On Wed, 17 Jul 2024 13:55:55 +0200
Daniel Schröter wrote:
Hello Daniel,
>thanks for this information. Sounds more then similar ;-)
:-)
Thought so.
I implemented the fix here, and can confirm hplip is up and running
again.
Good luck.
--
Regards _ "Valid sig separator
Hello Brad,
thanks for this information. Sounds more then similar ;-)
I'm going to close my bug report
Bye
On Tue, 16 Jul 2024 11:01:30 +0200
Daniel Schröter wrote:
Hello Daniel,
>
>I opened a bug report but didn't get an answer.
>https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1076210
>
>Someone has a workaround?
See;
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1075760
Which is very simil
4})(.*)""",
re.IGNORECASE)
Traceback (most recent call last):
File "/usr/bin/hp-check", line 38, in
from base.g import *
File "/usr/share/hplip/base/g.py", line 239, in
sys_conf = SysConfig()
^^^
File "/usr/share/hplip/base
> pdf. Also the quality of the scan with xsane is as poor as gscan2pdf. There
> must be something in HPLIP that makes better scans.
IIUC the scanning is done by the same library in the end, so it *should*
be possible to get the same quality with any tool. Maybe instead of the
resolution yo
A few weeks ago, I installed Debian 11 on a Dell Vosotro-200 belonging
to a friend. I installed the hplip package and used hp-setup, which
successfully got an old HP ink jet printer working on the system.
The friend also has a Dell Optiplex 330, on which I installed Debian
11 a few months ago
On Wed, 5 Apr 2023 17:24:09 +0200
Christoph Brinkhaus wrote:
Hello Christoph,
>I have run hp-check just for curiosity. It reports a lot of missing
>stuff.
You need to read the output carefully; Much of that missing stuff may
well be related to build environment only. If you installed
n. I tried
> several other versions from the repository, both debian and generic versions
> each built with different configs. No luck. The very latest hplip version
> added to the repo this week doesn't give the 'wrong debian version' notice
> during the configura
Christoph, thanks for the reply. Autoremove was run successfully. The
bullseye version was installed with no errors but wouldn't run. I tried
several other versions from the repository, both debian and generic versions
each built with different configs. No luck. The very latest
Am Tue, Apr 04, 2023 at 05:08:29PM -0600 schrieb tony mollica:
Hi Tony,
> Here's the deal! I've upgraded from buster to bullseye with no real issues,
> overall, with the exception of only one app so far. hplip didn't run after
> the upgrade and I've uninstalled an
Here's the deal! I've upgraded from buster to bullseye with no real issues,
overall, with the exception of only one app so far. hplip didn't run after the
upgrade and I've uninstalled and re-installed hplip from the bullseye repo and
it does install but doesn't
Le 24/02/2023 à 18:41, Brian a écrit :
On Fri 24 Feb 2023 at 18:25:24 +0100, Erwan David wrote:
Le 24/02/2023 à 17:45, Brian a écrit :
On Wed 22 Feb 2023 at 17:49:13 +0100, Erwan David wrote:
Hi,
hplip seems to need a dependency, many commands end with
File "/usr/share/hplip
Le 24/02/2023 à 17:45, Brian a écrit :
On Wed 22 Feb 2023 at 17:49:13 +0100, Erwan David wrote:
Hi,
hplip seems to need a dependency, many commands end with
File "/usr/share/hplip/base/password.py", line 119, in __readAuthType
distro_name = get_distro_std_na
Le 22/02/2023 à 18:46, Celejar a écrit :
On Wed, 22 Feb 2023 17:49:13 +0100
Erwan David wrote:
Hi,
hplip seems to need a dependency, many commands end with
File "/usr/share/hplip/base/password.py", line 119, in __readAuthType
distro_name = get_distro_std_na
On Wed, 22 Feb 2023 17:49:13 +0100
Erwan David wrote:
Hello Erwan,
>I opend a bug for a missing dependency, but do someone know of a
>workaround ?
Further to Celejar's response, I can confirm that editing password.py as
suggested in the bug report he mentions, does indeed work.
