Jeff York wrote: > Some of the KR's at the gathering which had cold air intakes simular to > mine had some type of tubular runner sealing them. You need to purchasethe EAA book "Tony Bingelis on Engines". That has a lot of info you need. Chapter 4 in particular is about engine baffling, You can make those rubber seals you saw out of fiberglass strips (multiple layers imprgneted with high temp silicone RTV). Use a squeegee and waxed paper to layup the finished sides for a smooth rubber seal and cut to the desired size and shape after it cures. how they are installed is very important.
-- Glenn Martin KR2 N1333A 13238 Hudson-Krohn Rd. Biloxi, MS, 39532 rep...@martekmississippi.com
