Re: Stus-List binnacle light

2014-07-13 Thread Joe Della Barba via CnC-List
Fair odds the pull switch went bad. Check for voltage on both sides of it. Joe Della Barba j...@dellabarba.com From: Joel Aronson [mailto:joel.aron...@gmail.com] Sent: Sunday, July 13, 2014 6:28 AM To: Joe Della Barba; cnc-list@cnc-list.com Subject: Re: Stus-List binnacle light Don

Re: Stus-List USB ports and users

2014-07-16 Thread Joe Della Barba via CnC-List
I just got a USB fan for $10 from the dollar store. It works fine and is fairly quiet. Did I tell you it was only $10? Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C^C 35 MK I ___ This List is provided by t

Re: Stus-List A4 engine problems

2014-08-05 Thread Joe Della Barba via CnC-List
I used to put 2 gallons of gasoline in my old Mercedes 300D per tank of diesel in the winter. Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Martin DeYoung via CnC-List Sent: Tuesday, August 05, 2014 5:45 PM To: Burt Stratton; cnc

Re: Stus-List Ok more atomic 4 issues...dammit!

2014-08-13 Thread Joe Della Barba via CnC-List
FYI a friend had random A4 shutdowns. I put a vacuum gauge on the fuel system and it would pull a vacuum before quiting . We found leaves and a rag in the fuel tank. A new diesel would have quit just as often ;) Sent from my iPhone > On Aug 13, 2014, at 18:58, Danny Haughey via CnC-List > wro

Re: Stus-List Alternator for Yanmar 3GM30

2014-08-14 Thread Joe Della Barba via CnC-List
I think 50-55 amp alternators would be easy to find. I got rid of my AGM batteries and went back to gel. IMHO Gel are much better. Sent from my iPhone > On Aug 14, 2014, at 11:25, Marek Dziedzic via CnC-List > wrote: > > If you go for AGM, you will probably need some other source of chargin

Re: Stus-List Rebuild suggestions for Atomic IV

2015-10-10 Thread Joe Della Barba via CnC-List
I strongly suggest going to http://www.moyermarine.com/. The forum there is extremely helpful with A4 issues and that is where you'll be getting the shop manual and parts. Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ &am

Re: Stus-List Cabin Heat

2015-11-05 Thread Joe Della Barba via CnC-List
That all depends on how they get plumbed in. The way the A4 works the heater is in the heat exchanger loop after the thermostat, so it is not providing “extra” cooling. The A4 does not have a separate heater loop like many diesel engines (and car engines for that matter). Joe Della Barba

Re: Stus-List Chain Plate Bolt Torque

2015-11-05 Thread Joe Della Barba via CnC-List
I wouldn’t think they need to be any tighter than tight enough to compress the lock washer and not come undone. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of S Thomas via CnC-Lis

Re: Stus-List Cabin Heat

2015-11-05 Thread Joe Della Barba via CnC-List
Besides for the danger, those 1 pound bottles would not last long at all. We had a solid fuel heater on a wooden ketch we used to have when I was young. It was nice on a chilly morning. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: Cn

Re: Stus-List Cabin Heat

2015-11-05 Thread Joe Della Barba via CnC-List
cannot be counted on to be gas-tight below decks. We ended up mounting a nice varnished mahogany board to the stern rail and mounting a 6 pound vertical aluminum tank to it. It was fine to be naked as long as it was outside and not positioned to leak into the boat. Joe Della Barba j

Re: Stus-List substitution of depth transducers

2015-11-26 Thread Joe Della Barba via CnC-List
NMEA units or combo speed depth and temp units aside, a basic 200 KHz transducer is pretty good for a wide variety of depth finders. My transducer dates back to the 1970s and I think I am on about the 5th depthfinder since then. It still works fine. Joe Della Barba j...@dellabarba.com Coquina

