Glass the wing so there is only a 1/8" gap except for the 1" X 3" area by the fittings. Silicone the 1/8" gap and mold fiberglass inserts that fit flush in the 1" X 3" cutouts.
That is the way mine was with the exception that I had not made the fiberglass inserts yet. I was still using the original covers for the holes which were made of aluminum rectangles a little biger than the holes with tabs on the inside and two springs inside to squeeze them to the wings. Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of Mark Langford Sent: Thursday, May 05, 2005 10:56 PM To: KRnet Subject: KR> wing gap seals/covers OK, I've already heard all the ways to fill the stub-to-outer wing gap, but it wouldn't hurt to hear 'em all again. I've just stuck the wings on and I recall that I need to fill that 1" gap that I need to do something about... Thanks, Mark Langford, Huntsville, Alabama see KR2S project N56ML at http://home.hiwaay.net/~langford email to N56ML "at" hiwaay.net -------------------------------------------------------------- _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
