Steve,
We use a router table to cut and also engrave aluminum for these
custom Vet trucks. It will amaze you all the things you can use it
for if you buy a sign engraving program. Bobby
> For the past year or so we've been house shopping since what we have now
> is
> just barely adequate for housing the family. Garage is wall to wall stuff
> thanks to my office being built into it, so little room for a huge table.
> This morning we made an offer on a place with, among other things, a 3 car
> garage and a huge office. So if things work out right I'll actually get to
> start building in the fall. The 3rd bay is an addition to the original
> garage, with finished walls and benches on both sides, so it'll be a
> perfect
> spot for my new toy, a 60 x 24 CNC router :) Airfoil templates are going
> to
> be a piece of cake and insanely accurate.
>
> Off to bed with me now. Have to get up and fly halfway across Texas for an
> annual in the morning. The things we do to save $900... ;)
> --
> Steve
> 33...@swbell.net
> N3343V- '75 C150M
> N205FT- KR1 #6170
> He who seeks will find, and he who knocks will be let in.
>
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
>
