Correct. ePMP pre-dates that.
On 12/4/2019 9:37 AM, Ken Hohhof wrote:
Evidently then Cambium didn't use the method where the GUI temporarily goes
to Recovery Console, like on the newer 450 radios?
-----Original Message-----
From: AF <af-boun...@af.afmug.com> On Behalf Of Nate Burke
Sent: Wednesday, December 4, 2019 7:57 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Subject: Re: [AFMUG] EPMP AP Defaulted, but invalid password
Is there a way to tell, via Light sequence or something, if the default
actually worked? I've tried several times over the years to do the default
via power cycle, and I don't think it's ever worked for me, I always get fed
up and go find something to stick in the reset hole. I even pulled out my
stopwatch to time the power on/off sequence.
On 12/4/2019 7:26 AM, Adam Moffett wrote:
Default it again with the power plug method? Maybe it's only at
partial defaults.
On 12/3/2019 7:03 PM, Nate Burke wrote:
We had a cable on a tower that had come loose in some strong winds
and rubbed through the jacket probably shorting out a bunch of wires
inside the cat5 (not actually breaking). Remarkably, the Ethernet
port on the mikrotik was still negotiating 1G, even through there was
no RX Traffic from the AP. When we got the cable fixed, the EPMP AP
(1000 series) appears to be at default settings, but I can't log into
it. The Login page comes up, but it returns invalid user/password.
I'm trying admin/admin. The AP is at it's default name in a Neighbor
list, and it's requesting a DHCP Address which is not how it was
before the cable problem. SSH doesn't allow login either. Tried
setting the AP to different IP Addresses via DHCP, and can always get
to the HTTP Page, but can't log in.
We tried doing the default via power sequence on the tower before
replacing it, and that didn't seem to help. (Of course there's no way
to see if it actually worked either) Is there anything I should look
at before trying a reset via the reset button on the bench?
When we first got the cable replaced, the AP grabbed a public DHCP
Address, Could it have been hacked in the 10 minutes it was on that
public IP Address? Are there cambium scanning bots flying around the
interwebs. Or do the SSH Commands for login and changing the
password match some other bot scan.
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