--
Regards
On Wed, 22 Feb 2023 17:49:13 +0100
Erwan David wrote:
> Hi,
>
> hplip seems to need a dependency, many commands end with
>
> File "/usr/share/hplip/base/password.py", line 119, in __readAuthType
> distro_name =
Hi,
hplip seems to need a dependency, many commands end with
File "/usr/share/hplip/base/password.py", line 119, in __readAuthType
distro_name = get_distro_std_name(os_name)
^^^
NameError: name 'get_distro_std_name' is not d
06.03.20, 10:33 CET Markus Schönhaber:
> 04.03.20, 14:44 CET Brad Rogers:
>
>> Is anybody else having issues with hplip 3.20.0?
> There might be an upstream issue with hplip 3.20.
According to this comment
https://bugs.launchpad.net/hplip/+bug/1866291/comments/6
to the bug repor
On Fri, 6 Mar 2020 13:01:39 - (UTC)
Curt wrote:
Hello Curt,
>https://bugs.archlinux.org/task/65697
>The above might be related (Andreas thinks so anyway).
Certainly bears a striking similarity. I'll add the info to the Debian
bug report.
Thanks for the info, Curt.
--
Regards _
On 2020-03-06, Brad Rogers wrote:
>
>>I'm on Arch and since the upgrade of hplip to 3.20.2 I was unable to
>>print. My MFP 377dw spit out multiple pages - some blank, some showing a
>>line or two of gibberish - when trying to print something.
> Different sympt
On Fri, 6 Mar 2020 10:33:56 +0100
Markus Schönhaber wrote:
Hello Markus,
>There might be an upstream issue with hplip 3.20.
At the time I searched, I saw no mention of problems. That was several
days ago now, and I confess to not having searched again since.
>I'm on Arch an
04.03.20, 14:44 CET Brad Rogers:
> Is anybody else having issues with hplip 3.20.0?
There might be an upstream issue with hplip 3.20.
I'm on Arch and since the upgrade of hplip to 3.20.2 I was unable to
print. My MFP 377dw spit out multiple pages - some blank, some showing a
line o
On Thu, 5 Mar 2020 17:59:34 +
Brian wrote:
Hello Brian,
>> >I can think of no other troubleshooting to do, although I suppose you
>> >could backup /usr/lib/cups/backend/hp and replace it with the 3.19.12
>> Just tried that, and still nothing printed. Reverted the change.
>Further confirma
On Thu, Mar 05, 2020 at 04:45:32PM +, Brad Rogers wrote:
> On Thu, 5 Mar 2020 15:28:00 +
> Brian wrote:
>
> Hello Brian,
>
> >I can think of no other troubleshooting to do, although I suppose you
> >could backup /usr/lib/cups/backend/hp and replace it with the 3.19.12
> >one.
>
> Just t
Brad Rogers wrote:
> The reason for Brian patiently walking me through some diagnostics is
> because he's involved with the dev team. At least I think he is. Either
> way, he clearly knows his stuff, and managed to demotrate that;
>
> a) the printer is fine
> b) cabling is good
> c) networking i
On Thu, 5 Mar 2020 12:05:50 -0500
songbird wrote:
Hello songbird,
>just on the off-chance, have you completely removed/purged
>cups and related packages as much as possible and then
>reinstalled from scratch again?
No, I haven't. Frankly, it makes me feel weak to even think about doing
so. I
Brad Rogers wrote:
...
just on the off-chance, have you completely removed/purged
cups and related packages as much as possible and then
reinstalled from scratch again?
i know this sort of thing isn't really often the kind
of way to figure out what is going on, but sometimes it
just fixes what
On Thu, 5 Mar 2020 15:28:00 +
Brian wrote:
Hello Brian,
>I can think of no other troubleshooting to do, although I suppose you
>could backup /usr/lib/cups/backend/hp and replace it with the 3.19.12
>one.
Just tried that, and still nothing printed. Reverted the change.
>This URI should giv
On Thu, Mar 05, 2020 at 12:38:12PM +, Brad Rogers wrote:
> On Thu, 5 Mar 2020 12:23:02 +
> Brian wrote:
>
> device for Officejet_6700: hp:/net/Officejet_6700?ip=192.168.1.53
I see nothing wrong with this URI, so, until we know better, I'll take
it that the bug is in the hp backend.
I ca
On Thu, 5 Mar 2020 12:23:02 +
Brian wrote:
Hello Brian,
>That looks like a failure in the backend, doesn't it? The outputs of the
Err, I'll say "yes"? :-)
>two commands asked for, please.
