Re: [AFMUG] EPMP AP Defaulted, but invalid password

Default it again with the power plug method?  Maybe it's only at partial defaults. On 12/3/2019 7:03 PM, Nate Burke wrote: We had a cable on a tower that had come loose in some strong winds and rubbed through the jacket probably shorting out a bunch of wires inside the cat5 (not actually brea

Re: [AFMUG] will reverse POE fry an M5 Nanostation?

Most of the ePMP models are indeed polarity agnostic, as are airfibers and pretty much everything I've ever checked with a gigabit port. I'd be surprised if 450b wasn't. On Tue, Dec 3, 2019, 10:03 PM Ken Hohhof wrote: > It appears Nate was right, the Tycon POE does not seem to have damaged the >

Re: [AFMUG] EPMP AP Defaulted, but invalid password

Is there a way to tell, via Light sequence or something, if the default actually worked? I've tried several times over the years to do the default via power cycle, and I don't think it's ever worked for me, I always get fed up and go find something to stick in the reset hole. I even pulled ou

Re: [AFMUG] EPMP AP Defaulted, but invalid password

I only knew because it started getting DHCP when it had previously been static...but it definitely worked.  It did take me a few tries to get it right. On 12/4/2019 8:57 AM, Nate Burke wrote: Is there a way to tell, via Light sequence or something, if the default actually worked?  I've tried s

[AFMUG] EPMP 1000 Disable primary Ethernet port

Is there a way to disable the Ethernet on the primary port but leave the aux port active? You can Disable the Aux port, but there isn't a setting to disable the Primary port. I need to kill the traffic on the port that is providing the POE, but leave the aux port active. -- AF mailing list

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

This is a 2.4 unit on 3.5.6.but it looks like you can turn off the primary port. If that option isn't there on yours, what about disabling the switch port at the bottom or just unplugging it at the bottom? On 12/4/2019 9:19 AM, Nate Burke wrote: Is there a way to disable the Ethernet on

Re: [AFMUG] EPMP AP Defaulted, but invalid password

Evidently then Cambium didn't use the method where the GUI temporarily goes to Recovery Console, like on the newer 450 radios? -Original Message- From: AF On Behalf Of Nate Burke Sent: Wednesday, December 4, 2019 7:57 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] EPMP AP D

Re: [AFMUG] EPMP AP Defaulted, but invalid password

Correct.  ePMP pre-dates that. On 12/4/2019 9:37 AM, Ken Hohhof wrote: Evidently then Cambium didn't use the method where the GUI temporarily goes to Recovery Console, like on the newer 450 radios? -Original Message- From: AF On Behalf Of Nate Burke Sent: Wednesday, December 4, 2019 7

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

On Wed December 4 2019 08:28, Adam Moffett wrote: > This is a 2.4 unit on 3.5.6.but it looks like you can turn off the > primary port. > > If that option isn't there on yours, what about disabling the switch > port at the bottom or just unplugging it at the bottom? > > On 12/4/2019 9:19 AM, Nat

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

Thanks! I'm upgrading the firmware now, the radio was on 3.5.1 Ok, ready to pull my hair out now. Radios were on 3.5.1, just upgraded to 3.5.6. The 2.4 SM (nonGPS), has the option to disable the Ethernet port, but the 2.4ap (nonGPS) does not have that option. If the Radio is set as an AP, do

[AFMUG] Iris I/O radios

Question for the Borg: We are bidding on a large control project for an oil company in west Texas. Their engineering consulting group is from the Netherlands and are specking the Iris I/O Modbus radio that uses the 433.050 to 434.775 Mhz band. My pea brain tells me that is a licensed band set asid

Re: [AFMUG] EPMP AP Defaulted, but invalid password

4.4.2 will if you can get it to corrupt the firmware, but that may be limited to the 300 img On Wed, Dec 4, 2019 at 8:39 AM Adam Moffett wrote: > Correct. ePMP pre-dates that. > > > On 12/4/2019 9:37 AM, Ken Hohhof wrote: > > Evidently then Cambium didn't use the method where the GUI temporaril

