö¡ö¨ ¨¡ö¡ö¡ö¨ ×£Äú´º½Ú¿ìÀÖ£¡
¦ñ¦ñ||¦ñ¦ñ!!¦ñ¦ñ||¦ñ¦ñ¡ã£®¡ã¡ï £®¡¤¡ã¡à¡ã¡ã£®¡ï¡î
¸ÐлÄúÒ»Ö±ÒÔÀ´
hi ya tim
On Tue, 7 Jan 2003, Tim wrote:
> I'm trying to install drivers for the nforce chip, for audio, OHCI USB
> and ethernet. I've downloaded the tar file for drivers from the nVidia
> website. After tar xvzf, I enter the created directory and run make
> which stops with the following erro
On Tue, Jan 07, 2003 at 05:20:36PM +, Tim wrote:
> (reposted)
[...]
> cc1: Invalid option `-falign-functions=4'
I posted a reply to this earlier. If you're not subscribed to the list,
you may want to check the archives.
Regards,
--
Colin Watson [[EMAIL PROTE
On Tue, 2003-01-07 at 11:02, Jianbo Wang wrote:
> Hi,
>
> I updated my woody gnome1.4 to gnome2.0 yesterday, and I change kdm to
> gdm. When I login to gnome2, gnome2 is mixed with fvwm2, gnome2 is just
> one of 9 windows of fvwm. And every time I login, I need locate two
> panels. How can I use
Kent West wrote:
John Griffiths wrote:
I'm about to attempt a desktop linux trial in my office and need some
advice on approaches to applicaiton portability.
There are windows apps that are not, at this time optional so one way
or another I'll have to get them to go, or stay off the linux de
1 - 100 of 181 matches
Mail list logo
