time server sync?
On 10/30/18 7:33 AM, Josh Luthman via Mikrotik-users wrote: > I have an rb750 and CCR1009 both with 6.34.4 and their latest firmware. > They'll match right up and then after 6-12 hours they refuse to talk > OSPF. Once it "locks up" I'll get this constantly: > > 10:07:24 route,ospf,info OSPFv2 neighbor 10.255.0.14 > <http://10.255.0.14>: state change from Exchange to 2-Way > 10:08:05 route,ospf,info OSPFv2 neighbor 10.255.0.14 > <http://10.255.0.14>: state change from Exchange to 2-Way > 10:08:05 route,ospf,info Ignoring Link State Acknowledgment packet: > wrong peer state > 10:08:05 route,ospf,info state=ExStart > 10:08:46 route,ospf,info OSPFv2 neighbor 10.255.0.14 > <http://10.255.0.14>: state change from Exchange to 2-Way > 10:09:27 route,ospf,info OSPFv2 neighbor 10.255.0.14 > <http://10.255.0.14>: state change from Exchange to 2-Way > > Now if I go to the 10.255.0.14 router (this is a management address, the > OSPF network is public space) and simply disable and enable the OSPF > network, it comes right back - again for 6-12 hours. > > Any ideas or suggestions? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > _______________________________________________ > Mikrotik-users mailing list > Mikrotik-users@wispa.org > http://lists.wispa.org/mailman/listinfo/mikrotik-users > _______________________________________________ Mikrotik-users mailing list Mikrotik-users@wispa.org http://lists.wispa.org/mailman/listinfo/mikrotik-users
