I worked for Extreme, and I deployed a lot of X650 (24 10G ports) for DataCenter environment. The box is really good. In fact if you use the box at a layer 2 it is perfect, BUT DON'T use their BGP code, they never understood what is BGP :)
Regards Fabien Le 27 janv. 2012 à 09:54, Grant Ridder a écrit : > I have experience with the Extreme's Alpine, Blackdiamond, x250, and x450 > and i discovered that the command line is fairly different than Cisco, HP, > or Dell. However, since they are a relatively small company with a small > but strong customer base, their support is fairly good. I can't speak for > 10G/40G implementations, but from my experiences, they support has a quick > response time and they do quite a bit of lab replication to figure out the > exact root cause. > > -Grant > > On Fri, Jan 27, 2012 at 2:32 AM, Erik Bais <eb...@a2b-internet.com> wrote: > >> We have a full purple network, so my answer for this would be Extreme >> Networks. >> >> Check out the Lipis report on the X670 / x670v 48 port 10G 1U switches. >> >> vs other vendor equipment : >> >> http://www.extremenetworks.com/libraries/products/ExtremeX670V_Lippis%20Report_Fall.pdf >> >> >> Regards, >> Erik Bais >> >> Verstuurd vanaf mijn iPad >> >> Op Jan 26, 2012 om 21:20 heeft Deric Kwok <deric.kwok2...@gmail.com> het >> volgende geschreven: >> >>> Hi all >>> >>> I would like to have 10G switchrecommendaton >>> Ipref software can test around 9.2G but we can have congestion over 6G >>> in single port! >>> >>> Thank you >>> >> >>