fyi, we have preconfig files for all devices. we go through and configure everything as an AP and set the settings, then as an SM and set the settings. It will save through version changed, that manage from both is one of those settings, after having done just that enough times
On Wed, Dec 4, 2019 at 1:15 PM Nate Burke <n...@blastcomm.com> wrote: > I did use the 'test settings' function on the EPMP when I disabled the > Ethernet, so it came back up after a couple minutes. I did however forget > to check 'manage via Ethernet and Wireless' on the radio I made the new AP > before I rebooted it, so I can't get into it anymore. > > So at least it's working again, I just lost management to the far radio, > since it's now in AP mode. > > On 12/4/2019 12:54 PM, Steve Jones wrote: > > ouch, > no access at all? assuming you changed ap/sm mode to change this? > > On Wed, Dec 4, 2019 at 12:47 PM Nate Burke <n...@blastcomm.com> wrote: > >> Apparently disabling the primary disables 'BOTH' ports. Looks like the >> truck is rolling. >> >> On 12/4/2019 12:32 PM, Nate Burke wrote: >> >> ooh, that's a good idea! >> >> On 12/4/2019 12:16 PM, Adam Moffett wrote: >> >> Did I read that it was a point to point? Can reverse roles so the AP is >> on the other end? >> >> >> On 12/4/2019 1:00 PM, Nate Burke wrote: >> >> It looks like when the radio is in AP mode, (nonGPS Radio) then you can't >> disable the primary Ethernet port. I tried from the CLI, and it greyed out >> all the ethernet options in the GUI, but the radio still showed the LAN as >> up. >> >> On 12/4/2019 9:50 AM, Steve Jones wrote: >> >> [image: image.png]This is on a gps 2.4. It would make sense to not be >> able to disable the ethernet on an AP as it would be inaccessible >> Here are some configs to dick with >> "mgmtIFEnable": "0", >> "networkLanEnabled": "1", >> "networkLan2Enabled": "1", >> >> probably "networkLanEnabled": "0", would disable the port >> >> Thats if you download the json, edit it and upload it, or push it from >> cnmaestro. I dont know the syntax for CLI >> >> >> >> On Wed, Dec 4, 2019 at 9:01 AM Nate Burke < <n...@blastcomm.com> >> n...@blastcomm.com> wrote: >> >>> Thanks! I'm upgrading the firmware now, the radio was on 3.5.1 >>> >>> Ok, ready to pull my hair out now. >>> >>> Radios were on 3.5.1, just upgraded to 3.5.6. The 2.4 SM (nonGPS), has >>> the option to disable the Ethernet port, but the 2.4ap (nonGPS) does not >>> have that option. >>> If the Radio is set as an AP, does that option go away? >>> >>> AP Radio (EPMP1000 NonGPS) >>> >>> SM Radio (EPMP1000 NonGPS) >>> >>> >>> >>> >>> It's an interesting setup, CustomerA provides POE and is connected via >>> Ethernet to the 2.4 radio. The Aux Port of the 2.4 radio powers a 5ghz >>> Feed radio. Customer B connects via RF to the 2.4 radio. CustomerA isn't >>> paying their bill, so I need to turn them off. >>> >>> CustomerB owns the house of CustomerA, so I'm not worried about them >>> getting pissed off and unplugging it, as CustomerB can just go plug it in >>> again. >>> >>> On 12/4/2019 8:28 AM, Adam Moffett wrote: >>> >>> This is a 2.4 unit on 3.5.6.....but it looks like you can turn off the >>> primary port. >>> >>> If that option isn't there on yours, what about disabling the switch >>> port at the bottom or just unplugging it at the bottom? >>> >>> >>> On 12/4/2019 9:19 AM, Nate Burke wrote: >>> >>> Is there a way to disable the Ethernet on the primary port but leave the >>> aux port active? You can Disable the Aux port, but there isn't a setting >>> to disable the Primary port. I need to kill the traffic on the port that >>> is providing the POE, but leave the aux port active. >>> >>> >>> >>> >>> >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> >> >> >> >> >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
