Hallo > > > I commented out the msleep definition in zoran-i2c-compat.h, and now it > > > builds OK. > > > > That ist likley because there are some changes for the 2.6 kernel > > included. > Maybe a case for an #ifdef ? I think no one will integate these things. And there are some pending patches with whill make the cvs version very likely fail to compile. on the 2.4.x kernel.
> > What command do you use ? If you don't use the -U/--use-read option try > > to add it to the lavrec command. > I did use --use-read. Shutting everything else down and doing it from a bare > command line seems to help. Ok, in you mail before you did no use it. > > That problem ist soundcard related. What sound card do you use ? Using a > > different sound card might also solve the problem. > Just an i810 built in sound chip. Anyway, it seems to have gone away now. Maybe.... > Now, however, I get a different problem. After approximately 15-20 minutes of > recording, lavrec starts losing frames badly. Upon reviewing it, the stream > appears to get corrupted. Is there any particular debug output that would be > useful to report back on this? That could also be sound card related. If you have access to a sound card please try another sound card. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Mjpeg-users mailing list Mjpeg-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mjpeg-users