Re: Stus-List substitution of depth transducers

2015-11-26 Thread Joe Della Barba via CnC-List
If anyone needs one, I have a S-H 200 KHz transducer. I bought it when I got a new depthfinder in case the issue was the old transducer, but it wasn't. Joe Della Barba j...@dellabarba.com -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joe

Re: Stus-List Wishing Every C&C-er a Happy Thanksgiving

2015-11-27 Thread Joe Della Barba via CnC-List
Happy t day +1. On way to rock hall first test of FWC Sent from my iPhone > On Nov 27, 2015, at 11:13, Joel Aronson via CnC-List > wrote: > > Went to Plymouth Wednesday. Saw the Mayflower. What better way to celebrate > Thanksgiving! > We had a great feast at my sisters house. > Headed t

Re: Stus-List Cost to recover cushions - ouch

2015-12-17 Thread Joe Della Barba via CnC-List
There is an upholstery shop in West Annapolis we are going to try. I got a quote of something like $200 per cushion. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via Cn

Re: Stus-List Venetian parade - now inverters

2015-12-19 Thread Joe Della Barba via CnC-List
the dirt the first pass, not after 5 passes, so it evens out in the end. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Saturday, December

Re: Stus-List Venetian parade - now inverters

2015-12-20 Thread Joe Della Barba via CnC-List
handle. My wife has a CPAP machine that needs to run all night and the little inverter handles that fine. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley vi

Re: Stus-List Winter discussions - depth sounder offset

2015-12-20 Thread Joe Della Barba via CnC-List
The same. I used a marked pole in my slip to set the offset. I want the depth to be the depth. Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ & Melody via CnC-List Sent: Sunday, December 20, 2015 4:35 PM To: cnc-list@cnc-list

Re: Stus-List Starting to 'smile'

2015-12-20 Thread Joe Della Barba via CnC-List
IIRC – the MK III can have the standard “tighten the bolts” smile or a more serious issue with fiberglass repairs needed. Is there a way to tell which is which? Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I Unsmiled this August with a

Re: Stus-List Holiday wishes

2015-12-25 Thread Joe Della Barba via CnC-List
Merry Christmas everyone! May all your winds be fair and seas on the stern :) If it stops raining we'll get a Christmas sail in. My neighbors actually had their air conditioning on yesterday. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquin

Re: Stus-List dinghy davits

2015-12-30 Thread Joe Della Barba via CnC-List
This is our dinghy under tow. In 15 years of RIB with engine-on towing I have never had an issue other than the drag. http://www.dellabarba.com/sailing/dinghy.mp4 Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> C

Re: Stus-List dinghy davits

2015-12-31 Thread Joe Della Barba via CnC-List
Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Sailnomad via CnC-List Sent: Wednesday, December 30, 2015 9:12 PM To: cnc-list@cnc-list.com Cc: Sailnomad Subject: Re: Stus-L

Re: Stus-List Standard Horizon GX2200

2016-01-07 Thread Joe Della Barba via CnC-List
Having both Icom and SH radios, they both work well but the Icoms tend to have better transmit audio. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Th

Re: Stus-List Standard Horizon GX2200

2016-01-07 Thread Joe Della Barba via CnC-List
Probably. NMEA out from the radio to NMEA in on the plotter. You need to match the speed settings for the ports. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert Boyer via CnC-Lis

Re: Stus-List Lemon oil cause mildew?