Re: [AFMUG] Iris I/O radios

Without looking it up, that seems very familiar with an unlicensed band I used to create pagers for the trading floor of the Chicago Board of Trade. I think it is the garage door and car dongle band. From: Jaime Solorza Sent: Wednesday, December 4, 2019 10:31 AM To: AnimalFarm Microwave User

Re: [AFMUG] Iris I/O radios

After looking, it appears you need a ham license to use these. From: ch...@wbmfg.com Sent: Wednesday, December 4, 2019 10:42 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Iris I/O radios Without looking it up, that seems very familiar with an unlicensed band I used to create pag

Re: [AFMUG] Iris I/O radios

And as I think about it, my pagers were in the 300 MHz range I think. From: ch...@wbmfg.com Sent: Wednesday, December 4, 2019 10:42 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Iris I/O radios Without looking it up, that seems very familiar with an unlicensed band I used to cre

Re: [AFMUG] Iris I/O radios

Courtesy of the Google: https://www.edn.com/electronics-blogs/eye-on-iot-/4437311/Using-433-MHz-for-wireless-connectivity-in-the-Internet-of-Things From: AF On Behalf Of ch...@wbmfg.com Sent: Wednesday, December 4, 2019 9:42 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Iri

Re: [AFMUG] Iris I/O radios

These frequencies are for amateur radio licensed use in the 70 cm band. Jaime Solorza Wireless Systems Architect 915-861-1390 On Wed, Dec 4, 2019 at 8:43 AM wrote: > Without looking it up, that seems very familiar with an unlicensed band I > used to create pagers for the trading floor of the Ch

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

[image: image.png]This is on a gps 2.4. It would make sense to not be able to disable the ethernet on an AP as it would be inaccessible Here are some configs to dick with "mgmtIFEnable": "0", "networkLanEnabled": "1", "networkLan2Enabled": "1", probably"networkLanEnabled": "0", would disable

Re: [AFMUG] Iris I/O radios

Many years ago, i picked a spread spectrum signature in the 330-335 MHz range coming from WSMR area...very strong. Jaime Solorza Wireless Systems Architect 915-861-1390 On Wed, Dec 4, 2019 at 8:48 AM wrote: > And as I think about it, my pagers were in the 300 MHz range I think. > > *From:* ch..

Re: [AFMUG] Iris I/O radios

Interesting. To paraphrase the article: "Allowed under Part 15 for remote controls as long as transmission stops within 5 seconds of releasing the button." I wonder how that jives with a modbus radio. On 12/4/2019 10:48 AM, Ken Hohhof wrote: Courtesy of the Google: https://www.edn.com/ele

Re: [AFMUG] Iris I/O radios

thats what I am researching Jaime Solorza Wireless Systems Architect 915-861-1390 On Wed, Dec 4, 2019 at 9:02 AM Adam Moffett wrote: > Interesting. > > To paraphrase the article: "Allowed under Part 15 for remote controls as > long as transmission stops within 5 seconds of releasing the button.

Re: [AFMUG] Cambium cbrs and 450 training

I don't get it. Jaime Solorza Wireless Systems Architect 915-861-1390 On Tue, Dec 3, 2019 at 2:16 PM Adam Moffett wrote: > "The 450 lady" ? > > I thought my mom was in El Paso. > > > On 12/3/2019 4:13 PM, Steve Jones wrote: > > Just got out of this training. I don't know if they're going to do

Re: [AFMUG] Cambium cbrs and 450 training

My mom actually does live in El Paso.  That part is real. There may be nothing else to get.  I was just being absurd. On 12/4/2019 11:17 AM, Jaime Solorza wrote: I don't get it. Jaime Solorza Wireless Systems Architect 915-861-1390 On Tue, Dec 3, 2019 at 2:16 PM Adam Moffett

[AFMUG] Assistance needed with our first CNPilot install

Looking for a consultant to help us setup our first CNPilot install. We have (3) CNPilot e410 and (6) CNPilot E500 units. We have a simple indoor outdoor campus we need to setup for a customer with this gear. We are running CNMaesto on a VM internally and have done almost nothing with CNMaes

