?
>
I've tried to make a backup of "new" FD (2.4.x) on "old" DIR and SD (1.38.x)
and it doesn't work, due to protocol differences between old and new
version. So I had to upgrade both DIR and SD. I can assume that it won't
work in opposite direcrion, too.
h "one job per volume" feature. Then You will get as many new or
recycled volumes as jobs. So, finally You will replicate only last altered
volumes with a size of made backups.
bye
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
catalog, etc.).
>
No. All copies goes to database as well, but they are indirectly available
for restore and are promoted as a main backup only when original job
expire. I could be wrong about it, but it was working as described last
time I've check.
best
e
> # %o = command (unload|load|loaded|list|slots)
> # %S = slot index (1-based)
> # %a = archive device (i.e., /dev/sd* name for tape
> drive)
> # %d = drive index (0-based)
> }
>
> Device {
you have no changes made between Saturday till Sunday or you are
happy to lose those changes. To avoid this you should add another
Incremental level backup on Sunday before or after a full backup or switch
to Virtual
Hello,
2014-11-05 15:37 GMT+01:00 Bryn Hughes :
> In particular pay attention to the '%util'
>
It is valid _only_ for single spindle direct attached disk. For others you
shouldn't count on it.
best regards
--
Radosław Korzeniewski
rado
: has a native ACL support that allows the restore
> self-service, but no native AD/LDAP integration. Maybe it can be
> accomplished with Apache + AD.
>
>
Reportula (www.reportula.org) has an AD/LDAP integration buildin.
best regards
--
Radosław Korzenie
ld I instead
> try something like Web-Bacula to do some reporting?
>
> I am currently receiving mails for 6 jobs per day. Rising to 8 soon.
>
>
I have about hundred from only one system :) so 8 is not a big deal. :)
--
Radosław Korze
table) you expecting, but it is there.
What particular feature are you looking for? There are dozen of features
and functionalities in Bacula.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Download BIRT
y data? Anyone has done queries that could share?
>
Changing job dates (start,end, etc.) is simple when you bother catalog data
only. The other case are dates written to the volumes.
> 3. Whatever you suggest.
>
Application specific backups. :)
best regards
--
Ra
e format like gzip.
It does not have a temporary files checksumming like any other application
(I suppose, I did not check all other).
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Download BIRT iHub F-Type
Backup10 10-Dec-14 19:05H44Job
> SERVER-H44Inc-2014-1123-1272-232
>
> Full Backup10 11-Dec-14 05:00
> CatalogBackup *unknown*
>
>
Why do you think it stuck. Above you have a statu of scheduled jobs to run
in the future not an actual status of runn
OK.
>
Not a solution, but a guess: check if you have enough space available on
/tmp filesystem.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIR
card or driver, etc...
You have to check it all progressively.
best regrds
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a
;
> No. Good guess, but the storage is a vchanger and it's working just fine.
>
>
If you are using a vchanger then I guess it is a disk only backup, so why
do you spool data? It is not required but making you backup slow down at
least 2 times then standard job. You can define an
Hello,
2015-01-23 20:04 GMT+01:00 Dimitri Maziuk :
> On 01/23/2015 12:22 PM, Radosław Korzeniewski wrote:
>
> > If you are using a vchanger then I guess it is a disk only backup, so why
> > do you spool data? It is not required but making you backup slow down at
> > lea
ool disk is just a variation on
> that theme.
>
Data spooling is not working like cache or proxy. It is a different
mechanism designed only for tapes. If you do not backup to tapes do not use
data spooling.
best regards
--
Radosław K
Hello,
2015-01-23 21:42 GMT+01:00 Dimitri Maziuk :
> On 01/23/2015 02:33 PM, Radosław Korzeniewski wrote:
>
> > No, it is not working as you described.