2016-01-10 Thread Joe Della Barba via CnC-List
calcium chloride do tonight. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Pete Shelquist via CnC-List Sent: Sunday, January 10, 2016 10:44 AM To: cnc-list@cnc-list.com Cc: Pete Shelquist S

Re: Stus-List Testing DSC

2016-01-15 Thread Joe Della Barba via CnC-List
ttery voltage climb with the sun and go down after dark. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Neil Gallagher via CnC-List Sent: Friday, January 15, 2016 9:12 AM T

Re: Stus-List Testing DSC

2016-01-15 Thread Joe Della Barba via CnC-List
routine individual call to their Maritime Mobile Service Indentity (MMSI). You can test DSC with a buddy. Do *not* send ALL SHIPS. Someone did that around here and generated a ton of radio traffic trying to figure out WTF was going on. Joe Della Barba j...@dellabarba.com From: CnC-List

Re: Stus-List Mystery Coolant

2016-01-30 Thread Joe Della Barba via CnC-List
FWC does not usually mean *literally* fresh water cooled. North of Florida, most “FWC” engines use a mix of water and antifreeze. I buy the premix 50/50 antifreeze myself for my A4. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From

Re: Stus-List Made an offer on a C&C 35 mk2

2016-01-31 Thread Joe Della Barba via CnC-List
My 35 MK I has done Bermuda 3 times and much other rough stuff. The boats can take it if you can. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I www.dellabarba.com <http://www.dellabarba.com> http://www.dellabarba.com/sailing/gor/G

Re: Stus-List Nav Station Panel and Volt Meter Recommendations

2016-02-15 Thread Joe Della Barba via CnC-List
I get meters from here: http://www.ebay.com/usr/elite.element?_trksid=p2053788.m1543.l2754 So far my hit rate is about 90% good with these. Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Monday

Re: Stus-List Nav Station Panel and Volt Meter Recommendations

2016-02-15 Thread Joe Della Barba via CnC-List
OK - trying again with the photo. It looks odd because I compressed the crap out of it to fit on the email list. Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: Monday, February 15, 2016 2:10 PM To: cnc

Re: Stus-List Nav Station Panel and Volt Meter Recommendations

2016-02-15 Thread Joe Della Barba via CnC-List
I have been poking around this store again - http://stores.ebay.com/eliteelement/ - and might try this - http://www.ebay.com/itm/DC-120V-200A-Volt-Amp-Combo-Meter-Battery-Charge-Dis charge-Indicator-Shunt-/170901497030?hash=item27ca85e4c6 Joe Della Barba Coquina C&C 35 MK

Re: Stus-List Nav Station Panel and Volt Meter Recommendations

2016-02-16 Thread Joe Della Barba via CnC-List
-90V-0-200A-Voltage-Current-Ah-Powe r-Meter-Battery-AGM-SLA-LEAD-/180463308411?hash=item2a04738e7b Hope this helps Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina ___ Email address: CnC-List@cnc-list.com To ch

Re: Stus-List Octopus linear drive

2016-02-20 Thread Joe Della Barba via CnC-List
Back in the day I bought Octopus drives when installing Autohelm/Raytheon autopilots. Back then at least we thought of them as better and cheaper. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On

Re: Stus-List Stus-list: portable generator on sale at harbor freight

2016-02-28 Thread Joe Della Barba via CnC-List
I got a 50 watt solar panel and a charge controller for under $200 total that do a fine job of keeping my batteries up while on a mooring. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-li

Re: Stus-List Fire blankets

2016-03-19 Thread Joe Della Barba via CnC-List
CO2 and halon are very nice ways to put out a fire without destroying the interior. CO2 extinguishers tend to be fairly big and halon is expensive now. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.c

Re: Stus-List now cored hulls

2016-03-25 Thread Joe Della Barba via CnC-List
w if you had to pay someone by the hour……OUCH! Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave Godwin via CnC-List Sent: Friday, March 25, 2016 8:44 PM To: cnc-list@cnc-list.com Cc: Dave Godwin Subject: Re: Stus-List now cored h

Re: Stus-List Email List or Forum

2015-03-14 Thread Joe Della Barba via CnC-List
. Joe Della Barba j...@dellabarba.com Coquina ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List List or forum

2015-03-14 Thread Joe Della Barba via CnC-List
If you all go to Facebook I will be gone. I will not log into that for any reason. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim Watts via CnC-List Sent: Friday, March 13, 2015 9:30

