not sure about NT, but in unix, you can enter a line in the
dsm.sys file that will execute a command/script for you
POSTSCHEDULECMD /auscmvc1/usr/local/adm/adsm.mail
and have adsm.mail contain something like.
echo "See dsmsched.log for more details" | mail -s "Backup has finished"
[EMAIL PROTEC
Steve,
when doing server2server operation, destination server MUST have a valid
ARCHIVEPOOL with volumes ! Check this
Have you checked the IBM Redbook, It's really helpfull, and your do not need
a third server. I did not managed to do this stuff at the beginning and
after having read the redbook
Hi Jeff
refresh your browser or take this link to the latest version (4.1.2.12)
ftp://service.boulder.ibm.com/storage/tivoli-storage-management/maintenance/
client/v4r1/Windows/i386/LATEST/
Claude
-Ursprungliche Nachricht-
Von: Jeff Rankin [mailto:[EMAIL PROTECTED]]
Gesendet: Mittwoch, 1
Everyone,
Can we notify a client that the backup was successful/not successful after the backup
schedule finishes. Say a screen pops up with the message " Backup's done" or anything
thing else which sends a signal to the user about the Satus of his backup.
Regards.
Rajesh Oak
Get 250 color bu
We are using TSM to back up our DB2 UDB databases on Solaris 2.6 clients.
On the TSM server I have set the password expiry for all of the Solaris
nodes to .
However after a varying number of days the DB2 backups start failing with
137 api return codes
which are fixed by running the dsmapipw pa
Hi all,
I have this setup:
2 NT servers (Netfinity)(both installed with TSM 3.7):
- 1 is a TSM server 3.7
- both has TDP for Domino
- TSM server attached to the IBM 3447 DLT tape library
On the TSM client:
- the TDP for DOmino (GUI) can do backup and can also
list the backup from the restore opti
Jeff. I would like to sincerely thank you for that input. You were right
on the money. When IBM configured the library, they configured it as four
Logical Libraries. I just blew away that configuration and set it up as one
LL. Now my servers only see one library with four drives.
Thanks Very
The problem with the Emerald III based FC cards from JNI is that they do not
support the FC-Tape protocol. Their new Emerald IV based FC cards do support
FC-Tape.
- Original Message -
From: "Walker, Lesley R" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, March 14, 2001 4:32
Alexandre, I had a similar problem with a client I am working with and I
spoke with IBM and found that they have just certified an EMULEX LP8000S
(Sbus version) card. In my case I am working with the 3584 Ultrium Library -
but this same card might help in your situation.
Adolph
- Original Me
I bet you are correct Jeff. Via the front panel, it says the control paths
are required for all drives and it won't let me change it. I will work with
IBM tomorrow to find out why.
-jay
PS. I am in the 414 area code. (Milwaukee)
-Original Message-
From: Caffey, Jeff L. [mailto:[EMAIL
Hi Laura,
On Wed, 14 Mar 2001, Galvin, Laura L. wrote:
> and I'm getting a STK9710. Will I be able to move the tapes from on library
> to another? Or do I need to define another library, checkout the tapes from
> the old STK9714 ( 100 tapes ) and check them in to the new library STK9714.
We d
Herve,
Good idea but it does not seem to work. I can get all the defs done and
start an export but it always fails with the errors shown below.
I think I have an idea why it fails so let me explain.
Server1 has a diskpool but no tapepools. I have server1 diskpool migrate
to a virtual volumes in
Alexandre, I had a similar problem with a client I am working with and I
spoke with IBM and found that they have just certified an EMULEX LP8000S
(Sbus version) card. In my case I am working with the 3584 Ultrium Library -
but this same card might help in your situation.
Adolph
- Original
I have 3 FC connections from my TSM server (AIX) and one from each (3) SDG
into my McData SAN Director (ED-5000). All of those (6) connections are in
a zone by themselves. It sounds to me that Jay's problem might be that the
control path to the 3584 library is going across each LTO drive instead
Marc, see my previous append - you CAN restore an individual file using the
CLI (NOT the GUI nor the Web Client). You are correct in that you can
generate a backupset and specify the filespace(s) you want to have included
in the backup set.
Joerg Pohlmann
Marc Levitan <[EMAIL PROTECTED]>@VM.MA
Lesley Walker wrote:
> I have two FC64-1063 cards in an E4500, connecting to an EMC array. I
> installed the driver supplied by EMC (fcaw259).
Sorry, forgot to mention, I have also installed patches as specified by EMC
(back in November):
106541-12, 107458-10, 106924-06
I have run into this alot, and it took me hours to figure out what i was
doing.