> > Data spooling will read stream from the client, then write it to the
> > temporary disk file, then during despool
Hello,
2015-01-23 21:36 GMT+01:00 Josh Fisher :
>
> On 1/23/2015 2:33 PM, Heitor Faria wrote:
> >> On 01/23/2015 12:22 PM, Radosław Korzeniewski wrote:
> >>
> >>> If you are using a vchanger then I guess it is a disk only backup, so
> why
> >>&g
Hello Kern,
2015-01-25 11:56 GMT+01:00 Kern Sibbald :
> On 23.01.2015 19:22, Radosław Korzeniewski wrote:
>
> Hello,
>
> 2015-01-22 3:42 GMT+01:00 Dimitri Maziuk :
>
>> On 01/21/2015 06:41 PM, Bill Arlofski wrote:
>>
>> > Bacula has a hard-coded 6
ugin_license);
I'm not talking here about Bacula Enterprise because it has a different
license.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Dive into the World of Parallel Programming. The Go Paralle
GPLv3") != 0 &&
>strcmp(info->plugin_license, "AGPLv3") != 0) {
> Jmsg(NULL, M_ERROR, 0, _("Plugin license incompatible. Plugin=%s
> license=%s\n"),
>plugin->file, info->plugin_license);
>
> I'm not talking her
ope it helps.
Best regards
P.S. I was facing this feature in Bacula Enterprise and it was fixed in
these release.
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Dive into the World of Parallel Programming. The Go
ile. Then simple @output in the bconsole to switch output to screen. You
can use a @tee command to make an output to the file and scrren in the same
time.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
ual-
> event?utm_
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
> ___
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
--
Radosław Kor
it
> mystified, because this flies in the face of my previous understanding of
> the whole idea of a differential backup.
>
>
First - UPGRADE YOUR BACULA DIRECTOR/STORAGE! it is more then 5 years
old!!! :)
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
create error.
>
> Can anyone tell me how I can get around this error?
>
>
Check a database engine logs what was a cause of the error.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
One dashb
t a specific conditions) you get the
same number of files backed up in Incremental and Differential levels.
>
> In the meanwhile, I'll probably just stop using differentials.
>
>
:)
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
---
No, I can't. It is not safe to use "Ignore FileSet Changes = yes" unless
you are very sure what are you doing. The accurate mode doesn't matter in
this case.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
---
files
to backup. If you make this king of configuration you should know what you
are doing.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
One dashboard for servers and applications across Physical-Virtua
gt;
>
Or Global Endpoint Deduplication :)
Different algorithm but the same or better storage performance.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
One dashboard for servers and applications ac
younger then Kern but I
remember a 40MB hard disk drives with a dedicated I/O board.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
One dashboard for servers and applications across Physical-Virtual-Cl
Hello. Could you send your job log with error. It should describe what is
going on.
Best regards
9 cze 2015 12:09 PM "More, Ankush" napisał(a):
> Hi Pavel,
>
>
>
> We didn't find any error in VSS list writers all the VSS writers are
> stable and no error in event log.
> All the windows 2003 ser
"Microsoft Exchange Writer", State: 0x1
> (VSS_WS_STABLE)
>
> VSS Writer (BackupComplete): "Event Log Writer", State: 0x1 (VSS_WS_STABLE)
>
> VSS Writer (BackupComplete): "IIS Metabase Writer", State: 0x1
> (VSS_WS_STABLE)
>
> VSS Writer (BackupComp
for that information. If there is another
> hidden information behind it I suggest to rephrase the text or else to
> remove it.
>
>
This suggestion should go to developers mailing list, not users mailing
list.
be
ould show the last 45 days. Am I right?
>
For all your new volumes - Yes. For all your old volumes, nope, unless you
update your volumes parameters with bconsole->update command. In both cases
you will need to wait 45 days to check if it is working correctly.
h will take more
time again.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that mo
Hello,
2015-06-27 17:56 GMT+02:00 Heitor Faria :
> I wonder if the thread starter (SPQR) solved his problem.
> The discussion became hot and he flew. lol
>
As always on the Internet. :)
all the best
--
Radosław Korzeniewski
rados...@korzeni
gt; For your information OS is CentOS Ver 6.6 on KVM and cpu assigned only one to
> this host.