Re: Stus-List Deck hardware for mooring

2015-03-14 Thread Joe Della Barba via CnC-List
My experience with C&Cs and my own mooring lead me to believe they did a good job anchoring deck hardware. Chafe is your enemy, not the cleats pulling out. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-li

Re: Stus-List Deck hardware for mooring

2015-03-14 Thread Joe Della Barba via CnC-List
like being on a giant rubber band :) In the morning the anchor was dug in so deep we needed a CG patrol boat to help get it loose :( From the looks of the line the anchor was at least *6 feet* under! Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina WWW.CRYC.ORG

Re: Stus-List Deck hardware for mooring

2015-03-15 Thread Joe Della Barba via CnC-List
They could disagree, but I was on the boat and the chain was taught. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I CRYC From: Eric Baumes [mailto:eric.bau...@gmail.com] Sent: Saturday, March 14, 2015 11:22 PM To: Joe Della Barba; cnc-li

Re: Stus-List New Wiring Diagram Draft (Edd Schillay)

2015-03-29 Thread Joe Della Barba via CnC-List
The Blue Sea ACR that I have has a connect voltage and disconnect voltage. This prevents relay chatter and does hold the connection at float levels. Relay Contact Position Combine 30 sec 13.6V DC Open 10 sec 12.35V DC Open 30 sec 12.75V DC Joe Della Barba j

Re: Stus-List New Wiring Diagram Draft

2015-03-29 Thread Joe Della Barba via CnC-List
gh voltage in the very cold weather we had even on the cold setting. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Sunday, March 29, 2015 9

Re: Stus-List New Wiring Diagram Draft

2015-03-29 Thread Joe Della Barba via CnC-List
You also left a galvanic isolator out of the diagram. See http://promariner.com/products/galvanic-isolation/prosafefs-series/ These keep you from sharing your zinc out to the entire marina ;) Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: Cn

Re: Stus-List New Wiring Diagram Draft

2015-04-02 Thread Joe Della Barba via CnC-List
Commercial galvanic isolators have both capacitors AND diodes. Belt and suspenders. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tim Goodyear via CnC-List Sent: Thurs

Re: Stus-List WIRING PLANS

2015-04-09 Thread Joe Della Barba via CnC-List
FYI – the glass type fuses are much more likely to get corroded contacts than the blade type fuses. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Peter Fell via CnC-List Sent: Thursday, Ap

Re: Stus-List Interesting 35-1 interior reconfiguration

2015-04-24 Thread Joe Della Barba via CnC-List
They lost the best sea berth in the boat! Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Friday, April 24, 2015 3:04 PM To: CnClist Subject: Stus-List Interestin

Re: Stus-List Interesting 35-1 interior reconfiguration

2015-04-24 Thread Joe Della Barba via CnC-List
That is a 35. Joe Della Barba Coquina j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Sent: Friday, April 24, 2015 9:06 PM To: 'Dennis C.'; cnc-list@cnc-list.com Subject: Re: Stus-List Interesting 35-

Re: Stus-List Connection fittings for corrugated bilge pump hose

2015-04-27 Thread Joe Della Barba via CnC-List
That hose should just be replaced by new hose with the smooth sections. When it gets old it starts getting pinhole leaks in various places Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-li

Stus-List longest running ad

2015-04-30 Thread Joe Della Barba via CnC-List
http://www.yachtworld.com/boats/1969/C%26C-Crusader-2725539/Galesville/MD/United-States#.VUKwJ5P-XhI I am 99% sure this boat was listed and I took a look at her in the mid 90s. She has not sold yet. Joe Della Barba j...@dellabarba.com COQUINA C&

Re: Stus-List longest running ad

2015-04-30 Thread Joe Della Barba via CnC-List
http://www.yachtworld.com/boats/1973/C%26C-39-Sail-1437090/Portsmouth/VA/Uni ted-States#.VULL-ZP-XhI I think this one is at least 5-8 years on YW. Joe Della Barba j...@dellabarba.com From: robert [mailto:robertabb...@eastlink.ca] Sent: Thursday, April 30, 2015 8:00 PM To: Joe Della