My apologies.
lpstat -t;
scheduler is running
system default destination: Officejet_6700
device
On Thu, Mar 05, 2020 at 11:45:29AM +, Brad Rogers wrote:
> On Thu, 5 Mar 2020 11:26:43 +
> Brian wrote:
>
> Hello Brian,
>
> > lp -d XXX -o raw out.dat
>
> Output on the command line is;
>
> request id is Officejet_6700-14179 (1 file(s))
>
> However, although the printer receives som
On Thu, 5 Mar 2020 11:26:43 +
Brian wrote:
Hello Brian,
> lp -d XXX -o raw out.dat
Output on the command line is;
request id is Officejet_6700-14179 (1 file(s))
However, although the printer receives something (the control panel
illuminates) nothing is printed.
Looking at the jobs list
On Thu, Mar 05, 2020 at 07:19:43AM +, Brad Rogers wrote:
> On Wed, 4 Mar 2020 23:19:47 +
>
> Okay, substituting 9100 as the port number, the contents of
> /etc/nsswitch.conf were printed.
This eliminates the ethernet cable and the printer part of the issue.
The remaining component of the
as the port number, the contents of
/etc/nsswitch.conf were printed.
>has an open port 9100; most HP printers do. You can check with
>
> nmap YOUR_PRINTER'S_IP_ADDRESS
Given the above, probably not necessary, but output lists a number of
open ports and the services used, including po
inter's
> display doesn't illuminate as it did when trying to print from within
> (say) LibreOffice.
>
> I confirmed the IP address of the printer was correct by copying/pasting
> into a browser and loading the printer's internal web page.
Telling us that helped a lot
r's
display doesn't illuminate as it did when trying to print from within
(say) LibreOffice.
I confirmed the IP address of the printer was correct by copying/pasting
into a browser and loading the printer's internal web page.
HPLIP 3.20.2 is still installed, BTW.
--
Regards _
On Wed, Mar 04, 2020 at 07:37:19PM +, Brad Rogers wrote:
> On Wed, 4 Mar 2020 19:24:02 +
>
> The printer is connected via an ethernet cable to a switch, which is in
> turn connected to the router/modem. The computer is connected to the
> router/modem via ethernet.
>
> Again, thank you fo
On Wed, 4 Mar 2020 19:24:02 +
Brian wrote:
Hello Brian,
>Would you confirm (or otherwise) that the computer you are printing from
>is USB-connected to the printer?
I should have imported the other subthread to here. :-)
The printer is connected via an ethernet cable to a switch, which is
On Wed, Mar 04, 2020 at 06:53:10PM +, Brad Rogers wrote:
> On Wed, 4 Mar 2020 17:12:00 +
> Brian wrote:
>
> Hello Brian,
>
> >isn't quite what I meant by having the printer on the network. I assume
> >the printer is USB-connected to the server. Strictly speaking, it is the
>
> The print
On Wed, Mar 04, 2020 at 07:24:02PM +, Brian wrote:
>
> Would you confirm (or otherwise) that the computer you are printing from
> is USB-connected to the printer?
Forget about that. Got your other post.
--
Brian.
On Wed, Mar 04, 2020 at 06:57:02PM +, Brad Rogers wrote:
> On Wed, 4 Mar 2020 16:29:11 +
> Brian wrote:
>
> Hello Brian,
>
> >It's useful in that it shows a fully functioning filtering system for
> >3.19.12, but a log for 3.20.2 is what is really required.
>
> Attached is the output for
On Wed, 4 Mar 2020 17:12:00 +
Brian wrote:
Hello Brian,
>isn't quite what I meant by having the printer on the network. I assume
>the printer is USB-connected to the server. Strictly speaking, it is the
The printer is connected via ethernet, rather than USB.
>For a useful output, wireless
On Wed, 4 Mar 2020 16:29:11 +
Brian wrote:
Hello Brian,
>It's useful in that it shows a fully functioning filtering system for
>3.19.12, but a log for 3.20.2 is what is really required.
Attached is the output for when 3.20.2 is installed.
AFAICS, the only differences are the order in which
;would be surprising
if it was.
> I'll reiterate that currently, the working (v3.19.12) hplip is
> installed, in case it's relevant.
It wasn't relevant for this.
