My C&C 35 has a metal stamped plate below the wheel on the pedestal showing the
model, year and serial number.
- Original Message -
From: Veiko Piirsalu via CnC-List
To: cnc-list@cnc-list.com
Cc: Veiko Piirsalu
Sent: Tue, 14 Aug 2018 09:16:35 -0400 (EDT)
Subject: Stus-List C&C30E hull
Paul
Neil is correct there are more modern materials available so worth looking
into. I'll admit I'm a bit old school so what follows is what I've used for
many years and am most comfortable with.
For repairs such as this to replace wet / rotten balsa core I've stayed with
balsa but also have
Dan
On my first boat, an O'Day 25 I de-masted after tacking in strong winds due to
a leaking chain plate on the port side shroud that over many year (I suspect)
had rotted the wooden bulkhead the chain plate was bolted to.
Unfortunately due to the design it was almost impossible to detect and I
Mine came with a Ritchie Globemaster as well.
James
Flamingo IV
C&C 35-1
- Original Message -
From: "Joe via CnC-List Della Barba"
To: cnc-list@cnc-list.com
Cc: "Joe Della Barba"
Sent: Tuesday, April 17, 2018 10:45:55 AM
Subject: Re: Stus-List [EXTERNAL] Re: Ship's Compass
Lisle
I co-own C&C 29 Mk II, s/n 001, White Magic. See the following link for more 29
MkII info (if you look close the brochure pictures are of White Magic!)
http://www.frontiernet.net/~markvii/index.htm
Sail her in fresh water on Lake Winnipeg (6th largest lake in North America) in
Manitoba,
To bad they changed in on the Mk II, it has to be due to the different rudder
on the Mk II.
It works well on my 35 Mk I (I tested it to make sure it worked) but as you
noted it is in front of the steering column on the Mk I.
On the 29 Mk II (had one of those too) it is aft of the pedestal and
To clean and kill any mold on wood in the boat I’ve always used a 50/50 water
and vinegar mix. Has worked well for me.
Cheers
James.
C&C 35 Mk1
- Original Message -
From: David Castor via CnC-List
To: cnc-list@cnc-list.com
Cc: David Castor
Sent: Sat, 10 Feb 2018 11:52:57 -0500 (EST)
Jeff
Thanks for the recommendation for zephyrwerks.
Cheers, James
- Original Message -
From: "Jeffrey Nelson via CnC-List"
To: cnc-list@cnc-list.com
Cc: "Jeffrey Nelson"
Sent: Sunday, December 10, 2017 7:35:26 AM
Subject: Re: Stus-List new haylards
When I replaced my halards
a PVC tube through a
hole. I use that for the whisker pole topping lift.
https://drive.google.com/file/d/1axg6mSDjplwNf8AYS_2LHg9KBEM_ijMR8A/view?usp=sharing
Neil Gallagher
Weatherly, 35-1
Glen Cove, NY
On 12/11/2017 10:05 PM, Jim via CnC-List wrote:
Neil
If you have any pictures
, and put a kind of smaller winch on the
aft end of the deckhouse. It's worked fine so far, though the backing under
turning blocks wasn't done well, just screws and washers to the underside of
the liner. That's been on my list.
Neil Gallagher
Weatherly, 35-1
Glen Cove, NY
ep3_LqsCzqnnNYUtU6OPFDGGeMoeA3jo
I upgraded the cabin top winches to Barient 22's. That required strengthening
the deck under the winches. I epoxied additional layers of roving in the
access.
You're welcome to contact me for any details.
Dennis C.
Touche' 35-1 #83
Mandevill
I have a '71 C&C 35 Mk1 with the original 100% wire main halyard to wire winch
beside the mast.
In February I purchased 8mm (5/16") New England VPC to replace the wire halyard
but have not yet as I believe I need to replace the mast head sheave (mast
still up), remove winch, run line back to th
Glen
When I originally bought my C&C35 Mk1, sn 75, I thought it was missing the
controls for the side mounted (not on pedestal) Morse Controls and tried to
find some new or used and had no luck in the search.
Luckily I found the original set of handles for the Morse Control throttle /
f-rev sh
I just replaced my wire lifelines with dynemma. I also bought the lifeline
hardware/turnbuckles that allowed me to work eye slices. It created a very
finished and upgraded look. Am very happy with it so far.
> On Aug 31, 2017, at 12:00 PM, cnc-list-requ...@cnc-list.com wrote:
>
> Send CnC-List
I have a 1971 C&C 35 mk1 with an old style rig tension gauge (see pics as
follow https://www.dropbox.com/sc/y2fsam4l5vrvz7v/AAAzwvyuC7njm3lEGi3xNJ1Sa
Anyone have instructions on how to use this old style gauge?
It has a scale reading from 1 to about 3.
Cheers, James
- Original Messa
ng Company and was pretty
> satisfied with their service.
> https://theriggingco.com/
>
>> On Mon, May 15, 2017 at 12:24 PM Jim via CnC-List
>> wrote:
>> Hi group:
>>
>> I need rigging repairs to my 29 located on the northern Chesapeake. I
>> reache
Hi group:
I need rigging repairs to my 29 located on the northern Chesapeake. I reached
out to Walden rigging, the only riggers I know of, around here, who have a
great rep. Sadly they are so busy, it may be late July before I will be able to
get my repairs done and use my boat.
There are a bu
I second that question and am also curious as to how she sails with the
straight blade vs the original swept scimitar rudder?
James
Flamingo IV
C&C 35 Mk1
- Original Message -
From: "Joe via CnC-List Della Barba"
To: cnc-list@cnc-list.com
Cc: "Joe Della Barba"
Sent: Thursday, Ma
I use Bed-It-Butyl tape which has been noted by others on this post.
James Neirinck
C&C 35 MK1
Flamingo IV
Lake of the Woods, Ontario
- Original Message -
From: "Chuck Saur via CnC-List"
To: cnc-list@cnc-list.com
Cc: "Chuck Saur"
Sent: Tuesday, May 9, 2017 7:23:34 AM
Subject:
I agree with Mike and had the same issue that I repaired on my previous O'Day
25. My approach was to cut from the top and did a combination of re-use the
cut piece of fiberglass and put in new matting. Key is to get all the old wet
and rotting balsa out and replace with new balsa / plywood (m
s on how I should use the tension gauge?
Cheers, James Neirinck
C&C 35 Mk1, Flamingo IV
- Original Message -
From: "Neil Schiller via CnC-List"
To: "Jim via CnC-List"
Cc: "Neil Schiller"
Sent: Monday, April 24, 2017 9:13:29 PM
Subject: Re: St
Getting my 'new to me last fall' C&C 35 mk 1 ready for spring launch and am
looking for input on the traveler track width (see pic in attached dropbox
link) and what the purpose is for a tool that I found on the boat (see pic in
attached dropbox link).
>From the traveler track picture you can s
I just purchased a 1971 C& C 35 Mk 1 (and just joined this users group!) and am
looking for an owners manual for this sailboat.
There are C&C owners manuals for other sizes of C&C boats but not for the 35ft
Mk1 it seems. So any assistance in print or pdf is greatly appreciated.
Cheers, Jim Neir
23 matches
Mail list logo