Re: Stus-List Alternator Output Question

2015-05-04 Thread Joe Della Barba via CnC-List
I am 99% sure it is the orange wire labeled Positive Output next to the AC tap. It will take a little more doing than just moving a wire. I’ll try and trace that diagram out when I get a chance. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&

Re: Stus-List Indigo 3 blade propeller

2015-05-14 Thread Joe Della Barba via CnC-List
I am very happy with the Indigo prop on my boat. Both better and quieter :) Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Aaron Rouhi via CnC-List Sent: Thursday, May

Re: Stus-List Towing, Insurance, etc

2015-05-18 Thread Joe Della Barba via CnC-List
a new cutless bearing. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Sent: Monday, May 18, 2015 7:53 PM To: cnc-list@cnc-list.com Cc: Rick Brass Subject

Re: Stus-List House/starting batteries.

2015-05-18 Thread Joe Della Barba via CnC-List
The A4 draws about 125 amps starting. I use a U1 size battery as the start battery – 35 AH and about 350 MCA. It works just fine. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> COQUINA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John Penni

Re: Stus-List House/starting batteries.

2015-05-18 Thread Joe Della Barba via CnC-List
I have watched the meter when I start the engine. The A4 usually draws about 125-130 amps or so. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Se

Re: Stus-List A-4 zincs

2015-05-22 Thread Joe Della Barba via CnC-List
The A4 has no zincs unless FWC Sent from my iPhone > On May 22, 2015, at 10:30, Danny Haughey via CnC-List > wrote: > > Hi Burt, > > Moyer Marine has a service and repair manual they sell for about $50. It's > worth it. > > I'd also recommend a fresh water cooling kit to stop any more s

Stus-List Annapolis

2015-05-22 Thread Joe Della Barba via CnC-List
Coquina en route Annapolis Sent from my iPhone > On May 22, 2015, at 8:15, Stelios via CnC-List wrote: > > Menemsha is lovely bring your camera! The vacation place of Obama. Also on > the breakwater you may see gigantic fat naked short-haired lesbians with > large tattoos basking on the rock

Stus-List sail question

2015-06-04 Thread Joe Della Barba via CnC-List
My furling jib is utterly beat. I think a bedsheet would have more shape. So what size say you all for a replacement? I am thinking going a little small, say 130%, and flying the chute asym style for light air off the wind. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.

Re: Stus-List sail question

2015-06-04 Thread Joe Della Barba via CnC-List
looks like I will need to go new for this. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: Thursday, June 04, 2015 10:02 AM To: cnc-list@cnc-list.com Cc

Re: Stus-List C&C30-1 climb to top of mast?

2015-06-09 Thread Joe Della Barba via CnC-List
o one of them goes up and I do the grunt work. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> COQUINA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of robert via CnC-List Sent: Tuesday, June 09, 2015 9:18 AM To: cnc-list@cnc-list.com Cc: robert Su

Re: Stus-List NYC help

2015-06-12 Thread Joe Della Barba via CnC-List
Aren’t there some moorings on the Hudson River side? Around 70th Street maybe? Speaking of NY, we ended up going through Hell’s Gate against the current. Boat speed was maybe 1 knot at best on a very hot summer day :( Coquina Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc

Re: Stus-List depth finder display

2015-06-15 Thread Joe Della Barba via CnC-List
My 200 KHz transducer dates back to about 1980 or so and the depth finder display is on its 4th or 5th version by now. Most depth finders are 200 KHz and work with most transducers. I have a spare 200 KHz transducer sitting around if you end up needing one. Joe Della Barba j...@dellabarba.com

Re: Stus-List 12 volt cordless drill

2015-06-19 Thread Joe Della Barba via CnC-List
except the original NiCad battery pack was worthless. Coquina Joe Della Barba j...@dellabarba.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc

Stus-List At Corsica river now Annapolis end of week.

