Rod No I cannot remove the sole. The screws are under the Lonseal. I bought it from Defender in the US and shipped it to a UPS store in the US. I’m only 30 minutes away. Noah’s marine in TO carries the product.
http://www.noahsmarine.com/Psearchresult.asp?stye=ss One of the reasons I went with Lonseal is that I asked a local chandler for T&H plywood and was told they don’t handle it anymore because of damage in transit. Mike Begin forwarded message: > From: Rod Stright <strig...@eastlink.ca> > Date: November 16, 2019 at 8:49:18 AM EST > To: persuasio...@gmail.com > Subject: RE: Stus-List Fwd: FW: Fwd: Fwd: Cabin Sole resurfacing > > > So if you had to can you take your cabin sole up? I can’t find out if they > have a Canadian distributer? > > Thanks Regards > Rod > > From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Mike Taylor via > CnC-List > Sent: November-16-19 9:45 AM > To: cnc-list@cnc-list.com > Cc: Mike Taylor <persuasio...@gmail.com> > Subject: Stus-List Fwd: FW: Fwd: Fwd: Cabin Sole resurfacing > > Rob > > If your existing T&H plywood is in good shape then I think a good sanding is > all that would be required. Mine was delaminating. The hardest part was > gluing it down. As I mentioned before I didn’t do the off gassing and got a > couple of bubbles. > > Mike > > > Begin forwarded message: > > From: Rod Stright <strig...@eastlink.ca> > Date: November 15, 2019 at 6:41:54 PM EST > Cc: Mike Taylor <persuasio...@gmail.com> > Subject: Re: Stus-List FW: Fwd: Fwd: Cabin Sole resurfacing > > Hey Mike looks great. I was thinking about putting it over my existing teak > and holly which is in reasonable condition but a bit dark. Think that would > work? > > Sent from my iPhone > > > On Nov 15, 2019, at 7:17 PM, Mike Taylor via CnC-List <cnc-list@cnc-list.com> > wrote: > > > Bruce, Rod, Et Al > > Here is a link to some pictures of my Lonseal cabin sole install. Cabin Sole > > Sorry Rod I down race so I can’t answer your questions. My opinion; the > product itself is a superior vinyl product and with proper installation there > should be no issue. That being said if you drop something the Lonseal will > hold up well but the substrate may dent and be visible. > > Some tips > Design substrate (plywood) with as few seams as possible. > Router bottom outsides edges with ½” router > Apply a minimum of 2 coats of epoxy to all pieces on all sides > Roll out the Lonseal on a solid flat surface (living room floor) upside down > then lay plywood upside down in the pattern it will be applied. Cut Lonseal > at least 1” larger than required on all side. Makes it easier to install and > easier to trim after glue is set. > Tape joints like you would with drywall. I didn’t. > Use j-roller instead of recommended 100 lb. roller. See mod I made to > j-roller so I could apply more weight > Follow gluing instructions to the letter especially the off gassing. I > didn’t and some bubbles occurred that couldn’t be rolled out. > Use router with edge trimmer to cut bilge ports. > > I was lucky that my sole was a bit narrower than the LonSeal. Just ensure > the pieces in the v-berth and the small piece in the galley lines all line > up. Same thing for the bilge access ports. I had to make a small lengthwise > cut around the mast truck to fit around the centreboard tube. It can’t be > seen unless you really look for it. > > Mike > > > From: bwhitmore via CnC-List > Sent: November 10, 2019 7:11 AM > To: cnc-list@cnc-list.com > Cc: bwhitmore > Subject: Re: Stus-List Fwd: Fwd: Cabin Sole resurfacing > > Hi Mike and group, > > If anyone has good photos of the installed Lonseal PlasTeak product, I'd > like to see them. > > As much as I am a traditionalist, ease of repair my win out. > > I'd really like to know if you can notice a distinct difference between this > and real teak. > > Thanks! > > Bruce > > > > Sent from Samsung tablet. > > -------- Original message -------- > From: Mike Taylor via CnC-List <cnc-list@cnc-list.com> > Date: 11/9/19 4:42 PM (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: Mike Taylor <persuasio...@gmail.com> > Subject: Stus-List Fwd: Fwd: Cabin Sole resurfacing > > Hi Rod > > Here is a link to the product I purchased from Defender. Correction on > product name. PlasTeak is the trade name. Lonseal makes them all. > > https://www.defender.com/product3.jsp?path=-1%7C2276179%7C2276198%7C2276201&id=3325405 > > I’m on the east coast now I could provide pics next week when I get home. > > Mike > Begin forwarded message: > > From: Rod Stright <strig...@eastlink.ca> > Date: November 9, 2019 at 5:06:27 PM AST > Cc: Mike Taylor <persuasio...@gmail.com> > Subject: Re: Stus-List Fwd: Cabin Sole resurfacing > > Can you send additional info haven’t heard of it here. > > Thanks > Rod > > Sent from my iPhone > > > > On Nov 9, 2019, at 4:46 PM, Mike Taylor via CnC-List <cnc-list@cnc-list.com> > wrote: > > > Dave > > I went with PlasTeak a few years ago. New plywood with 2 coats of West > system epoxy. Looks real good. Got it at Defender. Can send some tips and > pics if you desire. > > Mike > Begin forwarded message: > > From: David Knecht via CnC-List <cnc-list@cnc-list.com> > Date: November 9, 2019 at 9:22:28 AM AST > To: CnC discussion list CnC <cnc-list@cnc-list.com> > Cc: David Knecht <davidakne...@gmail.com> > Subject: Stus-List Cabin Sole resurfacing > Reply-To: cnc-list@cnc-list.com > > The cabin sole on my boat is not in great shape. There are areas where the > holly stripes and are gone or pulling away. I am considering what to do and > have a vague recollection of someone using a glue-on faux teak/holley > covering over the wood (Nautikflor?) but I can’t find that discussion > anywhere in the archives. Has anyone done that? Thanks- Dave > > S/V Aries > 1990 C&C 34+ > New London, CT > > > > <pastedGraphic.tiff> > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
