Glen
Don’t be scarred away from AGMs. Persuasion came with 2-4d AGMs and a Group 31
starter. I replaced the Group 31 about 6 years ago from Canadian tire, still
going. The important factor here is to charge them properly. I would say your
are good to go as you already have AGMs.
Mike
C&C
Edd
I’m curious how did you seal your board in place.
Mike
> On Jun 28, 2018, at 11:46 AM, Schillay.com via CnC-List
> wrote:
>
> Mike,
>
> As most everyone on the list knows, I sailed with a centerboard on my 37+ for
> almost 15 years before sealing it in the keel. While the 37 has a diffe
Well the recent Kidde recall got me to checking my fire extinguishers. I have 6
onboard. One was dated 1977 and another 1984. I’m willing to donate them to
anyone that wants them, you pay the shipping. LOL
Mike
Persuasion
___
Thanks everyone for su
Hi Bob
I started the season with 1.5 anodes. I’m in fresh water, Lake Ontario and St.
Lawrence river. I believe I have the correct anodes for fresh water. I really
don’t want to go the galvanic isolator route
Mike
> On Aug 9, 2018, at 12:04 AM, Robert Boyer via CnC-List
> wrote:
>
> What
When mine acted like that it was the circuit board. If you go the pro route
make sure they are knowledgeable with 12 volt systems. I went the pro route
(residential) and he overcharged the system. It took me a while to get the
pressure lowered. If you have a danfoss compressor there is lots
Whoa hold on there
I consider Persuasion a floating bomb. I carry dinghy fuel, generator fuel and
propane in the lazerette. So if you are a cruiser and carry various petroleum
products I would recommend running the blower. Also my coast guards friends to
the south asked me in a had a blower
Brian
I have a three blade Campbell Sailor and am very pleased.
http://www.westbynorth.com/campbell-sailer/
Mike
C&C 37
Begin forwarded message:
> From: Brian Davis via CnC-List
> Date: October 20, 2019 at 10:36:23 AM EDT
> To: cnc-list@cnc-list.com
> Cc: Brian Davis
> Subject: Stus-List 3 bl
Been sailing 35+ years, 3 different boats. Sailed in NB, NS and ON. I have
never removed a compass.
Waiting for survey at +1C
Mike
Begin forwarded message:
> From: Robert Abbott via CnC-List
> Date: November 4, 2019 at 8:12:59 AM EST
> To: cnc-list@cnc-list.com
> Cc: Robert Abbott
> Sub
DaveI went with PlasTeak a few years ago. New plywood with 2 coats of West system epoxy. Looks real good. Got it at Defender. Can send some tips and pics if you desire.MikeBegin forwarded message:From: David Knecht via CnC-List Date: November 9, 2019 at 9:22:28 AM ASTTo: CnC discussion list CnC
;
> Sent from my iPhone
>
>>> On Nov 9, 2019, at 4:46 PM, Mike Taylor via CnC-List
>>> wrote:
>>>
>>
>> Dave
>>
>> I went with PlasTeak a few years ago. New plywood with 2 coats of West
>> system epoxy. Looks real good. G
o see them.
As much as I am a traditionalist, ease of repair my win out.
I'd really like to know if you can notice a distinct difference between this
and real teak.
Thanks!
Bruce
Sent from Samsung tablet.
Original message ----
From: Mike Taylor via CnC-List
Date: 11/9/
onin
> Reedville - Chesapeake Bay
> Ronin’s Overdue Refit
>
>> On Nov 15, 2019, at 6:16 PM, Mike Taylor via CnC-List
>> wrote:
>>
>> Bruce, Rod, Et Al
>>
>> Here is a link to some pictures of my Lonseal cabin sole install. Cabin Sole
>>
t a bit dark. Think that would
> work?
>
> Sent from my iPhone
>
>>> On Nov 15, 2019, at 7:17 PM, Mike Taylor via CnC-List
>>> wrote:
>>>
>>
>> Bruce, Rod, Et Al
>>
>> Here is a link to some pictures of my Lonseal cabin sole
us-List Fwd: FW: Fwd: Fwd: Cabin Sole resurfacing
>
>
> So if you had to can you take your cabin sole up? I can’t find out if they
> have a Canadian distributer?
>
> Thanks Regards
> Rod
>
> From: CnC-List On Behalf Of Mike Taylor via
> CnC-List
> Sent: N
Joe
The Moses-Saunders Power Dam ar Cornwall/Massena controls Lake Ontario and the
out flow down stream. There is a lot of controversy over the IJC Plan 2014.
The deciding factor is controlling the spring flooding at Montreal and depths
for commercial traffic. I’ve really simplified it, it i
It seems like too much flow could flood Montreal. Last time I was in Montreal
> the current headed east was pretty strong anyway, so I assume this really
> could effect slow boats headed upstream.
>
> Joe
>
> Coquina
>
> On 11/25/2019 7:53 AM, Mike Taylor via CnC-List wrote
t;
> Next dumb question - assuming someone decides to lower Lake Ontario a bit,
> how well does that lower the other lakes, if at all?
>
> It seems like too much flow could flood Montreal. Last time I was in Montreal
> the current headed east was pretty strong anyway, so I assu
masts unstepped? Go all the way out the long way via the Saint
>> Lawrence? Trucks?
