Hallo > > 7,099,766.55 bytes/sec / 1024 = 6933.366 kbyte/second > > > > 6933.366 kbyte/second / 1024 = 6.771 MB/second of actual real capture > > rate to disk for everything, video, audio, and sync/marker data. > > > > And that's at a quality setting of 75, bumping that up to 100 does > > push lavrec very close to the 10mb/sec data rate to disk using a DC10+ > > Wow. I wonder how the formula in the howto was derived. That formula was defeloped a long time ago. But you should be able to find out why it goes that way if you take a close look at zoran chipdocu. The 200 is correct for older drivers, like the releases befor 0.9.x And still correct for every card where you load the zr36060 module with the low_bitrate=1 option. Like it is (and hast to be) for the buz. For every other card you shoul use now 100 instead of 200.
Seems that I should update the doku a litte. auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