2015-06-22 Thread Joe Della Barba via CnC-List
Out this week with kids Coquina Sent from my iPhone > On Jun 22, 2015, at 9:18, "Hoyt, Mike via CnC-List" > wrote: > > Thanks Brian > > The injector rebuild is something that is on my list of upcoming projects > > Mike > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf

Stus-List List aid

2015-06-22 Thread Joe Della Barba via CnC-List
15 watt solar panel. Best offer by July 1. Money will go to Stu. Free shipping to 48 states. Works fine replaced by 50 watt panel because kids and their stuff use all my power. Joe Coquina Sent from my iPhone > On Jun 22, 2015, at 9:18, "Hoyt, Mike via CnC-List" > wrote: > > Thanks Brian

Re: Stus-List Cruising/max speed for 1980 C&C 32

2015-06-24 Thread Joe Della Barba via CnC-List
30 hp vs. 18. Joe Coquina Sent from my iPhone > On Jun 24, 2015, at 1:42, Stevan Plavsa via CnC-List > wrote: > > My 1980 32 is hull #59 ... I have an atomic 4 so different beast but I can > cruise six plus knots at pretty low RPM. Two blade fixed, no idea as to size. > > Steve > Suhana, C

Re: Stus-List Someone got a good deal

2015-06-27 Thread Joe Della Barba via CnC-List
At this rate I should just buy the MK II instead of getting new cushions, sails, radar, etc... Joe Della Barba j...@dellabarba.com Coquina C&CN 35 MK I -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Wally Bryant via CnC-List Sent: Saturday,

Re: Stus-List Bottom paint -ingredient change

2015-07-01 Thread Joe Della Barba via CnC-List
All I know is the old Sears bottom paint would keep your boat spotless all year and also any other boats nearby. It killed anything that dared to get within 100 yards! Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> C

Re: Stus-List One for the hams in the group

2015-07-09 Thread Joe Della Barba via CnC-List
I have had a Kenwood TS-440 and an SGC tuner for my backstay antenna aboard Coquina since about 1994. I am not a fan of the hamsticks for anything below 20 meters. The losses in the antenna are huge for the lower frequencies. Joe Della Barba j...@dellabarba.com Coquina C&C 35 MK I 73 DE N

Re: Stus-List Vessel Documentation Fee

2015-07-09 Thread Joe Della Barba via CnC-List
The $$ do not bother me – the PITA of doing it YEARLY does! Come on – 5 years or something! Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Sent: Thursday, July 09, 2015 4:02 PM To: cnc-list@cnc-list.com

Re: Stus-List Boat time and weather

2015-07-10 Thread Joe Della Barba via CnC-List
storms that the kids loved. I had to keep telling them to not hang onto the shrouds while watching lightning (ouch!). Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via CnC-List Sent:

Re: Stus-List Vessel Documentation Fee

2015-07-10 Thread Joe Della Barba via CnC-List
dredging if they SWEAR it will be paid directly to the dredging company, but that is NOT where it goes :( Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC

cnc-list@cnc-list.com

2015-07-22 Thread Joe Della Barba via CnC-List
not. Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ & Melody via CnC-List Sent: Wednesday, July 22, 2015 1:02 AM To: cnc-list@cnc-list.com Cc: Russ & Melody Subject: Re: Stus-List Exploding C&C Okay then, we have a

cnc-list@cnc-list.com

2015-07-22 Thread Joe Della Barba via CnC-List
C&C used for fuel systems in the early 70s, odds are the fuel didn’t leak out of the ENGINE ;) BTW – if I were an insurance adjuster, this fire would get a second look….. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: Kevin Driscoll [mailto:

cnc-list@cnc-list.com

2015-07-23 Thread Joe Della Barba via CnC-List
anol gas decades later. Still, that piece they used for a 90 degree turn was obviously part of a sink drain or something and not related to fuel hose even back in 1973. Joe Della Barba j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jerome Tauber via CnC-L