(I wasn't running the command as root :)
shawn
___
Shawn Drew
Tivoli IT - ADSM/TSM Systems Administrator
[EMAIL PROTECTED]
bbullock <[EMAIL PROTECTED]>@VM.MAR
I have two FC64-1063 cards in an E4500, connecting to an EMC array. I
installed the driver supplied by EMC (fcaw259). At this moment I'm not
actually sure whether it's connected direct or through a switch - sounds
nuts, I know, but the server isn't in production yet, and the SAN stuff is
being a
This is a test mesg.
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
It sounds like the 'nohup' command on Solaris 8 now behaves the same
as AIX 4.3.3. It is looking for additional input from stdin. Try this and
see if it works :
nohup /opt/tivoli/tsm/client/ba/bin/dsmc sched -pass= >/dev/null
2>&1 -Original Message-
> From: Evans, William C [mailt
We have the same problem with one of our Netware 5.0 servers after we
upgraded the Service Pack to 6A. We applied the service pack to all 5.x
boxes (about 10), however only 1 is having problems.
Patrick Boutilier <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 03/14/2001
11:14:51 AM
Please respond to
Zoning for both the San Data Gateways and the Switches will probably help
that. If there are for example 4 drives on a san data gateway and 2 paths
from the switch to the san data gateway then you will have 8 drives because
each path sees all 4 drives. If you then have 2 fibre adapters going to
Folks,
I have just installed TSM version 3.7.1 on my Sun OS ver. 5.8 box. When I
start the dsm daemon, it quickly dies but gives me no errors. I've tried
several variations of;
nohup /opt/tivoli/tsm/client/ba/bin/dsmc sched -pass= 2>
/dev/null &
Each time the daemon starts and then dies witho
Hi
our TSM 4.1 Server is hosted on S/390 and we have TSM Clients running on
different platforms.All these platforms are connected to ESS.
these clients are registered through "managedsyslan" :
Number of Managed System for LAN licensed: 221
When or why should I license these managed systems for E
Strangely, *SM's database backup tapes do not show up when you do a Q
VOL xx. This may be true for export tapes as well. You can display
them if you do:
SELECT * FROM VOLHISTORY WHERE VOLUME_NAME='XX'
Of course, replace "XX" with the volser in question.
Alan Davenport
>AIX 4.3.2. TSM 3.7.3.6 client 3.7.2 Informix server 7.3.1 UC2
>
>I am having a problem that may or may not be related to TSM... This morning, a
>production server running Lawson with an Informix database locked up. All device
>files in /dev and two other files in my client BMC SQL-BackTrack for I
-Original Message-
From: Zosimo Noriega (ADNOC IS&T) [mailto:[EMAIL PROTECTED]]
Sent: Sunday, March 11, 2001 4:46 AM
To: [EMAIL PROTECTED]
Subject: NT server migration to Win2000 server.
Hi All!
We're planning to migrate all NT4 servers to Win2000 servers that Adsm
environment will be a
Q libv only shows tapes that are in your library - once DRM spits the tape
out, it won't show up there.
Q vol only shows tapes that are in storage pools.
Your tape is some other type, probably a data base backup tape (since DRM
spits those out along with the copy pool tapes, by default.)
Non-st
It is probably a database backup tape. Try q drm and the volume name...
You could look in the volume history file too, it would tell you when it was
created and for what purpose.
Mark
-Original Message-
From: Steve Hicks [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 14, 2001 2:23
We've been working on this problem for months now with no success and I'm hoping
someone else has ran into this and found a solution. One of our clients is
trying to do a scheduled backup of a Sun server. It always fails with an
"unable to contact client" error when using prompted or "client ha
q volhist. See what it thinks the tape was last used for. The try and
figure out why it was checked out of the library.
That's a good start.
-Original Message-
From: Steve Hicks [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 14, 2001 2:23 PM
To: [EMAIL PROTECTED]
Subject: TAPE DEFIN
AIX 4.3.2. TSM 3.7.3.6 client 3.7.2 Informix server 7.3.1 UC2
I am having a problem that may or may not be related to TSM... This morning, a
production server running Lawson with an Informix database locked up. All device
files in /dev and two other files in my client BMC SQL-BackTrack for Inform
If you REALLY want to see something neat, stop and start the device driver.
Every time you do that, the SCSI ID increments to the next highest number
not used. Our company installed a similar system for a client and
encountered this behavior as well as many other issues. Seems that the
"SCSI dri
I had that problem when I had too many paths going to the SDG's. I had two
FC Switches tiered together and both switches each had a path to two
separate SDG's. I removed the link between the FC Switches and the problem
went away.
