WH Bouterse wrote:
> I am presently using L-M 6.1 Helios
> Thanks for the response!
>
> My printtool config is as follows:
> Name lp
> Spool Directory /var/spool/lpd/lp
> Printer Device /dev/lp0
> Input Filter DeskJet 850
>
> The ASCHII "directly to port" test prints the proper line
> The other tests go to the que and wait
>
> #'lpr filename' ques and does nothing
> #'lpr -Plp' filename , the same
>
> #'lpc stat' gives
> lp:
> queuing is enabled
> printing is disabled
> no entries
> no daemon present
>
> Even when 'lpd restart' is done and even rebooting the machine
> 'lpc stat' shows "no daemon present" and "printing disabled"
>
> A least I have seen where the problem "may" be but don't know what to do
> next?
>
> Thanks for any help or ideas!
>
> William Bouterse
> Juneau Alaska
FIrst, change the print device to the HP 550c, ... 6xxc series
Then see if you have the same problem
Lots of 850s and 870s were shipped which will not respond to the language
they are spec'd for.
Civileme
Same problem here in Kotzebue. That was the fix.