> CPU is AMD Athlon 5350。4core、TDP２５W、２GHｚ(DB is mysql ver 5.1.73)
> Appliciate your kind help.
>
> Check your utilization first - cpu, i/o, memory. Next do the d
Hi,
2015-07-03 17:45 GMT+02:00 Ana Emília M. Arruda :
> You´re welcome Jakubek :-)
>
I think Jakubek is a last name. The first name is Jakub.
best regards to all
--
Radosław Korzeniewski
rados...@korzeniews
+
1,906,548 files inserted into the tree.
No files selected to be restored.
You have messages.
real 0m24.743s
user 0m0.028s
sys 0m0.000s
So it took 24 seconds to handle almost 2M files restore. It is a 5Y old
small server with a postgresql database.
our own.
When you invoke your script with Run Before Job directive it is executed
from Director (usualy run with bacula account) not a File Daemon (which
usualy run with root permissions).
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
h different
clients and filesets in you archive. :)
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
___
Bacula-users mailing list
Bacula-users@lists.sourceforg
Hello,
2015-07-27 12:59 GMT+02:00 Luc A :
> Dear reader,
>
> Is there a way to browse through an Bacula made backup files like browsing
> throught a RAR file with WinRAR??
>
>
Yes. Use bls for that. When you need to extract something you can use
bextract for that.
best re
t a bsr
file.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/li
ile, I
can respond a virtual machine disk image. :)
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
___
Bacula-users mailing list
Bacula-users
"Diaria" (From Run Pool override)
> Catalog:"MyCatalog" (From Client resource)
> Storage:"StorageLocal1" (From Pool resource)
> Scheduled time: 30-Jul-2015 21:30:00
> Start time: 30-Jul-2015 21:30:04
> En
are turned off every day this doesn't happen
>
> Best Regards
> Wanderlei
>
> 2015-08-14 9:29 GMT-03:00 Radosław Korzeniewski >:
>
>> Hello,
>>
>> I see a duplication of logs only for messages generated from Bacula File
>> Daemon. So please check
gt; we can save space destined for backups.
>
Yes. I always perform a full backups daily for Bacula config and database
dump only. Simpler DR for Bacula itself. For every other Job I
ase show us
your bconsole->restore session.
And the most important. What is a purpose for your test? What do you
expect?
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Hello,
I'm not a native English speaker, so please forgive me that I do not
understand all your conversation. I do my best.
2015-08-24 18:44 GMT+02:00 Dimitri Maziuk :
> On 08/24/2015 10:12 AM, Radosław Korzeniewski wrote:
>
> >> Also, the most cases I had seen that needs a
Hello,
2015-08-24 23:31 GMT+02:00 Ana Emília M. Arruda :
> Hello Radoslaw,
>
> On Mon, Aug 24, 2015 at 12:12 PM, Radosław Korzeniewski <
> rados...@korzeniewski.net> wrote:
>
>> Hello,
>>
>> 2015-08-14 15:03 GMT+02:00 Ana Emília M. Arruda :
>>
>&g
which uses
this functionality for backup. The current development stalled because I'm
on vacation right now.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
___
Ba
ddle of the block. In this block only a few hundred
bytes are used. Then this kind of label is called prelabel which is
overwritten during a first backup job with a label and backup stream.
best regards
--
Radosław Korzeniewski
rados...@korze
rciless coding I think it would worth a try.
> =P
>
No. The Drive Index parameter is simply supplied into a mtx-changer script
to point a tape drive. If you have a library which has drive index starting
from i.e. 16 then you need to configure it that way. However, I never found
a r
esponsible for deleting.
No. Bacula is a recovery tool, not synchronization tool. When you restore
at a point in time (with Accurate option) that you always get a valid list
of files.
Yes. You can always delete all data on DR site and perform a full recovery
every time. Then you'll get what you
ointlessley
> filling up another 20 tapes just to get back to where we are now.