--
Brian
> --
> Regards _
> / ) "The blindingly obvious is
>
, and your explicitly omitting details about suppressed
> >recommended packages must mean that you have none of that.
>
> I don't routinely install recommended packages. AFAICS, the
> recommends for hplip relate mostly to scanning, rather than printing
> so probab
f > out.dat 2>log
>
> I'll point out that this is with the 3.19.12 (i.e. things working)
> version of hplip installed, so may not be useful.
It's useful in that it shows a fully functioning filtering system for
3.19.12, but a log for 3.20.2 is what is really required.
--
Brian.
On Wed, 4 Mar 2020 15:51:18 +
a...@cityscape.co.uk wrote:
Hello a...@cityscape.co.uk,
>Execute (as root):
>cupsfilter -p /etc/cups/ppd/XXX.ppd -m printer/foo -e
>/etc/nsswitch.conf > out.dat 2>log
I'll point out that this is with the 3.19.12 (i.e. things working)
versio
ppears, so something occurs.
I'll reiterate that currently, the working (v3.19.12) hplip is
installed, in case it's relevant.
--
Regards _
/ ) "The blindingly obvious is
/ _)radnever immediately apparent"
Bet you thought you knew what
On Wed, Mar 04, 2020 at 03:40:57PM +, Brad Rogers wrote:
>
> The printer is an OfficeJet 6700 Premium (an all in one device).
Thanks.
With the 6700 on the network provide what you get for
avahi-browse -rt _ipp._tcp
and
avahi-browse -rt _uscan._tcp
avahi-browse is in the avahi-utils p
On Wed, Mar 04, 2020 at 03:04:07PM +, Brad Rogers wrote:
> On Wed, 04 Mar 2020 15:47:45 +0100
> Jonas Smedegaard wrote:
>
> Should I still go ahead and file a report?
>
> >Thanks for bringing it up here first.
>
> I prefer to ask around first, just in case I'm doing something wrong.
> DD's
On Wed, 4 Mar 2020 15:27:12 +
Brian Potkin wrote:
Hello Brian,
>There are none. The hplip package simply ceases to be a recommends of
>other packages.
Thanks for the info.
>> Should I be removing hplip, for example?
>No. Perhaps. It depends on what your printer
On Wed, Mar 04, 2020 at 02:18:47PM +, Brad Rogers wrote:
> On Wed, 04 Mar 2020 09:03:04 -0500
> The Wanderer wrote:
>
> Hello The,
>
> >I wonder whether this might therefore be the result of a change in cups,
> >rather than in hplip.
>
> Thanks for the
commended packages must mean that you have none of that.
I don't routinely install recommended packages. AFAICS, the
recommends for hplip relate mostly to scanning, rather than printing so
probably not relevant. Of course, I'm no expert.
Should I still go ahead and file a report?
>
Quoting Brad Rogers (2020-03-04 15:18:47)
> On Wed, 04 Mar 2020 09:03:04 -0500
> The Wanderer wrote:
> >I wonder whether this might therefore be the result of a change in
> >cups, rather than in hplip.
>
> Thanks for the pointer. Frankly, I have no idea what the change
Quoting Brad Rogers (2020-03-04 15:20:00)
> On Wed, 04 Mar 2020 15:00:39 +0100
> Jonas Smedegaard wrote:
> >Please mention when you use testing/unstable.
> I'm on testing, and there are no reports at Debian's hplip page. Nor
> can I find reports at the HP hpl
On Wed, 04 Mar 2020 09:03:04 -0500
The Wanderer wrote:
Hello The,
>I wonder whether this might therefore be the result of a change in cups,
>rather than in hplip.
Thanks for the pointer. Frankly, I have no idea what the change in CUPS
means. That is, what are the implications WRT to
On Wed, 04 Mar 2020 15:00:39 +0100
Jonas Smedegaard wrote:
Hello Jonas,
>Please mention when you use testing/unstable.
Of course. Stupid of me; I'm on testing, and there are no reports at
Debian's hplip page. Nor can I find reports at the HP hplip support
site.
On 2020-03-04 at 08:44, Brad Rogers wrote:
> Hello All,
>
> Is anybody else having issues with hplip 3.20.0? The upgrade
> resulted in me not being able to print anything. Jobs were,
> apparently, being sent to the printer (its display panel lit up, to
> indicate that there w
Hi Brad,
Quoting Brad Rogers (2020-03-04 14:44:55)
> Is anybody else having issues with hplip 3.20.0?
