On 2018/10/30 09:05, Josh Luthman via Mikrotik-users wrote:
> .122 is the remote router that's having issues sticking together with 
> OSPF.  I got some debug log that can hopefully spark some ideas.
>
> Oct/30/2018 10:59:27 route,ospf,debug LSA Update received: Installing 
> and flooding it
> Oct/30/2018 10:59:27 route,ospf,debug     header=Router LSA 
> id=10.255.0.14 originator=10.255.0.14 seqnum=0x8000221a
> Oct/30/2018 10:59:27 route,ospf,debug Installing an LSA
> Oct/30/2018 10:59:27 route,ospf,debug     lsa=Router LSA id=10.255.0.14 
> originator=10.255.0.14 seqnum=0x8000221a
> Oct/30/2018 10:59:27 route,ospf,debug     old=Router LSA id=10.255.0.14 
> originator=10.255.0.14 seqnum=0x80002219
> Oct/30/2018 10:59:27 route,ospf,debug Flooding an LSA
> Oct/30/2018 10:59:27 route,ospf,debug     lsa=Router LSA id=10.255.0.14 
> originator=10.255.0.14 seqnum=0x8000221a
> Oct/30/2018 10:59:27 route,ospf,debug     area=backbone
> Oct/30/2018 10:59:27 route,ospf,debug Adding to neighbor's retransmit list
> Oct/30/2018 10:59:27 route,ospf,debug     lsa=Router LSA id=10.255.0.14 
> originator=10.255.0.14 seqnum=0x8000221a
> Oct/30/2018 10:59:27 route,ospf,debug     neighbor=10.255.0.1
> Oct/30/2018 10:59:27 route,ospf,debug     number of retransmits=2
> Oct/30/2018 10:59:27 route,ospf,debug Deleting an LSA
> Oct/30/2018 10:59:27 route,ospf,debug     lsa=Router LSA id=10.255.0.14 
> originator=10.255.0.14 seqnum=0x80002219


^^^^ This part make me ask if your OSPF router-id IP is on a loopback 
type interface, bridge with no other interfaces, or could it be on an 
interface which could possibly bounce?  Even if it's not on the 
interface which is involved in the link between the two routers.

Tunneling OSPF over EoIP was usually to get around wireless device's not 
passing broadcast traffic properly, PtP or NBMA network types would 
usually fix that, or to keep OSPF from noticing a short interface 
down/up cycle.  I have never had to resort to using a tunnel to keep 
OSPF happy.  I have used OSPF over tunnels, but not for reliability reasons.

-- 
Scott Lambert                  KC5MLE                     Unix SysAdmin
lamb...@lambertfam.org
_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org
http://lists.wispa.org/mailman/listinfo/mikrotik-users

Reply via email to