Re: Stus-List Yacht Canvas/Bimini Top

2015-07-24 Thread Joe Della Barba via CnC-List
with someone far away. The “sample boat” they found to use in Toronto was a C&C 35, but not an identical one. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Ar

Re: Stus-List Yacht Canvas/Bimini Top

2015-07-28 Thread Joe Della Barba via CnC-List
Cavco canvas 305 481 3443. Ted Cavender. Kent island Sent from my iPhone > On Jul 28, 2015, at 10:04, Joel Aronson via CnC-List > wrote: > > Dan, > > Thanks for the referral. I'll mention your name! > > Joel > >> On Tue, Jul 28, 2015 at 10:02 AM, Daniel Sheer via CnC-List >> wrote: >>

Re: Stus-List Universal Engine panel wiring

2015-08-11 Thread Joe Della Barba via CnC-List
. Been working great for 3 years now. I learned this trick with my old Porsche after the 12th time I had to climb under it and short the starter connections. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-b

Re: Stus-List 34+ boom rigging Q's

2015-08-14 Thread Joe Della Barba via CnC-List
My 35 Mk 1 heaves to quite well. I made lunch that way once. Joe Coquina Sent from my iPhone > On Aug 14, 2015, at 13:26, Jean-Francois J Rivard via CnC-List > wrote: > > Hi Dave, > > You are correct, there's no additional purchase on the outhaul (There should > be)and the 2 additional sh

Re: Stus-List Raw water intake fouling A4

2015-08-20 Thread Joe Della Barba via CnC-List
External strainers are rare on sailboats because of drag. I have no strainer inside or out. I rarely have issues, but one a FISH made it all the way to the water pump and got stuck there. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK

Re: Stus-List Subject: Was Wire Gauge, now Where can I get LED?

2015-08-21 Thread Joe Della Barba via CnC-List
make LED red over greens, since they can used with the deck lights and the tricolor cannot. Here on the Chesapeake running under just a tricolor is a very good way to get run over by a powerboat. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35

Re: Stus-List Was Wire Gauge, now Where can I get LED?

2015-08-22 Thread Joe Della Barba via CnC-List
Lights that look like AquaSignal 25s with build in LEDs are all over FleaBay if you look. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Marek Dziedzic via CnC-List Sent: Saturday,

Re: Stus-List Ham Radio Demo

2015-09-03 Thread Joe Della Barba via CnC-List
I should be able to. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I 73 de N3HGB M/M From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jerome Tauber via CnC-List Sent: Thursday, September 03, 2015 8:09 AM To: cn

Re: Stus-List Windows laptop for chartplotter?

2015-09-11 Thread Joe Della Barba via CnC-List
-180 I am trying to figure out how to mount. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> COQUINA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ & Melody via CnC-List Sent: Friday, September 11, 2015 12:25 AM To: cnc-list@cnc-l

Re: Stus-List - Inflable life jacket with harness recommendation

2015-09-15 Thread Joe Della Barba via CnC-List
+1 for Spinlock. I wear it more than my old one because it is far more comfortable. Joe Della Barba COQUINA j...@dellabarba.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Andrew Burton via CnC-List Sent: Tuesday, September 15, 2015 7:05 PM To: cnc-list@cnc

Re: Stus-List Bow Thrusters

2015-09-27 Thread Joe Della Barba via CnC-List
C&Cs are about the last boats that need bow thrusters IMHO. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Knowles Rich via CnC-List Sent: Sunday, September 27, 2015 10

Re: Stus-List Battery chargers.