>
Let's imagine you are a Bacula and you've got a following situation
described above. How do you distinguish with 100% accuracy that new files
are the same as in prievous backup? Again, with 100%
ks, you need to not backup these symlinks and told Bacula to do so (a
special preparation of the fileset).
If you need to check a contents of the file before backup, then you will
read a file twice. You can resolve this using base jobs.
best regards
--
Radosław Korzeniewski
rados...@korz
---
>>
>> ___
>> Bacula-users mailing list
>> Bacula-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>>
>
>
> -
forge.net
> > https://lists.sourceforge.net/lists/listinfo/bacula-users
> >
>
>
>
> --
> ___
> Bacula-users mailing list
> Bacula-users@lists.sourceforg
tore*
>
>
The catalog has a lot of metadata information about the backup and volume,
i.e. a job table, file table, media table and the most important jobmedia
table where Bacula stores volume "physical" mappings of the backup. A
cloned tape could have
> all the backup jobs from the File pool to the Archive pool that have not
> yet been copied?
>
>
Use a PoolUncopiedJobs selection parameter not a SQLQuery. It will do all
what you want.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
-
nd it was gone
> (JobId 1609 and after I did another one JobId 1614)
>
What does it means "gone"?
Could you make a command: list jobid=1609 ? What is an output?
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
r_Windows1
>> 1259 Full 46.747 G OK 07-Sep-15 21:20
>> Backup_VM_Servidor_Windows2
>> 1605 Full 313.075 M OK 08-Sep-15 21:31
>> Backup_Host_Hyper-V
>> 1609 Full 44.578 G OK 08-Sep-15 22:11
>&g
LTO-5
>Archive Device = /dev/nst0
>
>Autochanger = yes
>Drive Index = 0
>
> #Hardware End of Medium = no
> # BSF at EOM = no
> # Backward Space Record = no
> # Fast Forward Space File = no
> # TWO EOF =
atus: Error
> SD termination status: Error
> Termination: *** Backup Error ***
>
> On Tue, 22 Sep 2015 20:17:07 +0300, Ana Emília M. Arruda <
> emiliaarr...@gmail.com> wrote:
>
> Hello,
>
> The recommendation for Bacula versions are:
>
> director = storage daemo
its networks. Any views expressed in this message
> are those of the individual sender, except where the message states
> otherwise and the sender is authorized to state them to be the views of any
> such entity.
>
> ------
>
&g
bsite. The Bacula Systems is not an online business.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
___
Bacula-users mailing list
Bacula-users@lists.sourcefor
. Check if you can
connect from any of your clients to the backup server on 9103 (it is a SD
port).
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
___
B
which was performed with this fileset, so
Bacula gives you information about it.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
___
Bacula-users
t;
No, when Bacula makes a connection (after succesful connect()) then any
disconnection will terminate a job with error status. It is not possible to
reconnect with current code.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
rprise Aligned Volumes format it is the only connection I
can use with external hardware deduplication storage.
This kind of setup is working without problems at some customers around the
world.
best regards
--
Radosław Korzeniewski
rados...@korzeniews
.
The signal is a value less then zero.
You need to verify what is going on on your network or servers.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
___
Ba
ormance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
>
t a valid value for DATETIME.
>
>
>
> Michael Munger, dCAP, MCPS, MCNPS, MBSS
> High Powered Help, Inc.
> Microsoft Certified Professional
> Microsoft Certified Small Business Specialist
> Digium Certified Asterisk Professional
> mich...@highpoweredhelp.com
>
>
>
&
and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
> ___
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-u
as version with
> the packagemanager.
> now.. how can i use this catalog schema with this "old" version. or how
> can i manuell update the package? I have no possibility to change the os.
>
>
You cannot downgrade a catalog database. All you can do is to upgra
device.
So, why do you get more then one job per storage device? Jut curious.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Find and fix application performance issues faster with Applications
for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> ___
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
>
ing Bacula 7.4.2
>
> Is this correct?
>
>
Yes, it is. From "restore" point of view it should be indistinguish from
standard Full.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
W
; is up to date.
> Catalog record for Volume "VXS021L6" is up to date.