Please mention when you use testing/unstable.
When you do use testing/unstable then please check yourself for reported
bugs before asking here.
Also, please mention if you have suppres
On Wed, 4 Mar 2020 13:44:55 +
Brad Rogers wrote:
Hello All,
Mea Culpa - that should be version 3.20.2
All other details remain the same.
--
Regards _
/ ) "The blindingly obvious is
/ _)radnever immediately apparent"
Well well well, you just can't tell
Hello All,
Is anybody else having issues with hplip 3.20.0? The upgrade resulted
in me not being able to print anything. Jobs were, apparently, being
sent to the printer (its display panel lit up, to indicate that there
was something about to happen), but the jobs never completed and
eventually
Luxul
router, open-source-only drivers for everything on the libreboot PCs.
But I've run into a snag with the printer and scanner.
Out of curiosity, why the printer? Is it failing? Ink unavailable?
I was going to make life easy for myself and use hplip with something
like an HP MFP. But all of
On 12/07/2016 02:52 AM, Richard Hector wrote:
On 07/12/16 14:42, Jape Person wrote:
I'll never forget hearing someone trying to prop an early version of
Netscape up by saying that it was a good browser *because* it failed on
badly written pages.
It shouldn't crash, of course, but I think the w
On 07/12/16 14:42, Jape Person wrote:
> I'll never forget hearing someone trying to prop an early version of
> Netscape up by saying that it was a good browser *because* it failed on
> badly written pages.
It shouldn't crash, of course, but I think the web would be a much nicer
place if browsers j
On 12/06/2016 06:50 PM, Lisi Reisz wrote:
On Tuesday 06 December 2016 02:51:33 Jape Person wrote:
Yes, I know I can tell some browsers to give me light text on a dark
background, but that never works as well as the control I have in my
mail client.
Out of interest, which do you use? I need a
On Tuesday 06 December 2016 02:51:33 Jape Person wrote:
> Yes, I know I can tell some browsers to give me light text on a dark
> background, but that never works as well as the control I have in my
> mail client.
Out of interest, which do you use? I need a backup, for when the bit-rot on
the one
On 12/05/2016 07:06 PM, Jape Person wrote:
On 12/05/2016 06:35 PM, Marc Shapiro wrote:
On 12/03/2016 12:36 PM, Jape Person wrote:
On 12/03/2016 03:20 PM, Brian wrote:
On Sat 03 Dec 2016 at 19:20:18 +, Lisi Reisz wrote:
On Saturday 03 December 2016 18:09:50 Jape Person wrote:
Hi,
I'm re
On 12/05/2016 06:35 PM, Marc Shapiro wrote:
On 12/03/2016 12:36 PM, Jape Person wrote:
On 12/03/2016 03:20 PM, Brian wrote:
On Sat 03 Dec 2016 at 19:20:18 +, Lisi Reisz wrote:
On Saturday 03 December 2016 18:09:50 Jape Person wrote:
Hi,
I'm replying to myself at the top of the thread be
On 12/04/2016 01:50 PM, Brian wrote:
On Sat 19 Nov 2016 at 16:14:45 -0500, Jape Person wrote:
On 11/19/2016 02:47 PM, Brian wrote:
You have this one definite requirement and will have to firm up what
else you definitely want. I'll mention the HP OfficeJet Pro 8720
All-in-One Printer. It is re
On 12/04/2016 09:55 AM, rhkra...@gmail.com wrote:
On Sunday, December 04, 2016 06:50:17 AM Lisi Reisz wrote:
On Saturday 03 December 2016 20:14:21 Jape Person wrote:
I
have a horrible time reading this stuff through a browser interface.