2014-08-31 Thread Joe Della Barba via CnC-List
http://stores.ebay.com/The-ChargerGuy?_trksid=p2047675.l2563 This store seems to have good deals. I have an old metal TrueCharge that hasn't been made in a long time. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cn

Re: Stus-List Red light myth?

2014-09-19 Thread Joe Della Barba via CnC-List
plotter. I do not see how they can see even as far as the bow. Joe Della Barba Coquina C&C 35 MK I ___ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribi

Re: Stus-List Red light myth?

2014-09-19 Thread Joe Della Barba via CnC-List
Some airplanes use black lights and fluorescent paint on the instruments. I saw an airplane from Poland set up that way. Joe Della Barba j...@dellabarba.com Coquina -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Burt Stratton via CnC-List Sent

Re: Stus-List sailing under jib alone

2014-09-19 Thread Joe Della Barba via CnC-List
I can’t speak for all boats, but I have been doing this since the 1980s and the rig is still intact. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson vi

Re: Stus-List Red light myth?

2014-09-19 Thread Joe Della Barba via CnC-List
Not kidding at all. You won't see it unless you fly some stuff from what used to be Warsaw Pact nations. I have a maglight in my flight bag with an orange filter I use for night time map reading. Too many issues with color rendition using just the red light. Joe Della Barba j...@dellabarb

Re: Stus-List sailing this weekend

2014-10-17 Thread Joe Della Barba via CnC-List
Saturday > night, so the plan is to go to Baltimore and then sail home with 15 knots on > the stern Sunday. We were going to go to Saint Michaels, but the forecast is > uphill both ways and I don’t trust Kent Narrows with a strong northerly. > > Joe Della Barba > Coquina &

Re: Stus-List Running Lights >Approved LED bulbs

2014-11-01 Thread Joe Della Barba via CnC-List
around. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S via CnC-List Sent: Saturday, November 01, 2014 10:39 AM To: Bill Bina - gmail; CNC boat owners, cnc-list Subject: Re: Stu

Re: Stus-List Lions and tigers and bears, Oh My>Was Approved LED bulbs

2014-11-08 Thread Joe Della Barba via CnC-List
But where can you FIND a red over green? Joe Della Barba Coquina -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Sent: Saturday, November 08, 2014 1:22 PM To: 'Ronald B. Frerker'; cnc-list@cnc-list.com Subject: Stus-

Re: Stus-List 35-1 drivetrain replacement (prop, engine HP, transmission ratio)

2014-11-09 Thread Joe Della Barba via CnC-List
This is why I got another A4. I could not figure out how to get a decent prop for a reduction gear engine without extending the shaft. Joe Della Barba j...@dellabarba.com Coquina C&C 35 MK I -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Carl Ger

Re: Stus-List Exhaust hose replacement for 33-1

2014-11-12 Thread Joe Della Barba via CnC-List
A hole saw and an access port will cost about 1% of the yard bill for someone to take a bunch of stuff apart and get back there. Just sayin' Joe Della Barba Coquina -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of ahycrace--- via CnC-List

Re: Stus-List Exhaust mixing elbow

2014-11-15 Thread Joe Della Barba via CnC-List
esel exhaust corrodes through the copper pipe those were made of. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> COQUINA C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht via CnC-List Sent: Saturday, November 15, 2014 9:27

Re: Stus-List Winter worries

2014-11-20 Thread Joe Della Barba via CnC-List
ns up. Joe Della Barba j...@dellabarba.com -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jake Brodersen via CnC-List Sent: Thursday, November 20, 2014 9:09 PM To: 'Tom Buscaglia'; cnc-list@cnc-list.com Subject: Re: Stus-List Winter worries Tom,

Re: Stus-List 35-1 for sale

2014-11-21 Thread Joe Della Barba via CnC-List
tank appears to be missing, as does the stove. 13 HP is a bit light in the HP department too. This is going to be a tough sell for anyone not 100% a racer. Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cn

<    1   2   3   4   5   6   7   8   >