>> Joe
>> Coquina
>>
>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Mike
>> Taylor via CnC-List
>> Sent: Monday, November 25, 2019 9:33 AM
>> To
Hi Folks
It’s time to close another chapter in my life. After much thought and tears I
(we) have decided it’s time to part with Persuasion. For more information
please visit www.persuasion37.ca
Regards
Mike
___
Thanks everyone for supporting this
John
I’ve been using a Delta Sureset 35 as my primary for well over 10 years now. I
can tell you it has held in 50 kt. winds. My secondary is a Bruce 44 that
hasn’t been out of the locker in years.
YMMV
Mike
Begin forwarded message:
> From: John Conklin via CnC-List
> Date: January 3, 202
lle - Chesapeake Bay
> Ronin’s Overdue Refit
>
>> On Jan 3, 2020, at 11:56 AM, Mike Taylor via CnC-List
>> wrote:
>>
>> Hi Folks
>>
>> It’s time to close another chapter in my life. After much thought and tears
>> I (we) have decided it’s ti
Everything at our club is cancelled until May 2nd. Oh wait we shut down just
after haul-out in Oct 😜
Mike
> On Mar 14, 2020, at 2:22 PM, Shawn Wright via CnC-List
> wrote:
>
>
> Our club just closed the bar and clubhouse, and Sunday races are cancelled
> for the next 3 weekends. Other loc
Hi Will
For my rain water collection I tied into the scupper next to the toe rail on
the deck. Used a tee and two shut off valves. One side goes to the original
drain and the other I put a hose barb on. Let it rain for a few minutes attach
a hose and then switch valve positions. Your deck m
Mike Taylor via CnC-List
To: cnc-list@cnc-list.com
Cc: Mike Taylor
Sent: Sun, Mar 22, 2020 5:25 pm
Subject: Stus-List Fwd: Rain water collection
Hi Will
For my rain water collection I tied into the scupper next to the toe rail on
the deck. Used a tee and two shut off valves. One side goes to
> 2950 Breckenridge Lane, Suite Nine
> Louisville, Kentucky 40220-1462
> 502-584-7255
>
>
> -Original Message-
> From: Mike Taylor via CnC-List
> To: cnc-list@cnc-list.com
> Cc: Mike Taylor
> Sent: Mon, Mar 23, 2020 12:53 pm
> Subject: Stus-List FW
Here in the Great White North our club has made the decision to delay
everything by one month. All buildings are off limits. We may check our boats
but working on them is discouraged. That means launch will be June 5th.
Hoping we get a week or so to prep our boats prior to launch.
Mike
Pers
I’ve been using a drill pump for over 10 years. Works great. Can also
transfer while moving. Also sucks all but about a tsp. from the jerry can.
Mike
Begin forwarded message:
> From: Edd Schillay via CnC-List
> Date: May 16, 2020 at 1:59:45 PM EDT
> To: cnc-list@cnc-list.com
> Cc: Edd Schill
Did you try Brafasco on TerryFox.
Mike
Begin forwarded message:
> From: David Morris via CnC-List
> Date: May 22, 2020 at 9:14:51 PM EDT
> To: cnc-list@cnc-list.com
> Cc: djmor...@djma-ltd.com
> Subject: Stus-List Source for long stainless/brass screws
> Reply-To: cnc-list@cnc-list.com
>
>
Edd
If you want some pictures of an install of a vertical windlass with a capstan
let me know I’ll shoot you some pics. Have to cut a hole in locker lid for
capstan. I’ve used it to send daughters and son in-laws up the mast.
Mike
Persuasion
37’ K/CB
Begin forwarded message:
> From: Edd Sc
il No.: NCC-1701-B
> Venice Yacht Club | Venice Island, FL
> www.StarshipSailing.com
> ———-
> 914.774.9767 | Mobile
> ———-
> Sent via iPhone 11 Pro
> iPhone. iTypos. iApologize
>
>
> On Jun 2, 2020, at 8:35 PM, Mike Taylor via CnC-List
> wro
For those that requested pictures of my windlass install see the link below.
Sorry about quality and possible duplicates.
https://drive.google.com/drive/folders/1x3Kr4gCt1hJ41oOJVzwBrXTkehMLYrJ3?usp=sharing
Open to questions and/or criticism.
Mike
Persuasion
’37 K/CB
--
This email has been c
Mike
I literally just did this. My granddaughter broke off the pin for her earbuds
in the headphone socket on her Kindle. There are lots of videos on YouTube.
In the end I was able to pop it out with a sharp object (map pin) and lots of
persistence (pun intended)
Mike
Begin forwarded mess
Hi Stu
Would you please reinstate my account. I would like to start receiving emails
again.
Thanks
Mike
Begin forwarded message:
> From: Persuasion37 via CnC-List
> Date: September 10, 2018 at 11:17:05 AM EDT
> To: "cnc-list@cnc-list.com"
> Cc: Persuasion37
> Subject: Stus-List Suspend
>
Perry
You are going through the same thought process I did a few years ago. At the
time I decided not to go that route for the issues you mentioned plus I didn’t
want the weight. I had an opportunity to get welding cable and used that for
wiring a 1500w windless. It’s braided but not tinned.
34 matches
Mail list logo