Yes, sorry. :-( I have a horrible time with archives be
On 12/03/2016 12:36 PM, Jape Person wrote:
On 12/03/2016 03:20 PM, Brian wrote:
On Sat 03 Dec 2016 at 19:20:18 +, Lisi Reisz wrote:
On Saturday 03 December 2016 18:09:50 Jape Person wrote:
Hi,
I'm replying to myself at the top of the thread because I saw --
out of the corner of my eye --
On Sat 19 Nov 2016 at 16:14:45 -0500, Jape Person wrote:
> On 11/19/2016 02:47 PM, Brian wrote:
> >
> >You have this one definite requirement and will have to firm up what
> >else you definitely want. I'll mention the HP OfficeJet Pro 8720
> >All-in-One Printer. It is relatively inexpensive, deals
On Sunday 04 December 2016 14:55:10 rhkra...@gmail.com wrote:
> On Sunday, December 04, 2016 06:50:17 AM Lisi Reisz wrote:
> > On Saturday 03 December 2016 20:14:21 Jape Person wrote:
> > > I
> > > have a horrible time reading this stuff through a browser interface.
> >
> > Yes, sorry. :-( I have
On Sunday, December 04, 2016 06:50:17 AM Lisi Reisz wrote:
> On Saturday 03 December 2016 20:14:21 Jape Person wrote:
> > I
> > have a horrible time reading this stuff through a browser interface.
>
> Yes, sorry. :-( I have a horrible time with archives being illegible in
> browsers - but I thoug
On Saturday 03 December 2016 20:14:21 Jape Person wrote:
> I
> have a horrible time reading this stuff through a browser interface.
Yes, sorry. :-( I have a horrible time with archives being illegible in
browsers - but I thought that that was a problem restricted to the partially
sighted: the
On 12/03/2016 07:32 PM, Fred wrote:
On 12/03/2016 01:20 PM, Brian wrote:
On Sat 03 Dec 2016 at 19:20:18 +, Lisi Reisz wrote:
On Saturday 03 December 2016 18:09:50 Jape Person wrote:
Hi,
I'm replying to myself at the top of the thread because I saw
-- out of the corner of my eye -- that t
On 12/03/2016 01:20 PM, Brian wrote:
On Sat 03 Dec 2016 at 19:20:18 +, Lisi Reisz wrote:
On Saturday 03 December 2016 18:09:50 Jape Person wrote:
Hi,
I'm replying to myself at the top of the thread because I saw -- out of
the corner of my eye -- that there were two recent additions to the
On 12/03/2016 03:20 PM, Brian wrote:
On Sat 03 Dec 2016 at 19:20:18 +, Lisi Reisz wrote:
On Saturday 03 December 2016 18:09:50 Jape Person wrote:
Hi,
I'm replying to myself at the top of the thread because I saw --
out of the corner of my eye -- that there were two recent
additions to the
On Sat 03 Dec 2016 at 19:20:18 +, Lisi Reisz wrote:
> On Saturday 03 December 2016 18:09:50 Jape Person wrote:
> > Hi,
> >
> > I'm replying to myself at the top of the thread because I saw -- out of
> > the corner of my eye -- that there were two recent additions to the thread.
> >
> > Unfortu
On 12/03/2016 02:20 PM, Lisi Reisz wrote:
On Saturday 03 December 2016 18:09:50 Jape Person wrote:
Hi,
I'm replying to myself at the top of the thread because I saw -- out of
the corner of my eye -- that there were two recent additions to the thread.
Unfortunately, a) I use POP3 and download a
On Saturday 03 December 2016 18:09:50 Jape Person wrote:
> Hi,
>
> I'm replying to myself at the top of the thread because I saw -- out of
> the corner of my eye -- that there were two recent additions to the thread.
>
> Unfortunately, a) I use POP3 and download all my mail immediately from
> the s
On Fri 02 Dec 2016 at 18:38:12 -0500, Jape Person wrote:
> On 11/30/2016 10:57 AM, do...@mail.com wrote:
Hi,
I'm replying to myself at the top of the thread because I saw -- out of
the corner of my eye -- that there were two recent additions to the thread.
Unfortunately, a) I use POP3 and download all my mail immediately from
the server, b) my neighbor's Maine Coon cat, Mr. Potay-Toes, just
vis
On Fri 02 Dec 2016 at 18:38:12 -0500, Jape Person wrote:
> On 11/30/2016 10:57 AM, do...@mail.com wrote:
>
> >If you want you could try the Bother brand, there Linux support is
> >getting good from what I've read.
>
> Yes, I settled for a Brother MFC (MFC9340CDW) which is listed on
> openprintin
I'm more than a little tired of corporate behavior that smacks of the
consumer being owned by corporations.
