YOU MUST USE THE GATEWAY CREDENTIALS TO MAKE THE CHANGE ON INSIGHT2.
It should prompt this. It should be added to the configuration in the quick start manual. That was suggested during beta but has not been done yet. HINT HINT Schneider! https://41j5tc3akbrn3uezx5av0jj1bgm-wpengine.netdna-ssl.com/wp-content/uploads/2019/02/ml201912_conext-insight-2-quick-start-guide-975-0953-01-02.pdf [1] Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ [2] e-mail offgridso...@sti.net [3] text 209 813 0060 On Fri, 31 Jan 2020 07:10:29 -0700, Mac Lewis wrote: Hi Wrenches, I am working with Schneider on this but I haven't heard back in a few days so I thought I'd put it out to the list to see if anyone else has worked through this. We recently installed our first Conext Gateway in hopes of getting better monitoring and control through Insight 2 portal. We installed it on an XW 5548, AGS, Batt Mon, HV-MPPT charge controller ~ 4 years old. For some reason, we cannot make changes to the system via the portal. The monitoring is much better but the control isn't functional. When I make a parameter change, it asks for the username and password but then gives this error every time: Mac Lewis "Yo solo sé que no sé nada." -Sócrates Links: ------ [1] https://41j5tc3akbrn3uezx5av0jj1bgm-wpengine.netdna-ssl.com/wp-content/uploads/2019/02/ml201912_conext-insight-2-quick-start-guide-975-0953-01-02.pdf [2] http://members.sti.net/offgridsolar/ [3] mailto:offgridso...@sti.net
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
