It did sag just a little, but I taped it all around. This time, I am going to support from the underside with a support that presses against the wing and hangar floor, to get it a little better. I also used double sided tape for the final installation on that portion of the underside that goes between the two spars.
I would like to see more pictures of the aft attach mechanism that allows it to be pulled tight. I have a drawing from Steve, but am still a little unclear on how that works and attaches. On the Beast, I made blind nut fittings that attached to the WAF bolts. See you in Mt. Vernon - 2005 - KR Gathering See N64KR at http://KR-Builder.org - Then click on the pics There is a time for building and a time for FLYING and the time for building has expired. Daniel R. Heath - Columbia, SC -------Original Message------- From: Martindale Family List-Post: krnet@list.krnet.org Date: 05/06/05 05:39:13 To: KRnet Subject: Re: KR> wing gap seals/covers Sounds neat Dan. How did you stop it sagging underneath as it cured? John The Martindale Family 29 Jane Circuit TOORMINA NSW 2452 AUSTRALIA phone: 61 2 66584767 email: johnja...@optusnet.com.au > Actually, that is quite easy. _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