> Catalog record for Volume "VXS022L6" is up to date.
> Catalog record for Volume "VXS023L6" is up to date.
>
>
> *list pool
> +----+--+-+-
Hello,
2016-08-08 11:39 GMT+02:00 Jan Gazda :
> Hello all,
>
>
>
> I’m new to bacula Version: 5.2.13 and we are running and I’m trying to
> make an automatic restore script to test the backup.
>
>
>
> But I have a problems how to pass the directory to the bacula “restore”
> command.
>
What direc
s in advance.
>
>
> --
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> ______
ract.
>
>
I like your above statements. :) Thumbs up!
I have a customer which have more than 500M files in the catalog which
grows to 150GB and using it with a standard (minimal) configuration. Any
operation takes ages. :) And he has two similar installation.
best regards
--
t;
Yes it does bu you should read documentation about recycling. When Bacula
cannot find a backup ready volume (volstatus = Append or Recycle/Purge)
then it perform a recycle procedure.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
-
ays use the hammer. :)
Just move data from one tape to other tape to the different (or dedicated)
pool. Then move the volume from this pool to the original pool with update
bconsole command, i.e.
$ update volume= pool=
simple and fast solution
best regards
--
Radosław Korzeniewski
rados..
that you may
> sustain as a result of viruses, incompleteness of this message,
> interception of this message, which may arise as a result of e-mail
> transmission.
>
> ----
> --
> Check out the vibrant tech community on one of the world's most
> e
e world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> ___
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
--
Radosław Korzen
# password for FileDaemon 2
> File Retention = 60 days # 60 days
> Job Retention = 6 months # six months
> AutoPrune = yes# Prune expired Jobs/Files
> }
>
> Is anyone here who had the same problems and found a solution?
>
Corr
> | 31,536,000 | 1 |0 | 0 |
> File | 2017-01-25 23:06:06 |
> | 33 | Local-0034 | Append| 1 | 10,992,083,321 |2
> | 31,536,000 | 1 |0 | 0 |
> File
is sent
> to this message class."
>
>
"Restored" are the messages from FD, so did you enabled it in your FD?
I tested it a long time ago (about Bacula 2.x) and it was working as
expected.
best regards
--
Radosł
ou can define as many devices as you want.
> Now i have created a priority 1 restore job for one of our clients
For restore jobs you should create a ReadOnly device which will be always
available.
best regards
--
Radosław Korzeniewski
r
ad...@baculum.baculus.pl/
>
>
Is it still working or have some problems?
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Check out the vibrant tech community on one of the world's most
enga
irectly, not in URI:
> http://baculum.baculus.pl/
>
> Best regards.
> Marcin Haba (gani)
>
> On 1 August 2017 at 12:10, Radosław Korzeniewski
> wrote:
> > Hello,
> >
> > 2015-06-23 7:17 GMT+02:00 Marcin Haba :
> >>
> >> Hello Heitor,
> >
ngle volume with
multiple jobs or single job per volume?
Every approach has its own pros and cons in management, performance and
usability.
I'm talking about disk based volumes, no tapes. With tapes you do not have
a such dilemma. :)
best
still running, so messages and Bacula behavior are correct, IMHO.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Check out the vibrant tech community on one of the world's most
engaging tech s
you want to use real deduplication, please use Bacula Enterprise
Deduplication. It compares blocks not files.
It is not possible (or totally useless) to make MD5 only based file level
deduplication.
best regards
--
Radosław Korzeniewski
rado
lease excuse my joke above. I can't stop to write it.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Check out the vibrant tech community on one of the world's most
engaging tech sites,
s in a common company with 1-5
>> maximum montly/yearly retention backups.
>>
>
> I repeat, how many times have *you* done it, how many tapes, and how much
> did it cost you? In hardware, your time, and energy bills?
>
>
I did it once. Does it counts?
best regards
--
are to makes the best.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
--
Check out the vibrant tech community on one of the world's most
engaging
1 - 100 of 792 matches
Mail list logo