In that case, I was seeing 8 libraries and 8 drives. Now I am do
Jay,
Does your NT server see 4 or 16 drives...?
I don't know how much help this is, but I'm running a similar environment
here. The only major difference is that my TSM server is an IBM RS/6000
(H80) running AIX 4.3.3... Anyway, within AIX, I see 15 drives and 3
libraries (like this):
rmt15
When I apply the latest PTF which is 3.1.2.90 (Because the old PTF's have
become corrupt) the "cfgserv3.log" tells me to use "UPGRADE DB" command
before I could start the server.
Should I use it before I run the restore db OR afterwards ?
Thanks once again.
Prasanna
-Original Message-
Hi,
We moved from a L18 tape library to a L32 library and just opened up the
library and moved the tapes manually. We made sure we kept them in the same
order that we pulled them out. We also looked at how the new library labeled
the slot numbers. We then put the tapes in those slots, and then we
I just went out to re-download the 4.1.2 install for Windows NT and the
website states "Note: The V4.1.2 server package has been temporarily
removed. APAR IC29552 is being investigated."
Unless I missed it somewhere, this hasn't been announced yet. Does
anyone know what's going on?
--
Jeff Rank
Hello all. I was wondering if anyone had this configuration? I am running
TSM 4.1.1 on a Netfinity 6000R with NT4SP6a. The server is connected to a
FC Fabric consisting of an IBM 2109-S16 FC Switch. This then connects via
longwave fibre to a SDG 2108-G07. Finally we get to attach the 4 tape
d
Hi guys,
I'm trying to set up a SAN using two IBM 2109-S16 FC Switch, six TSM Servers
and a 3494 with 10 3590E drives
Four TSM Servers are running smooth (1 M80, 2 Dell with FC Qlogic 2200, 1
SUN450 with FC Qlogic 2200). All of then are PCI Servers.
I have two other servers (E3500 and a E1)
On Wed, Mar 14, 2001 at 12:15:00PM -0500, David Longo wrote:
> The shadow passwd file on AIX is /etc/security/passwd. I would check all the
>permissions etc. on this file with some of my other AIX clients and see if there is
>any variance.
>
> I am not aware of *SM doing any checks on files oth
In general...
data tapes will be associated with the device class within an atl
in other words you may checkout all libvols, delete all drives, & delete the
library and all is still well !
Then if you define a new library, define your drives back to that new
library, (update your deviceclass for t
Oh might want to double check that statement...
last I checked it will not use to determine if the actual "archive" will
occur but it WILL (or used to) bind that file to any management class
specified...
example (last time I checked)
if you have the line in your inclexcl.list of
exclud
On Wed, Mar 14, 2001 at 11:55:24AM -0500, Richard Sims wrote:
> > 03/14/01 17:02:39 B/A Txn Consumer thread, fatal error, signal 11
> > 03/14/01 17:02:39 0xD01C8C08 shadow_pass_r
> > 03/14/01 17:02:39 0xD01C8930 shadow_chk_r
>
> The signal 11 is obviously a Segmentation Fault, which is a
The shadow passwd file on AIX is /etc/security/passwd. I would check all the
permissions etc. on this file with some of my other AIX clients and see if there is
any variance.
I am not aware of *SM doing any checks on files other than - can the user doing
backups access that file and is it new
Have you tried using a period in front of the name?
eg.
.backupuser.orgunit.org
Quoting Jim Kirkman <[EMAIL PROTECTED]>:
> Howdy,
>
> NW Client 4.1.1_18 talking to an ADSM 3.1.2.50 server on OS\390.
>
> I keep getting a login prompt when the scheduler kicks off, or if I run
> a
> manual. I'm
Jim Kirkman wrote:
> Brian, Richard, et.al,
>
> Netware is ver. 5.1, tsa nlms are the latest (12/2000). Network admin swears the
> dsm login has supervisor equivalency throughout ( and it looks that way to me as
> well). The login to netware server
> 'Athletics' wants .dsm.uncaa or user and conte
Hello Prasanna,
Oups, looks like you are ine kernel-panic-mode !
1) when your reinstall a server and want to restore the DB you
need to REFORMAT it before. You can use only the db-an-log primary volumes.
$ dsmserv format 2 log_primary.dsm log_addon.dsm 2 db_primary.dsm
db_addon.dsm
You SHOULD
Being a novice, I'm seeking out the Expert ADSM community to help me get
back my Flagship above water.
Here's the snapshot of things:
ADSM Server running on WINNT 4 crashed due to Recovery Log crash.