Regards,
JP
I have an HP Photosmart 6520 wihich is now almost three years old. I
run HPLip, but I can't say anything about the driver plugin, as that was
not an issue for me when
On 12/02/2016 06:25 PM, rhkra...@gmail.com wrote:
On Saturday, December 03, 2016 12:19:09 AM Doug wrote:
On 11/30/2016 09:57 AM, do...@mail.com wrote:
Beware of HP inkjets, HP recently had to change the code so that people
could install ink cartridges that were not HP's and no, refilling the ol
e I know has a use for it, so it's going to be a donation.
I was going to make life easy for myself and use hplip with
something like an HP MFP. But all of the new HP MFP and scanners
seem to make use of a "driver plugin". If I'm understanding
correctly, a user has to run the h
On Saturday, December 03, 2016 12:19:09 AM Doug wrote:
> On 11/30/2016 09:57 AM, do...@mail.com wrote:
> > Beware of HP inkjets, HP recently had to change the code so that people
> > could install ink cartridges that were not HP's and no, refilling the old
> > ones did not work. So everyone had to
Luxul
router, open-source-only drivers for everything on the libreboot PCs.
But I've run into a snag with the printer and scanner.
Out of curiosity, why the printer? Is it failing? Ink unavailable?
I was going to make life easy for myself and use hplip with something
like an HP MFP. But all of
en-source-only drivers for everything on the libreboot PCs.
> But I've run into a snag with the printer and scanner.
Out of curiosity, why the printer? Is it failing? Ink unavailable?
> I was going to make life easy for myself and use hplip with something
> like an HP MFP. But all of the
es the plugin it is a host-based printer and the hbpl1
library would be used. Sorry for the misleading up a blind alley.
Even if a colour laserjet MFP can get by for printing without the plugin
it probably requires it for scanning.
http://hplipopensource.com/hplip-web/plugin.html
--
Brian.
gt; > Comments like this (those from HP and other vendors, not this one from
> > Brian) bug me.
> >
> > I don't want HP to support Linux; I want printers to use open, published
> > (by them or anyone else) protocols that _any_ OS provider can choose to
>
gt; > Comments like this (those from HP and other vendors, not this one
> > from Brian) bug me.
> >
> > I don't want HP to support Linux; I want printers to use open,
> > published (by them or anyone else) protocols that _any_ OS provider
> > can choose to
nd other vendors, not this one from
> Brian) bug me.
>
> I don't want HP to support Linux; I want printers to use open, published
> (by them or anyone else) protocols that _any_ OS provider can choose to
> support. Not that there's anything wrong with them providing hplip or
m or anyone else) protocols that _any_ OS provider can choose to
support. Not that there's anything wrong with them providing hplip or
whatever _as_well_.
Richard
signature.asc
Description: OpenPGP digital signature
On Saturday 19 November 2016 18:02:24 Jape Person wrote:
> For my "new" printer, maybe I should just find a
> way to put that old LaserJet directly on the network.
Install CUPS, client and server, on all the machines on your network, attach
the printer to one of the machines (a dedicated printer
ontents
examined. Or install it with hp-plugin and look at /usr/share/hplip
to see what you get. Delete the files by hand afterwards. Firmware
appears to be only for a few specific printers and it is the faxing,
scanning and printing libraries which are used for the majority (or
perhaps all) of multif
that seemed as though they could be pertinent
from the hplipopensource.com location.
The plugin can be downloaded from openprinting.org and its contents
examined. Or install it with hp-plugin and look at /usr/share/hplip
to see what you get. Delete the files by hand afterwards. Firmware
appears to b
read
> information at all the links that seemed as though they could be pertinent
> from the hplipopensource.com location.
The plugin can be downloaded from openprinting.org and its contents
examined. Or install it with hp-plugin and look at /usr/share/hplip
to see what you get. Delete t
On 11/19/2016 03:09 PM, Brian wrote:
On Sat 19 Nov 2016 at 13:21:23 -0500, Jape Person wrote:
On 11/19/2016 11:31 AM, Henrique de Moraes Holschuh wrote:
On Sat, 19 Nov 2016, Brian wrote:
I'd like to know that, too. I need a new home color printer, my
10-year-old HP PhotoSmart (blobless) MFP
1 - 100 of 245 matches
Mail list logo
