erything was settled, I could see a visible "grid" on the starboard side
> of the hull above the waterline, 3 feet tall and about 6 feet wide.
> >>>
> >>> Should I be worried?
> >>>
> >>>
> >>> All the best,
> &g
Nah, it is from when he turned on the Corbomite Device... that thing
always causes print through!
Graham Collins
Secret Plans
C&C 35-III #11
Dennis C. wrote:
The grid probably emerged when you overheated the dilithium crystals.
Dennis
Sent from my iPhone
On Oct 22, 2012, at 2:30 PM, Edd Sc
The grid probably emerged when you overheated the dilithium crystals.
Dennis
Sent from my iPhone
On Oct 22, 2012, at 2:30 PM, Edd Schillay wrote:
> Dennis,
>
> Never noticed it before Saturday -- could have been there all along. My
> head was less than a foot away and it was probably
Dennis,
Never noticed it before Saturday -- could have been there all along. My
head was less than a foot away and it was probably only visible because the way
the light was hitting it.
But, for those on the list who thought it had something to do with the
holodeck or transpor
Hi Edd,
Our hull is painted dark blue and you can see a little of the grid pattern
in places. You have to look just so, usually from below when the boat is
out of the water. I can't see it in the summer when the boat is in.
Ken H.
On 22 October 2012 13:45, Edd Schillay wrote:
> Listers,
>
>
Edd,
If the pattern is a square weave of approx 1/4" threads, then it's the roving
showing through the gel coat and skin out (matte) coat due to post-cure
shrinkage. It's cosmetic.
Too bad we couldn't look at it at Mystic. Could have told you for sure.
What many don't know is our plastic bo
...or was it burn in left over from your holodeck?
-- Original Message --
From: William Hall
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Visible "grid" on the side of my C&C 37+
Date: Mon, 22 Oct 2012 13:11:23 -0400
Might be from poor calibration of your tel
@gmail.com> chris.d...@gmail.com
www.duer.co
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd
Schillay
Sent: Monday, October 22, 2012 1:27 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Visible "grid" on the side of my C&C 37+
Very possible. It&#x
As the gel coat wears away, you can start to see the fiberglass fibers. Matte
would have a random pattern. Since it's a grid, it sounds like roving, which is
the glass layer that is usually laid up on top of the layer of matte (for
strength). Did your boat ever have any fiberglass repair done to
Very possible. It's not often that I get my face so close to the side.
David Risch -- thanks. That's what I thought, but wanted to be sure.
All the best,
Edd
Edd M. Schillay
Starship Enterprise
C&C 37/40+ | Sail No: NCC-1701-B
City Isla
I wonder whether it could be the core printing through. Is it possible it
was there before and you didn't notice it?
On Mon, Oct 22, 2012 at 1:16 PM, Edd Schillay wrote:
> Maybe 2" by 3". Looks like something that was used in the construction of
> the boat.
>
> All the best,
>
> Edd
>
>
> Edd
From: e...@schillay.com
Date: Mon, 22 Oct 2012 13:16:28 -0400
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Visible "grid" on the side of my C&C 37+
Maybe 2" by 3". Looks like something that was used in the construction of the
boat.
All the best,
Edd
Maybe 2" by 3". Looks like something that was used in the construction of the
boat.
All the best,
Edd
Edd M. Schillay
Starship Enterprise
C&C 37/40+ | Sail No: NCC-1701-B
City Island, NY
Starship Enterprise's Captain's Log Webs
Might be from poor calibration of your teleporter.
Bill
On Mon, Oct 22, 2012 at 12:45 PM, Edd Schillay wrote:
> Listers,
>
> We hauled the Enterprise Saturday afternoon (so sad) and once everything
> was settled, I could see a visible "grid" on the starboard side of the hull
> above the waterli
-List Visible "grid" on the side of my C&C 37+
I would be worried...
In a message dated 10/22/2012 12:48:02 P.M. Eastern Daylight Time,
joel.aron...@gmail.com writes:
How big were the rectangles?
Joel Aronson
On Oct 22, 2012, at 12:45 PM, Edd Schillay wrote:
Lister
I would be worried...
In a message dated 10/22/2012 12:48:02 P.M. Eastern Daylight Time,
joel.aron...@gmail.com writes:
How big were the rectangles?
Joel Aronson
On Oct 22, 2012, at 12:45 PM, Edd Schillay <_edd@schillay.com_
(mailto:e...@schillay.com) > wrote:
Listers,
We haul
How big were the rectangles?
Joel Aronson
On Oct 22, 2012, at 12:45 PM, Edd Schillay wrote:
Listers,
We hauled the Enterprise Saturday afternoon (so sad) and once everything
was settled, I could see a visible "grid" on the starboard side of the hull
above the waterline, 3 feet tall and about
Listers,
We hauled the Enterprise Saturday afternoon (so sad) and once
everything was settled, I could see a visible "grid" on the starboard side of
the hull above the waterline, 3 feet tall and about 6 feet wide.
Should I be worried?
All the best,
Ed
18 matches
Mail list logo