Expire inventory schedule brought down the server as it filled the recovery
log, asked for Tape,
> 03/14/01 17:02:39 B/A Txn Consumer thread, fatal error, signal 11
> 03/14/01 17:02:39 0xD01C8C08 shadow_pass_r
> 03/14/01 17:02:39 0xD01C8930 shadow_chk_r
The signal 11 is obviously a Segmentation Fault, which is a sofware
defect that should be reported to Tivoli Support for resolutio
I used TSMCLEAN on 2 different NT 4 server clients. The only issue I had
was users complaining of the performance hit because I ran it during the
work day. It basically impacts the system the same as a real backup
would, except I had about 20 times the normal backup amount because of all
the cor
Interesting,
We too have over 70 AIX clients on our TSM server, but I have 1
client that coughs the same error about once a week:
03/11/01 16:00:11 B/A Txn Consumer thread, fatal error, signal 11
03/11/01 16:00:11 0xD01D0BA0 shadow_pass_r
03/11/01 16:00:11 0xD01D08C8 sha
I have an AIX client which dumps core every time I try to backup
a particular 3.5GB fs. The log shows:
03/14/01 17:02:39 B/A Txn Consumer thread, fatal error, signal 11
03/14/01 17:02:39 0xD01C8C08 shadow_pass_r
03/14/01 17:02:39 0xD01C8930 shadow_chk_r
03/14/01 17:02:39 0xD01CA268
APAR IC28571 deals with this issue. It looks like you've come close to
hitting the nail on the head. But, I would suggest reviewing the APAR that
Tivoli currently has.
John G. Talafous IS Technical Principal
The Timken CompanyGlobal Software Support
P.O. Box 6927
Hi,
I'm in the process of upgrading my STK library. I currently have a STK9714
and I'm getting a STK9710. Will I be able to move the tapes from on library
to another? Or do I need to define another library, checkout the tapes from
the old STK9714 ( 100 tapes ) and check them in to the new libra
Howdy,
NW Client 4.1.1_18 talking to an ADSM 3.1.2.50 server on OS\390.
I keep getting a login prompt when the scheduler kicks off, or if I run a
manual. I'm using the fully qualified login name, and the pwd file has been
established in two of the three instances. I type in username and password
Gerrit,
Yes. Archive is not using the Include-Exclude list.
Steffan
Gerrit van Zyl wrote:
>
> Hi all TSM'ers,
>
> TSM Client 3.1.0.8 on NT
> TSM Server 3.1.2.58 on AIX
>
> I have the following scenario and hope someone can explain this to me.
> When archiving we get the following:
>
> 03/11/20
A backupset is the first self-discovery media created by Tivoli: you can
restore any part or all. The clients have been updated to understand
the format of the backupset directly.
Marc Levitan wrote:
>
> >From my understanding, no. A backupset is a flat file (.ost). It will be
> restored in it
>From my understanding, no. A backupset is a flat file (.ost). It will be
restored in it's entirety. However I do believe that you can define what
filespace the Backupset originally backs up. In other words, you can
backup only what you want to. Hope this helps.
Marc Levitan
Senior LAN Engin
Hello everybody.
I'm having a number of NT-servers (clients) and Win2000 Servers that I
guess would
be best to install/run this patch on.
Does anybody have any experiences of using the Client-Patch 4.1.2.12 on
Win32 ?
I also have a few Ms Clusterservers ( NT 4.0 ) that I also have to do
this on
Hi everybody,
I updated several NT Boxes from ADSM 3.1 to TSM 4.1.16. After a reboot I saw
in the eventlog an error something like : "PERFLIB: DSMCPERF.DLL is missing".
In this case,I went to the following registry entry, and I`d deleted the 'open'
and 'library' key.
H KEY LOCAL MACHINE/SYSTEM
look at copygroup MODE parameter, ABSOLUTE vs MODIFIED. This works for a
non-DB files just fine for controlling FULL vs INCREMENTAL. I do not know
how well it fits with a DB. I would suspect you would have to go through an
API to do an incremental.
Matt
-Original Message-
From: Shekhar
Hi all TSM'ers,
TSM Client 3.1.0.8 on NT
TSM Server 3.1.2.58 on AIX
I have the following scenario and hope someone can explain this to me.
When archiving we get the following:
03/11/2001 03:54:57 ANE4952I (Session: 7758, Node: NTSRV01) Total
number of objects inspected: 461,739
03/11/2001 03
Hi Steve,
I did the trip last month for one of my customer.
Do not need to export to a shared FS, you can directly
try "Server-to-server" export. It works fine.
The "key-step" (which I forgot to do the first time) is the
"loopback" devclass.
You can have a look at this piece of redbook : SG24524
64 matches
Mail list logo