Re: [AFMUG] Iris I/O radios

I’d read the whole article, there’s something about repeated very short transmissions that must be 10 seconds apart, like an outdoor wireless thermometer, also power and antenna considerations that result in short range. From: AF On Behalf Of Jaime Solorza Sent: Wednesday, December 4, 201

Re: [AFMUG] Iris I/O radios

i did..thanks Jaime Solorza Wireless Systems Architect 915-861-1390 On Wed, Dec 4, 2019 at 9:29 AM Ken Hohhof wrote: > I’d read the whole article, there’s something about repeated very short > transmissions that must be 10 seconds apart, like an outdoor wireless > thermometer, also power and an

Re: [AFMUG] Cambium cbrs and 450 training

Me neither. Maybe he means the term “lady” is only used by previous generations. Like Jimmy Kimmel asking random people on the street if they knew what “malarkey” meant. Who says old white politicians are out of touch? I remember when my college roommate got married and they moved into the

Re: [AFMUG] Cambium cbrs and 450 training

What’s a bsurd? Is it like a lert? Does the world need more bsurds? From: AF On Behalf Of Adam Moffett Sent: Wednesday, December 4, 2019 10:20 AM To: af@af.afmug.com Subject: Re: [AFMUG] Cambium cbrs and 450 training My mom actually does live in El Paso. That part is real. There may be

Re: [AFMUG] Cambium cbrs and 450 training

I don't know, but it definitely needs more 450 Ladies. On 12/4/2019 11:42 AM, Ken Hohhof wrote: What’s a bsurd?  Is it like a lert?  Does the world need more bsurds? *From:* AF *On Behalf Of *Adam Moffett *Sent:* Wednesday, December 4, 2019 10:20 AM *To:* af@af.afmug.com *Subject:* Re: [AFMU

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

It looks like when the radio is in AP mode, (nonGPS Radio) then you can't disable the primary Ethernet port. I tried from the CLI, and it greyed out all the ethernet options in the GUI, but the radio still showed the LAN as up. On 12/4/2019 9:50 AM, Steve Jones wrote: image.pngThis is on a gp

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

Did I read that it was a point to point?  Can reverse roles so the AP is on the other end? On 12/4/2019 1:00 PM, Nate Burke wrote: It looks like when the radio is in AP mode, (nonGPS Radio) then you can't disable the primary Ethernet port.  I tried from the CLI, and it greyed out all the ethe

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

ooh, that's a good idea! On 12/4/2019 12:16 PM, Adam Moffett wrote: Did I read that it was a point to point? Can reverse roles so the AP is on the other end? On 12/4/2019 1:00 PM, Nate Burke wrote: It looks like when the radio is in AP mode, (nonGPS Radio) then you can't disable the prima

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

Apparently disabling the primary disables 'BOTH' ports. Looks like the truck is rolling. On 12/4/2019 12:32 PM, Nate Burke wrote: ooh, that's a good idea! On 12/4/2019 12:16 PM, Adam Moffett wrote: Did I read that it was a point to point? Can reverse roles so the AP is on the other end?

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

ouch, no access at all? assuming you changed ap/sm mode to change this? On Wed, Dec 4, 2019 at 12:47 PM Nate Burke wrote: > Apparently disabling the primary disables 'BOTH' ports. Looks like the > truck is rolling. > > On 12/4/2019 12:32 PM, Nate Burke wrote: > > ooh, that's a good idea! > > On

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

I did use the 'test settings' function on the EPMP when I disabled the Ethernet, so it came back up after a couple minutes. I did however forget to check 'manage via Ethernet and Wireless' on the radio I made the new AP before I rebooted it, so I can't get into it anymore. So at least it's wo

Re: [AFMUG] EPMP 1000 Disable primary Ethernet port

fyi, we have preconfig files for all devices. we go through and configure everything as an AP and set the settings, then as an SM and set the settings. It will save through version changed, that manage from both is one of those settings, after having done just that enough times On Wed, Dec 4, 2019