Look closely at workmanship. Especially the WAF.
-----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Steve Bray Sent: Sunday, December 04, 2005 9:51 AM To: kr...@mylist.net Subject: Re: KR> (no subject) There is a KR-1 on ebay today built for a tall man, it sez. Steve Bray Jackson, Tennessee >From: VIRGIL N SALISBURY <virg...@juno.com> >Reply-To: KRnet <kr...@mylist.net> >To: kr...@mylist.net >Subject: Re: KR> (no subject) >Date: Sun, 4 Dec 2005 10:15:43 -0500 > > Kens KR-I was made to fit Stu Robinson. Ken put pillows in to fit >himself, Virg > >On Sat, 3 Dec 2005 20:44:07 -0800 "Joe Beyer" <fly...@spiretech.com> >writes: > > Message: 1 > > Date: Sat, 3 Dec 2005 12:28:36 +0200 > > From: "gielmarais" <gieljmar...@mweb.co.za> > > Subject: KR> KR1 > > To: <kr...@mylist.net> > > Message-ID: <000001c5f7f4$fe4a99f0$8fde17c4@private7ru2gv0> > > Content-Type: text/plain; charset="iso-8859-1" > > > > >I would like to know what the average pilot size is for the KR1 . > > >Can a KR1 be made to fit a pilot of the following dimensions: > > >6 foot 3 inches, weight 205 Pounds. > > >cockpit width required is 24 inches. > > >KR1 to be fitted with 1600 vw engine. > > > > >Info required before placing order for plan. > > > > >Thanking you in anticipation > > > > >G.V. Strutt > > > > I fly a KR-2 on a 1641cc type one VW with a force one type hub that > > I made. > > That's the first over sized slip in, no machine work required on the > > case > > and heads. The performance is about like a Cessna 150. If I were > > building a > > KR-1, I would use the KR-2 plans and not make the fuselage as wide > > as shown > > in those plans. A 1600cc engine would work out well for the KR-1. > > > > -Joe > > > > > > _______________________________________ > > Search the KRnet Archives at > > http://www.maddyhome.com/krsrch/index.jsp > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > > > >Virgil N. Salisbury - AMSOIL >www.lubedealer.com/salisbury >Miami ,Fl > >_______________________________________ >Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html *The information contained in this message may be confidential and/or subject to legal privilege, and is for the use of the intended addressee only. Any unauthorized use, dissemination or copying of the information in this message is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message.*
